A primary goal of numerical relativity is to study spacetimes whose exact form is not known. The spacetimes so found computationally can either be fully dynamical, stationary or static and may contain matter fields or vacuum. In the case of stationary and static solutions, numerical methods may also be used to study the stability of the equilibrium spacetimes. In the case of dynamical spacetimes, the problem may be divided into the initial value problem and the evolution, each requiring different methods.
Numerical relativity is applied to many areas, such as cosmologicalmodels, critical phenomena, perturbedblack holes and neutron stars, and the coalescence of black holes and neutron stars, for example. In any of these cases, Einstein's equations can be formulated in several ways that allow us to evolve the dynamics. While Cauchy methods have received a majority of the attention, characteristic and Regge calculus based methods have also been used. All of these methods begin with a snapshot of the gravitational fields on some hypersurface, the initial data, and evolve these data to neighboring hypersurfaces.[1]
Like all problems in numerical analysis, careful attention is paid to the stability and convergence of the numerical solutions. In this line, much attention is paid to the gauge conditions, coordinates, and various formulations of the Einstein equations and the effect they have on the ability to produce accurate numerical solutions.
Numerical relativity research is distinct from work on classical field theories as many techniques implemented in these areas are inapplicable in relativity. Many facets are however shared with large scale problems in other computational sciences like computational fluid dynamics, electromagnetics, and solid mechanics. Numerical relativists often work with applied mathematicians and draw insight from numerical analysis, scientific computation, partial differential equations, and geometry among other mathematical areas of specialization.
The field of numerical relativity emerged from the desire to construct and study more general solutions to the field equations by approximately solving the Einstein equations numerically. A necessary precursor to such attempts was a decomposition of spacetime back into separated space and time. This was first published by Richard Arnowitt, Stanley Deser, and Charles W. Misner in the late 1950s in what has become known as the ADM formalism.[3] Although for technical reasons the precise equations formulated in the original ADM paper are rarely used in numerical simulations, most practical approaches to numerical relativity use a "3+1 decomposition" of spacetime into three-dimensional space and one-dimensional time that is closely related to the ADM formulation, because the ADM procedure reformulates the Einstein field equations into a constrainedinitial value problem that can be addressed using computational methodologies.
At the time that ADM published their original paper, computer technology would not have supported numerical solution to their equations on any problem of any substantial size. The first documented attempt to solve the Einstein field equations numerically appears to be by S. G. Hahn and R. W. Lindquist in 1964,[4] followed soon thereafter by Larry Smarr[5][6] and by K. R. Eppley.[7] These early attempts were focused on evolving Misner data in axisymmetry (also known as "2+1 dimensions"). At around the same time Tsvi Piran wrote the first code that evolved a system with gravitational radiation using a cylindrical symmetry.[8] In this calculation Piran has set the foundation for many of the concepts used today in evolving ADM equations, like "free evolution" versus "constrained evolution",[clarification needed] which deal with the fundamental problem of treating the constraint equations that arise in the ADM formalism. Applying symmetry reduced the computational and memory requirements associated with the problem, allowing the researchers to obtain results on the supercomputers available at the time.
Early results
The first realistic calculations of rotating collapse were carried out in the early eighties by Richard Stark and Tsvi Piran[9] in which the gravitational wave forms resulting from formation of a rotating black hole were calculated for the first time. For nearly 20 years following the initial results, there were fairly few other published results in numerical relativity, probably due to the lack of sufficiently powerful computers to address the problem. In the late 1990s, the Binary Black Hole Grand Challenge Alliance successfully simulated a head-on binary black hole collision. As a post-processing step the group computed the event horizon for the spacetime. This result still required imposing and exploiting axisymmetry in the calculations.[10]
Some of the first documented attempts to solve the Einstein equations in three dimensions were focused on a single Schwarzschild black hole, which is described by a static and spherically symmetric solution to the Einstein field equations. This provides an excellent test case in numerical relativity because it does have a closed-form solution so that numerical results can be compared to an exact solution, because it is static, and because it contains one of the most numerically challenging features of relativity theory, a physical singularity. One of the earliest groups to attempt to simulate this solution was Peter Anninos et al. in 1995.[11] In their paper they point out that
"Progress in three dimensional numerical relativity has been impeded in part by lack of computers with sufficient memory and computational power to perform well resolved calculations of 3D spacetimes."
Maturation of the field
In the years that followed, not only did computers become more powerful, but also various research groups developed alternate techniques to improve the efficiency of the calculations. With respect to black hole simulations specifically, two techniques were devised to avoid problems associated with the existence of physical singularities in the solutions to the equations: (1) Excision, and (2) the "puncture" method. In addition the Lazarus group developed techniques for using early results from a short-lived simulation solving the nonlinear ADM equations, in order to provide initial data for a more stable code based on linearized equations derived from perturbation theory. More generally, adaptive mesh refinement techniques, already used in computational fluid dynamics were introduced to the field of numerical relativity.
Excision
In the excision technique, which was first proposed in the late 1990s,[12] a portion of a spacetime inside of the event horizon surrounding the singularity of a black hole is simply not evolved. In theory this should not affect the solution to the equations outside of the event horizon because of the principle of causality and properties of the event horizon (i.e. nothing physical inside the black hole can influence any of the physics outside the horizon). Thus if one simply does not solve the equations inside the horizon one should still be able to obtain valid solutions outside. One "excises" the interior by imposing ingoing boundary conditions on a boundary surrounding the singularity but inside the horizon.
While the implementation of excision has been very successful, the technique has two minor problems. The first is that one has to be careful about the coordinate conditions. While physical effects cannot propagate from inside to outside, coordinate effects could. For example, if the coordinate conditions were elliptical, coordinate changes inside could instantly propagate out through the horizon. This then means that one needs hyperbolic type coordinate conditions with characteristic velocities less than that of light for the propagation of coordinate effects (e.g., using harmonic coordinates coordinate conditions). The second problem is that as the black holes move, one must continually adjust the location of the excision region to move with the black hole.
The excision technique was developed over several years including the development of new gauge conditions that increased stability and work that demonstrated the ability of the excision regions to move through the computational grid.[13][14][15][16][17][18] The first stable, long-term evolution of the orbit and merger of two black holes using this technique was published in 2005.[19]
Punctures
In the puncture method the solution is factored into an analytical part,[20] which contains the singularity of the black hole, and a numerically constructed part, which is then singularity free. This is a generalization of the Brill-Lindquist [21] prescription for initial data of black holes at rest and can be generalized to the Bowen-York[22] prescription for spinning and moving black hole initial data. Until 2005, all published usage of the puncture method required that the coordinate position of all punctures remain fixed during the course of the simulation. Of course black holes in proximity to each other will tend to move under the force of gravity, so the fact that the coordinate position of the puncture remained fixed meant that the coordinate systems themselves became "stretched" or "twisted," and this typically led to numerical instabilities at some stage of the simulation.
2005's Breakthrough (annus mirabilis of numerical relativity)
In 2005, a group of researchers demonstrated for the first time the ability to allow punctures to move through the coordinate system, thus eliminating some of the earlier problems with the method. This allowed accurate long-term evolutions of black holes.[19][23][24] By choosing appropriate coordinate conditions and making crude analytic assumption about the fields near the singularity (since no physical effects can propagate out of the black hole, the crudeness of the approximations does not matter), numerical solutions could be obtained to the problem of two black holes orbiting each other, as well as accurate computation of gravitational radiation (ripples in spacetime) emitted by them. 2005 was renamed the "annus mirabilis" of numerical relativity, 100 years after the annus mirabilispapers of special relativity (1905).
Lazarus project
The Lazarus project (1998–2005) was developed as a post-Grand Challenge technique to extract astrophysical results from short lived full numerical simulations of binary black holes. It combined approximation techniques before (post-Newtonian trajectories) and after (perturbations of single black holes) with full numerical simulations attempting to solve Einstein's field equations.[25] All previous attempts to numerically integrate in supercomputers the Hilbert-Einstein equations describing the gravitational field around binary black holes led to software failure before a single orbit was completed.
The Lazarus project approach, in the meantime, gave the best insight into the binary black hole problem and produced numerous and relatively accurate results, such as the radiated energy and angular momentum emitted in the latest merging state,[26][27] the linear momentum radiated by unequal mass holes,[28] and the final mass and spin of the remnant black hole.[29] The method also computed detailed gravitational waves emitted by the merger process and predicted that the collision of black holes is the most energetic single event in the Universe, releasing more energy in a fraction of a second in the form of gravitational radiation than an entire galaxy in its lifetime.
Adaptive mesh refinement
Adaptive mesh refinement (AMR) as a numerical method has roots that go well beyond its first application in the field of numerical relativity. Mesh refinement first appears in the numerical relativity literature in the 1980s, through the work of Choptuik in his studies of critical collapse of scalar fields.[30][31] The original work was in one dimension, but it was subsequently extended to two dimensions.[32] In two dimensions, AMR has also been applied to the study of inhomogeneous cosmologies,[33][34] and to the study of Schwarzschild black holes.[35] The technique has now become a standard tool in numerical relativity and has been used to study the merger of black holes and other compact objects in addition to the propagation of gravitational radiation generated by such astronomical events.[36][37]
Recent developments
In the past few years[when?], hundreds of research papers have been published leading to a wide spectrum of mathematical relativity, gravitational wave, and astrophysical results for the orbiting black hole problem. This technique extended to astrophysical binary systems involving neutron stars and black holes,[38] and multiple black holes.[39] One of the most surprising predictions is that the merger of two black holes can give the remnant hole a speed of up to 4000 km/s that can allow it to escape from any known galaxy.[40][41] The simulations also predict an enormous release of gravitational energy in this merger process, amounting up to 8% of its total rest mass.[42]
^Arnowitt, R.; Deser, S.; Misner, C. W. (1962). "The dynamics of general relativity". In Witten, L. (ed.). Gravitation: An Introduction to Current Research. New York: Wiley. pp. 227–265.
^Choptuik, M. W. (1989). "Experiences with an adaptive mesh refinement algorithm in numerical relativity". In Evans, C.; Finn, L.; Hobill, D. (eds.). Frontiers in numerical relativity. Cambridge: Cambridge University Press. ISBN0521366666.
Kodi (alias Kudi) adalah suatu kelompok etnis atau suku bangsa Indonesia yang berasal dari daerah Sumba Barat di Provinsi Nusa Tenggara Timur, Indonesia.[1] Beberapa gelar bangsawan Suku Kodi memiliki akar dari pengaruh Pulau Jawa. Seperti raja Kodi pertama bernama Loghe Kanduyo, yang memiliki nama Rato Loghe Kanduyo. Ia memiliki gelar Hangandi (Sang Aji) dan memiliki mahkota Hanggul/Henggul (Sang Kulah). Beberapa pengaruh lain diyakini berupa banyaknya pohon Maja yang berasal dari lu...
Die Liste der Kulturdenkmale in der Leipziger Vorstadt enthält die Kulturdenkmale des Stadtteils Leipziger Vorstadt in der Dresdner Gemarkung Neustadt. Diese Gemarkung gliedert sich in die Stadtteile Innere Neustadt, Äußere Neustadt, Leipziger Vorstadt, Radeberger Vorstadt und Albertstadt. Zur Leipziger Vorstadt gehört auch die vorstädtische Siedlung Neudorf und das Quartier Scheunenhofviertel. Die Anmerkungen sind zu beachten. Diese Liste ist eine Teilliste der Liste der Kulturdenkmale ...
منتخب كندا لكرة القدم للسيدات منتخب كندا لكرة القدم للسيدات بلد الرياضة كندا الفئة كرة القدم للسيدات رمز الفيفا CAN كونفدرالية كونكاكاف (North America, Central America and the Caribbean) الموقع الرسمي الموقع الرسمي، والموقع الرسمي المدرب جون هردمان (2018–2020) القائد كرستين سينكل
Kleines Wappen Schwedens Die Geschichte Schwedens umfasst die Entwicklungen auf dem Gebiet des Königreiches Schweden von der Urgeschichte bis zur Gegenwart. Sie lässt sich bis 11.000 v. Chr. zurückführen, als das Gebiet des heutigen Schwedens nach der letzten Eiszeit erstmals von Menschen besiedelt wurde. Während der Völkerwanderungszeit und der sich anschließenden Vendelzeit (550–800) wurden die Menschen in dem Raum sesshaft. Im Zuge der Wikingerzeit von 800 bis 1050 gingen von den ...
Копенгагенський університет Наука у Данії почала розвиватися в XV столітті. У 1479 році був заснований Копенгагенський університет, один з найстаріших університетів в Північній Європі. Астроном Тихо Браге заснував обсерваторію Ураніборu, і його спостереження використав Ке
Volkswagen Typ 82 KübelwagenDescrizioneTipoveicolo da trasporto leggero ProgettistaFerdinand Porsche Costruttore Volkswagen Data impostazione1938 Data primo collaudo1938 Data entrata in servizio1940 Utilizzatore principale Wehrmacht Costo unitario2495 RM (successivamente 3457 RM)[1] Sviluppato dalKdF-Wagen Altre variantiVolkswagen Schwimmwagen Propulsione e tecnicaMotoreVolkswagen 4 cilindri contrapposti Potenza24 CV[2] Trazioneposteriore 4x2 Armamento e corazzaturaAllwo...
Pelataran parkir serong di Selangor, Malaysia. Parkir serong merupakan cara parkir kendaraan yang membentuk sudut dengan pinggir jalan, tempat parkir. Parkir serong biasanya diterapkan untuk parkir pinggir jalan, atau dipelataran parkir yang dimaksudkan untuk mengoptimalkan luasan pelataran parkir karena dibutuhkan gang yang lebih sempit sehingga dapat menempatkan ruang parkir yang lebih banyak dalam satu satuan luas tertentu. Desain parkir serong Cara parkir serong di pelataran parkir Aspek ...
Tngai Abu adalah sebuah desa yang berada di wilayah Kecamatan Air Hangat Timur, Kabupaten Kerinci, Jambi, Indonesia. Sungai Abu di tinggali oleh kelompok masyarakat asli Kerinci yang Sudah lama menempati daerah ini, dan sebelum menjadi Sungai Abu masyarakat disini terbagi dalam dua kelompok yaitu Sitinggai dan Silamo, dan Depati Tanah Kampung menyatukan kelompok menjadi satu. Sungai Abu memiliki dua ketua adat yaitu Rio Jayo Gedang dan Mangku Mudo Tiang Agamo. Dahulu Jika masyarakat yang di w...
Lake in Turkey Lake BeyşehirSatellite image of Lake Beyşehir in 2019Lake BeyşehirCoordinates37°47′0″N 31°33′0″E / 37.78333°N 31.55000°E / 37.78333; 31.55000Basin countriesTurkeyMax. length45 km (28 mi)Max. width20 km (12 mi)Surface area650.00 km2 (250.97 sq mi)Surface elevation1,123 m (3,684 ft) Lake Beyşehir (Turkish: Beyşehir Gölü; anciently, Carallis or Karallis (Ancient Greek: Κάραλλις), o...
إسبانيا الفرانكوية المدة؟ إسبانيا الفرانكويةعلم مملكة اسبانيا إسبانيا الفرانكويةشعار إسبانيا عاصمة مدريدشلمنقة نظام الحكم غير محدّد نظام الحكم ملكية دستورية اللغة الرسمية الإسبانية الانتماءات والعضوية الأمم المتحدة التاريخ التأسيس 1 أبريل 1939...
1928 film by Scott Pembroke Gypsy of the NorthDirected byScott PembrokeWritten byArthur HoerlBased onstory by Howard Emmett RogersProduced byTrem CarrW. Ray JohnstonStarringGeorgia HaleCinematographyHap DepewEdited byCharles A. PostDistributed byRayart PicturesRelease dateMarch or April 1928Running time60 minutesCountryUnited StatesLanguageSilent..English titles Gypsy of the North is a 1928 silent film drama directed by Scott Pembroke and starring Georgia Hale. It was produced by Trem Carr Pr...
2009 film by Ben Ramsey For the novel by Ian Cameron Esslemont, see Blood and Bone (novel). This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources.Find sources: Blood and Bone – news ·...
Beijing Subway station For the station in Hangzhou, see Dongxinyuan station. Dongxiayuan[1]东夏园PlatformGeneral informationLocationEast Yunhe Street (运河东大街)Tongzhou District, BeijingChinaCoordinates39°54′10″N 116°44′10″E / 39.9029°N 116.7362°E / 39.9029; 116.7362Operated byBeijing Mass Transit Railway Operation Corporation LimitedLine(s) Line 6Platforms2 (1 island platform)Tracks2ConstructionStructure typeU...
Artikel utama: Pandemi koronavirus di Jawa Timur dan Pandemi koronavirus di Indonesia Artikel ini mendokumentasikan suatu wabah penyakit terkini. Informasi mengenai hal itu dapat berubah dengan cepat jika informasi lebih lanjut tersedia; laporan berita dan sumber-sumber primer lainnya mungkin tidak bisa diandalkan. Pembaruan terakhir untuk artikel ini mungkin tidak mencerminkan informasi terkini mengenai wabah penyakit ini untuk semua bidang. Artikel ini memberikan informasi dasar tentang top...
Mexican singer-songwriter, actress You can help expand this article with text translated from the corresponding article in Spanish. (September 2023) Click [show] for important translation instructions. Machine translation, like DeepL or Google Translate, is a useful starting point for translations, but translators must revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia. Consider addin...
Manuscript of Salman Savaji's divan, copy created in Safavid Iran, dated 16th century with later additions Salman Savaji (died 1376) was a Persian[1] poet, who served as a court poet of the Jalayirids.[2] He was born in 1309/10 in the town of Savah, located in Persian Iraq (Irāq-i Ajam), a region corresponding to the western part of Iran.[3] He belonged to a family of accountants, who had served the viziers of the Ilkhanate. His father served under the vizier Sa'd al-...
Not to be confused with Camden Town. London borough in United KingdomLondon Borough of CamdenLondon boroughFrom the top left;Top: Camden Lock railway bridge; St PancrasMiddle: BT Tower; the British MuseumBottom: Granary Square; Kenwood House Coat of armsCouncil logoMotto(s): Non sibi, sed toti(Not for self, but for all)Camden shown within Greater LondonSovereign stateUnited KingdomConstituent countryEnglandRegionLondonCeremonial countyGreater LondonCreated1 April 1965Admin HQ5 Pancras Sq...
Wiremu Te WheoroMPPersonal detailsBorn1826Waikato, New ZealandDied1895New ZealandOccupationPolitician Wiremu Te Morehu Maipapa Te Wheoro (1826–1895), also known as Major Te Wheoro and later as Wiremu Te Morehu or William Morris, was a 19th-century Māori member of the House of Representatives. Te Wheoro was born in the Waikato. His father was Te Kanawa, a chief of the Ngāti Mahuta and Ngāti Naho iwi.[1] He was a strong supporter of Pakeha economic concepts and institutions; at a g...