PROFILBARU.COM

Specifications
Specifications
Configuration:;
• Whyte	2-6-0 (Mogul)
• UIC	1'Cn2
Driver	2nd coupled axle
Gauge	3 ft 6 in (1,067 mm) Cape gauge
Leading dia.	26 in (660 mm)
Coupled dia.	42 in (1,067 mm)
Tender wheels	28+1⁄2 in (724 mm)
Wheelbase	38 ft 2 in (11,633 mm)
• Axle spacing; (Asymmetrical)	1-2: 5 ft 5 in (1,651 mm); 2-3: 5 ft 4 in (1,626 mm)
• Engine	18 ft (5,486 mm)
• Coupled	10 ft 9 in (3,277 mm)
• Tender	10 ft (3,048 mm)
• Tender bogie	4 ft 6 in (1,372 mm)
Length:;
• Over couplers	46 ft 6 in (14,173 mm)
Height	12 ft 3 in (3,734 mm)
Frame type	Bar
Axle load	9 LT 16 cwt 3 qtr (9,995 kg)
• Leading	2 LT 19 cwt (2,997 kg)
• 1st coupled	9 LT 2 cwt 3 qtr (9,284 kg)
• 2nd coupled	9 LT 16 cwt 3 qtr (9,995 kg)
• 3rd coupled	9 LT 6 cwt 3 qtr (9,487 kg)
Adhesive weight	28 LT 6 cwt 1 qtr (28,770 kg)
Loco weight	31 LT 5 cwt 1 qtr (31,760 kg)
Tender weight	22 LT (22,350 kg)
Total weight	53 LT 5 cwt 1 qtr (54,120 kg)
Tender type	3-axle (1 leading, 1 bogie)
Fuel type	Coal
Fuel capacity	6 LT (6.1 t)
Water cap.	2,000 imp gal (9,090 L)
Firebox:
• Type	Round-top
• Grate area	13.7 sq ft (1.27 m2)
Boiler:;
• Pitch	5 ft 9 in (1,753 mm)
• Tube plates	9 ft 6 in (2,896 mm)
Boiler pressure	160 psi (1,103 kPa)
Heating surface:
• Firebox	67 sq ft (6.2 m2)
• Tubes	675 sq ft (62.7 m2)
• Total surface	742 sq ft (68.9 m2)
Cylinders	Two
Cylinder size	15 in (381 mm) bore; 18 in (457 mm) stroke
Valve gear	Stephenson
Couplers	Johnston link-and-pin

Type and origin
Type and origin
Power type	Steam
Designer	Baldwin Locomotive Works
Builder	Baldwin Locomotive Works
Serial number	18566-18567
Build date	1901
Total produced	2

Zululand Railway 2-6-0
NGR Class I 2-6-0
Zululand Railway 2-6-0; NGR Class I 2-6-0
	Zululand Railway Company no. 2, c. 1902
Power type
Type and origin
Power type	Steam
Designer	Baldwin Locomotive Works
Builder	Baldwin Locomotive Works
Serial number	18566-18567
Build date	1901
Total produced	2
Configuration:;
Specifications
Configuration:;
• Whyte	2-6-0 (Mogul)
• UIC	1'Cn2
Driver	2nd coupled axle
Gauge	3 ft 6 in (1,067 mm) Cape gauge
Leading dia.	26 in (660 mm)
Coupled dia.	42 in (1,067 mm)
Tender wheels	28+1⁄2 in (724 mm)
Wheelbase	38 ft 2 in (11,633 mm)
• Axle spacing; (Asymmetrical)	1-2: 5 ft 5 in (1,651 mm); 2-3: 5 ft 4 in (1,626 mm)
• Engine	18 ft (5,486 mm)
• Coupled	10 ft 9 in (3,277 mm)
• Tender	10 ft (3,048 mm)
• Tender bogie	4 ft 6 in (1,372 mm)
Length:;
• Over couplers	46 ft 6 in (14,173 mm)
Height	12 ft 3 in (3,734 mm)
Frame type	Bar
Axle load	9 LT 16 cwt 3 qtr (9,995 kg)
• Leading	2 LT 19 cwt (2,997 kg)
• 1st coupled	9 LT 2 cwt 3 qtr (9,284 kg)
• 2nd coupled	9 LT 16 cwt 3 qtr (9,995 kg)
• 3rd coupled	9 LT 6 cwt 3 qtr (9,487 kg)
Adhesive weight	28 LT 6 cwt 1 qtr (28,770 kg)
Loco weight	31 LT 5 cwt 1 qtr (31,760 kg)
Tender weight	22 LT (22,350 kg)
Total weight	53 LT 5 cwt 1 qtr (54,120 kg)
Tender type	3-axle (1 leading, 1 bogie)
Fuel type	Coal
Fuel capacity	6 LT (6.1 t)
Water cap.	2,000 imp gal (9,090 L)
Firebox:
• Type	Round-top
• Grate area	13.7 sq ft (1.27 m2)
Boiler:;
• Pitch	5 ft 9 in (1,753 mm)
• Tube plates	9 ft 6 in (2,896 mm)
Boiler pressure	160 psi (1,103 kPa)
Heating surface:
• Firebox	67 sq ft (6.2 m2)
• Tubes	675 sq ft (62.7 m2)
• Total surface	742 sq ft (68.9 m2)
Cylinders	Two
Cylinder size	15 in (381 mm) bore; 18 in (457 mm) stroke
Valve gear	Stephenson
Couplers	Johnston link-and-pin
Tractive effort
Performance figures
Tractive effort	11,570 lbf (51 kN) @ 75%
Operators
Career
Operators	Zululand Railway Co.; Natal Government Railways
Class	NGR Class I
Number in class	2
Numbers	ZRC 2-3, NGR 513-514 & 502-503
Delivered	1902
First run	1902
Withdrawn	1930

The Natal Government Railways Class I 2-6-0 of 1902 was a South African steam locomotive from the pre-Union era in the Colony of Natal.

In 1902, the Zululand Railway Company, contractors for the construction of the North Coast line from Verulam to the Tugela River, acquired two 2-6-0 tender locomotives as construction engines. Upon completion of the line, the locomotives were taken onto the roster of the Natal Government Railways in 1903 and later designated Class I.^[1]^[2]

The Zululand Railway Co.

In December 1895, an agreement was reached with the Natal sugar magnate James Liege Hulett, representing the Zululand Railway Company, for the construction of the North Coast line from Verulam to the Tugela River. The contract stipulated that the line was to be 3 feet 6 inches Cape gauge and laid with 45 pounds per yard (22 kilograms per metre) steel rail. The agreement further stipulated that, upon its completion, the line would be taken over as part of the Natal Government Railways (NGR) system.^[1]^[2]

Manufacturer

In 1901, the construction company acquired a single 2-6-2 tank locomotive from Baldwin Locomotive Works in the United States of America. In 1902, two 2-6-0 tender locomotives were added, designed and built by the same manufacturer. They were built to American specifications and narrow-gauge practice at the time and conformed to NGR practice only in respect of their Johnston link-and-pin couplers and brake gear. The two tender locomotives became the Zululand Railway engines numbers 2 and 3.^[1]^[2]^[3]

The three-axle tenders had an unusual wheel arrangement, with the front axle mounted in a rigid frame and the other two axles in a bogie. A similar tender wheel arrangement had first been used in 1884 on the experimental 3rd Class 4-4-0 and 4th class 4-6-0TT locomotives of the Cape Government Railways (CGR). It was not used in South Africa again.^[2]^[3]

Service

The Tugela line was opened to traffic in 1903 and the two locomotives were taken onto the NGR roster, where they were allocated numbers 513 and 514.^[1]^[2]

They were later renumbered to 502 and 503 and allocated to the Construction Department of the NGR. When a classification system was introduced at some stage between 1904 and 1908, they were designated NGR Class I.^[4]^[5]

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (Cape Government Railways, NGR and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.^[5]^[6]

In 1912, the NGR Construction Department locomotives were considered obsolete and were excluded from the SAR classification and renumbering schedules. These two locomotives were renumbered to 0502 and 0503 and remained unclassified. In spite of being considered obsolete, the two engines remained in service for several more years and were only scrapped in March 1928 and June 1930 respectively.^[5]^[7]

References

^ ^a ^b ^c ^d Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 36, 96–97. ISBN 978-0-7153-5382-0.
^ ^a ^b ^c ^d ^e Espitalier, T.J.; Day, W.A.J. (1944). The Locomotive in South Africa – A Brief History of Railway Development. Chapter III – Natal Government Railways (Continued). South African Railways and Harbours Magazine, September 1944. p. 671.
^ ^a ^b Dulez, Jean A. (2012). Railways of Southern Africa 150 Years (Commemorating One Hundred and Fifty Years of Railways on the Sub-Continent – Complete Motive Power Classifications and Famous Trains – 1860–2011) (1st ed.). Garden View, Johannesburg, South Africa: Vidrail Productions. pp. 22–23, 25–26. ISBN 9 780620 512282.
^ The Railway Report for year ending 31 Dec. 1908, Natal Government Railways, p. 39, par 14.
^ ^a ^b ^c Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, p. 2 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
^ The South African Railways – Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
^ Ex Zululand locomotives in SAR service