Manganese dioxide

Manganese dioxide

Names
IUPAC names Manganese dioxide Manganese(IV) oxide
Other names Pyrolusite, hyperoxide of manganese, black oxide of manganese, manganic oxide
Identifiers
CAS Number	1313-13-9^Y
3D model (JSmol)	Interactive image
ChEBI	CHEBI:136511^N
ChemSpider	14117^Y
ECHA InfoCard	100.013.821
EC Number	215-202-6
PubChem CID	14801
RTECS number	OP0350000
UNII	TF219GU161^Y
CompTox Dashboard (EPA)	DTXSID501314019 DTXSID6042109, DTXSID501314019
InChI InChI=1S/Mn.2O^Y Key: NUJOXMJBOLGQSY-UHFFFAOYSA-N^Y
SMILES O=[Mn]=O
Properties
Chemical formula	MnO 2
Molar mass	86.9368 g/mol
Appearance	Brown-black solid
Density	5.026 g/cm^3
Melting point	535 °C (995 °F; 808 K) (decomposes)
Solubility in water	Insoluble
Magnetic susceptibility (χ)	+2280.0×10^−6 cm^3/mol[1]
Structure[2]
Crystal structure	Tetragonal, tP6, No. 136
Space group	P42/mnm
Lattice constant	a = 0.44008 nm, b = 0.44008 nm, c = 0.28745 nm
Formula units (Z)	2
Thermochemistry[3]
Heat capacity (C)	54.1 J·mol^−1·K^−1
Std molar entropy (S^⦵298)	53.1 J·mol^−1·K^−1
Std enthalpy of formation (ΔfH^⦵298)	−520.0 kJ·mol^−1
Gibbs free energy (ΔfG^⦵)	−465.1 kJ·mol^−1
Hazards
GHS labelling:
Pictograms
Signal word	Warning
Hazard statements	H302, H332
Precautionary statements	P261, P264, P270, P271, P301+P312, P304+P312, P304+P340, P312, P330, P501
NFPA 704 (fire diamond)	2 1 2 OX
Flash point	535 °C (995 °F; 808 K)
Safety data sheet (SDS)	ICSC 0175
Related compounds
Other anions	Manganese disulfide
Other cations	Technetium dioxide Rhenium dioxide
Related manganese oxides	Manganese(II) oxide Manganese(II,III) oxide Manganese(III) oxide Manganese heptoxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is ^YN ?) Infobox references

Manganese dioxide is the inorganic compound with the formula MnO
₂. This blackish or brown solid occurs naturally as the mineral pyrolusite, which is the main ore of manganese and a component of manganese nodules. The principal use for MnO
₂ is for dry-cell batteries, such as the alkaline battery and the zinc–carbon battery.^[4] MnO
₂ is also used as a pigment and as a precursor to other manganese compounds, such as KMnO
₄. It is used as a reagent in organic synthesis, for example, for the oxidation of allylic alcohols. MnO
₂ has an α-polymorph that can incorporate a variety of atoms (as well as water molecules) in the "tunnels" or "channels" between the manganese oxide octahedra. There is considerable interest in α-MnO
₂ as a possible cathode for lithium-ion batteries.^[5][6]

Structure

Several polymorphs of MnO
₂ are claimed, as well as a hydrated form. Like many other dioxides, MnO
₂ crystallizes in the rutile crystal structure (this polymorph is called pyrolusite or β-MnO
₂), with three-coordinate oxide anions and octahedral metal centres.^[4] MnO
₂ is characteristically nonstoichiometric, being deficient in oxygen. The complicated solid-state chemistry of this material is relevant to the lore of "freshly prepared" MnO
₂ in organic synthesis.^[7] The α-polymorph of MnO
₂ has a very open structure with "channels", which can accommodate metal ions such as silver or barium. α-MnO
₂ is often called hollandite, after a closely related mineral.

Production

Naturally occurring manganese dioxide contains impurities and a considerable amount of manganese(III) oxide. Production of batteries and ferrite (two of the primary uses of manganese dioxide) requires high purity manganese dioxide. Batteries require "electrolytic manganese dioxide" while ferrites require "chemical manganese dioxide".^[8]

Chemical manganese dioxide

One method starts with natural manganese dioxide and converts it using dinitrogen tetroxide and water to a manganese(II) nitrate solution. Evaporation of the water leaves the crystalline nitrate salt. At temperatures of 400 °C, the salt decomposes, releasing N
₂O
₄ and leaving a residue of purified manganese dioxide.^[8] These two steps can be summarized as:

MnO
₂ + N
₂O
₄ ⇌ Mn(NO
₃)
₂

In another process, manganese dioxide is carbothermically reduced to manganese(II) oxide which is dissolved in sulfuric acid. The filtered solution is treated with ammonium carbonate to precipitate MnCO
₃. The carbonate is calcined in air to give a mixture of manganese(II) and manganese(IV) oxides. To complete the process, a suspension of this material in sulfuric acid is treated with sodium chlorate. Chloric acid, which forms in situ, converts any Mn(III) and Mn(II) oxides to the dioxide, releasing chlorine as a by-product.^[8]

Lastly, the action of potassium permanganate over manganese sulfate crystals produces the desired oxide.^[9]

2 KMnO
₄ + 3 MnSO
₄ + 2 H
₂O→ 5 MnO
₂ + K
₂SO
₄ + 2 H
₂SO
₄

Electrolytic manganese dioxide

Electrolytic manganese dioxide (EMD) is used in zinc–carbon batteries together with zinc chloride and ammonium chloride. EMD is commonly used in zinc manganese dioxide rechargeable alkaline (Zn RAM) cells also. For these applications, purity is extremely important. EMD is produced in a similar fashion as electrolytic tough pitch (ETP) copper: The manganese dioxide is dissolved in sulfuric acid (sometimes mixed with manganese sulfate) and subjected to a current between two electrodes. The MnO₂ dissolves, enters solution as the sulfate, and is deposited on the anode.^[10]

Reactions

The important reactions of MnO
₂ are associated with its redox, both oxidation and reduction.

Reduction

MnO
₂ is the principal precursor to ferromanganese and related alloys, which are widely used in the steel industry. The conversions involve carbothermal reduction using coke:^[11]

MnO
₂ + 2 C → Mn + 2 CO

The key redox reactions of MnO
₂ in batteries is the one-electron reduction:

MnO
₂ + e⁻ + H⁺
→ MnO(OH)

MnO
₂ catalyses several reactions that form O
₂. In a classical laboratory demonstration, heating a mixture of potassium chlorate and manganese dioxide produces oxygen gas. Manganese dioxide also catalyses the decomposition of hydrogen peroxide to oxygen and water:

2 H
₂O
₂ → 2 H
₂O + O
₂

Manganese dioxide decomposes above about 530 °C to manganese(III) oxide and oxygen. At temperatures close to 1000 °C, the mixed-valence compound Mn
₃O
₄ forms. Higher temperatures give MnO, which is reduced only with difficulty.^[11]

Hot concentrated sulfuric acid reduces MnO
₂ to manganese(II) sulfate:^[4]

2 MnO
₂ + 2 H
₂SO
₄ → 2 MnSO
₄ + O
₂ + 2 H
₂O

The reaction of hydrogen chloride with MnO
₂ was used by Carl Wilhelm Scheele in the original isolation of chlorine gas in 1774:

MnO
₂ + 4 HCl → MnCl
₂ + Cl
₂ + 2 H
₂O

As a source of hydrogen chloride, Scheele treated sodium chloride with concentrated sulfuric acid.^[4]

E^o (MnO
₂(s) + 4 H⁺
+ 2 e⁻ ⇌ Mn²⁺ + 2 H
₂O) = +1.23 V

E^o (Cl
₂(g) + 2 e⁻ ⇌ 2 Cl⁻) = +1.36 V

The reaction would not be expected to proceed, based on the standard electrode potentials, but is favoured by the extremely high acidity and the evolution (and removal) of gaseous chlorine.

This reaction is also a convenient way to remove the manganese dioxide precipitate from the ground glass joints after running a reaction (for example, an oxidation with potassium permanganate).

Oxidation

Heating a mixture of KOH and MnO
₂ in air gives green potassium manganate:

2 MnO
₂ + 4 KOH + O
₂ → 2 K
₂MnO
₄ + 2 H
₂O

Potassium manganate is the precursor to potassium permanganate, a common oxidant.

Occurrence and applications

The predominant application of MnO
₂ is as a component of dry cell batteries: alkaline batteries and so called Leclanché cell, or zinc–carbon batteries. Approximately 500,000 tonnes are consumed for this application annually.^[12] Other industrial applications include the use of MnO
₂ as an inorganic pigment in ceramics and in glassmaking. It is also used in water treatment applications.^[13]

Prehistory

Excavations at the Pech-de-l'Azé cave site in southwestern France have yielded blocks of manganese dioxide writing tools, which date back 50,000 years and have been attributed to Neanderthals . Scientists have conjectured that Neanderthals used this mineral for body decoration, but there are many other readily available minerals that are more suitable for that purpose. Heyes et al. (in 2016) determined that the manganese dioxide lowers the combustion temperatures for wood from above 350°C (662°F) to 250°C (482°F), making fire making much easier and this is likely to be the purpose of the blocks.^[14]

Organic synthesis

A specialized use of manganese dioxide is as oxidant in organic synthesis.^[7] The effectiveness of the reagent depends on the method of preparation, a problem that is typical for other heterogeneous reagents where surface area, among other variables, is a significant factor.^[15] The mineral pyrolusite makes a poor reagent. Usually, however, the reagent is generated in situ by treatment of an aqueous solution KMnO
₄ with a Mn(II) salt, typically the sulfate. MnO
₂ oxidizes allylic alcohols to the corresponding aldehydes or ketones:^[16]

cis-RCH=CHCH
₂OH + MnO
₂ → cis-RCH=CHCHO + MnO + H
₂O

The configuration of the double bond is conserved in the reaction. The corresponding acetylenic alcohols are also suitable substrates, although the resulting propargylic aldehydes can be quite reactive. Benzylic and even unactivated alcohols are also good substrates. 1,2-Diols are cleaved by MnO
₂ to dialdehydes or diketones. Otherwise, the applications of MnO
₂ are numerous, being applicable to many kinds of reactions including amine oxidation, aromatization, oxidative coupling, and thiol oxidation.

Microbiology

In Geobacteraceae sp., MnO₂ functions as an electron acceptor coupled to the oxidation of organic compounds. This theme has implications for bioremediation.^[17]

See also

• List of inorganic pigments

References

1. Rumble, p. 4.71
2. Haines, J.; Léger, J.M.; Hoyau, S. (1995). "Second-order rutile-type to CaCl₂-type phase transition in β-MnO₂ at high pressure". Journal of Physics and Chemistry of Solids. 56 (7): 965–973. Bibcode:1995JPCS...56..965H. doi:10.1016/0022-3697(95)00037-2.
3. Rumble, p. 5.25
4. Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. pp. 1218–20. ISBN 978-0-08-022057-4..
5. Barbato, S (31 May 2001). "Hollandite cathodes for lithium ion batteries. 2. Thermodynamic and kinetics studies of lithium insertion into BaMMn₇O₁₆ (M=Mg, Mn, Fe, Ni)". Electrochimica Acta. 46 (18): 2767–2776. doi:10.1016/S0013-4686(01)00506-0. hdl:10533/173039.
6. Tompsett, David A.; Islam, M. Saiful (25 June 2013). "Electrochemistry of Hollandite α-MnO : Li-Ion and Na-Ion Insertion and Li Incorporation". Chemistry of Materials. 25 (12): 2515–2526. CiteSeerX 10.1.1.728.3867. doi:10.1021/cm400864n.
7. Cahiez, G.; Alami, M.; Taylor, R. J. K.; Reid, M.; Foot, J. S. (2004), "Manganese Dioxide", in Paquette, Leo A. (ed.), Encyclopedia of Reagents for Organic Synthesis, New York: J. Wiley & Sons, pp. 1–16, doi:10.1002/047084289X.rm021.pub4, ISBN 9780470842898.
8. Preisler, Eberhard (1980), "Moderne Verfahren der Großchemie: Braunstein", Chemie in unserer Zeit, 14 (5): 137–48, doi:10.1002/ciuz.19800140502.
9. Arthur Sutcliffe (1930) Practical Chemistry for Advanced Students (1949 Ed.), John Murray – London.
10. Biswal, Avijit; Chandra Tripathy, Bankim; Sanjay, Kali; Subbaiah, Tondepu; Minakshi, Manickam (2015). "Electrolytic manganese dioxide (EMD): A perspective on worldwide production, reserves and its role in electrochemistry". RSC Advances. 5 (72): 58255–58283. doi:10.1039/C5RA05892A.
11. Wellbeloved, David B.; Craven, Peter M.; Waudby, John W. (2000). "Manganese and Manganese Alloys". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a16_077. ISBN 3527306730.
12. Reidies, Arno H. (2002), "Manganese Compounds", Ullmann's Encyclopedia of Industrial Chemistry, vol. 20, Weinheim: Wiley-VCH, pp. 495–542, doi:10.1002/14356007.a16_123, ISBN 978-3-527-30385-4
13. Ibrahim, Yazan; Wadi, Vijay S.; Ouda, Mariam; Naddeo, Vincenzo; Banat, Fawzi; Hasan, Shadi W. (15 January 2022). "Highly selective heavy metal ions membranes combining sulfonated polyethersulfone and self-assembled manganese oxide nanosheets on positively functionalized graphene oxide nanosheets". Chemical Engineering Journal. 428: 131267. doi:10.1016/j.cej.2021.131267. ISSN 1385-8947.
14. "Neandertals may have used chemistry to start fires". www.science.org. Retrieved 2022-05-30.
15. Attenburrow, J.; Cameron, A. F. B.; Chapman, J. H.; Evans, R. M.; Hems, B. A.; Jansen, A. B. A.; Walker, T. (1952), "A synthesis of vitamin a from cyclohexanone", J. Chem. Soc.: 1094–1111, doi:10.1039/JR9520001094.
16. Paquette, Leo A. and Heidelbaugh, Todd M. "(4S)-(−)-tert-Butyldimethylsiloxy-2-cyclopen-1-one". Organic Syntheses; Collected Volumes, vol. 9, p. 136. (this procedure illustrates the use of MnO₂ for the oxidation of an allylic alcohol)
17. Lovley, Derek R.; Holmes, Dawn E.; Nevin, Kelly P. (2004). Dissimilatory Fe(III) and Mn(IV) Reduction. Advances in Microbial Physiology. Vol. 49. pp. 219–286. doi:10.1016/S0065-2911(04)49005-5. ISBN 9780120277490. PMID 15518832.

Cited sources

• Rumble, John R., ed. (2018). CRC Handbook of Chemistry and Physics (99th ed.). Boca Raton, Florida: CRC Press. ISBN 978-1-1385-6163-2.

External links

• Index of Organic Synthesis procedures utilizing MnO
  ₂
• Example Reactions with Mn(IV) oxide
• National Pollutant Inventory – Manganese and compounds Fact Sheet
• PubChem summary of MnO
  ₂
• International Chemical Safety Card 0175
• Potters Manganese Toxicity by Elke Blodgett
• The reaction between manganese dioxide and potassium permanganate (1893) by A. J. Hopkins