Laser using electron beam in vacuum as gain medium
A free-electron laser (FEL) is a fourth generation light source producing extremely brilliant and short pulses of radiation. An FEL functions much as a laser but employs relativistic electrons as a gain medium instead of using stimulated emission from atomic or molecular excitations.[1][2] In an FEL, a bunch of electrons passes through a magnetic structure called an undulator or wiggler to generate radiation, which re-interacts with the electrons to make them emit coherently, exponentially increasing its intensity.
The first free-electron laser was developed by John Madey in 1971 at Stanford University[5] using technology developed by Hans Motz and his coworkers, who built an undulator at Stanford in 1953,[6][7] using the wiggler magnetic configuration. Madey used a 43 MeV electron beam[8] and 5 m long wiggler to amplify a signal.
Beam creation
To create an FEL, an electron gun is used. A beam of electrons is generated by a short laser pulse illuminating a photocathode located inside a microwave cavity and accelerated to almost the speed of light in a device called a photoinjector. The beam is further accelerated to a design energy by a particle accelerator, usually a linear particle accelerator. Then the beam passes through a periodic arrangement of magnets with alternating poles across the beam path, which creates a side to side magnetic field. The direction of the beam is called the longitudinal direction, while the direction across the beam path is called transverse. This array of magnets is called an undulator or a wiggler, because the Lorentz force of the field forces the electrons in the beam to wiggle transversely, traveling along a sinusoidal path about the axis of the undulator.
The transverse acceleration of the electrons across this path results in the release of photons, which are monochromatic but still incoherent, because the electromagnetic waves from randomly distributed electrons interfere constructively and destructively in time. The resulting radiation power scales linearly with the number of electrons. Mirrors at each end of the undulator create an optical cavity, causing the radiation to form standing waves, or alternately an external excitation laser is provided.
The radiation becomes sufficiently strong that the transverse electric field of the radiation beam interacts with the transverse electron current created by the sinusoidal wiggling motion, causing some electrons to gain and others to lose energy to the optical field via the ponderomotive force.
This energy modulation evolves into electron density (current) modulations with a period of one optical wavelength. The electrons are thus longitudinally clumped into microbunches, separated by one optical wavelength along the axis. Whereas an undulator alone would cause the electrons to radiate independently (incoherently), the radiation emitted by the bunched electrons is in phase, and the fields add together coherently.
The radiation intensity grows, causing additional microbunching of the electrons, which continue to radiate in phase with each other.[9] This process continues until the electrons are completely microbunched and the radiation reaches a saturated power several orders of magnitude higher than that of the undulator radiation.
The wavelength of the radiation emitted can be readily tuned by adjusting the energy of the electron beam or the magnetic-field strength of the undulators.
FELs are relativistic machines. The wavelength of the emitted radiation, , is given by[10]
or when the wiggler strength parameter K, discussed below, is small
where is the undulator wavelength (the spatial period of the magnetic field), is the relativistic Lorentz factor and the proportionality constant depends on the undulator geometry and is of the order of 1.
This formula can be understood as a combination of two relativistic effects. Imagine you are sitting on an electron passing through the undulator. Due to Lorentz contraction the undulator is shortened by a factor and the electron experiences much shorter undulator wavelength . However, the radiation emitted at this wavelength is observed in the laboratory frame of reference and the relativistic Doppler effect brings the second factor to the above formula. In an X-ray FEL the typical undulator wavelength of 1 cm is transformed to X-ray wavelengths on the order of 1 nm by ≈ 2000, i.e. the electrons have to travel with the speed of 0.9999998c.
Wiggler strength parameter K
K, a dimensionless parameter, defines the wiggler strength as the relationship between the length of a period and the radius of bend,[citation needed]
where is the bending radius, is the applied magnetic field, is the electron mass, and is the elementary charge.
Expressed in practical units, the dimensionless undulator parameter is
.
Quantum effects
In most cases, the theory of classical electromagnetism adequately accounts for the behavior of free electron lasers.[11] For sufficiently short wavelengths, quantum effects of electron recoil and shot noise may have to be considered.[12]
Construction
Free-electron lasers require the use of an electron accelerator with its associated shielding, as accelerated electrons can be a radiation hazard if not properly contained. These accelerators are typically powered by klystrons, which require a high-voltage supply. The electron beam must be maintained in a vacuum, which requires the use of numerous vacuum pumps along the beam path. While this equipment is bulky and expensive, free-electron lasers can achieve very high peak powers, and the tunability of FELs makes them highly desirable in many disciplines, including chemistry, structure determination of molecules in biology, medical diagnosis, and nondestructive testing.
The lack of mirror materials that can reflect extreme ultraviolet and x-rays means that X-ray free electron lasers (XFEL) need to work without a resonant cavity. Consequently, in an X-ray FEL (XFEL) the beam is produced by a single pass of radiation through the undulator. This requires that there be enough amplification over a single pass to produce an appropriate beam.
Hence, XFELs use long undulator sections that are tens or hundreds of meters long. This allows XFELs to produce the brightest X-ray pulses of any human-made x-ray source. The intense pulses from the X-ray laser lies in the principle of self-amplified spontaneous emission (SASE), which leads to microbunching. Initially all electrons are distributed evenly and emit only incoherent spontaneous radiation. Through the interaction of this radiation and the electrons' oscillations, they drift into microbunches separated by a distance equal to one radiation wavelength. This interaction drives all electrons to begin emitting coherent radiation. Emitted radiation can reinforce itself perfectly whereby wave crests and wave troughs are optimally superimposed on one another. This results in an exponential increase of emitted radiation power, leading to high beam intensities and laser-like properties.[15]
Examples of facilities operating on the SASE FEL principle include the:
PAL-XFEL (Pohang Accelerator Laboratory X-ray Free-Electron Laser) in Korea
In 2022, an upgrade to Stanford University’s Linac Coherent Light Source (LCLS-II) used temperatures around −271 °C to produce 106 pulses/second of near light-speed electrons, using superconducting niobium cavities.[17]
Seeding and Self-seeding
One problem with SASE FELs is the lack of temporal coherence due to a noisy startup process. To avoid this, one can "seed" an FEL with a laser tuned to the resonance of the FEL. Such a temporally coherent seed can be produced by more conventional means, such as by high harmonic generation (HHG) using an optical laser pulse. This results in coherent amplification of the input signal; in effect, the output laser quality is characterized by the seed. While HHG seeds are available at wavelengths down to the extreme ultraviolet, seeding is not feasible at x-ray wavelengths due to the lack of conventional x-ray lasers.
In late 2010, in Italy, the seeded-FEL source FERMI@Elettra[18] started commissioning, at the Trieste Synchrotron Laboratory. FERMI@Elettra is a single-pass FEL user-facility covering the wavelength range from 100 nm (12 eV) to 10 nm (124 eV), located next to the third-generation synchrotron radiation facility ELETTRA in Trieste, Italy.
In 2001, at Brookhaven national laboratory, a seeding technique called "High-Gain Harmonic-Generation" that works to X-ray wavelength has been developed.[19] The technique, which can be multiple-staged in an FEL to achieve increasingly shorter wavelengths, utilizes a longitudinal shift of the radiation relative to the electron bunch to avoid the reduced beam quality caused by a previous stage. This longitudinal staging along the beam is called "Fresh-Bunch".[20] This technique was demonstrated at x-ray wavelength[21][22] at Trieste Synchrotron Laboratory.
A similar staging approach, named "Fresh-Slice", was demonstrated at the Paul Scherrer Institut, also at X-ray wavelengths. In the Fresh Slice the short X-ray pulse produced at the first stage is moved to a fresh part of the electron bunch by a transverse tilt of the bunch.[23]
In 2012, scientists working on the LCLS found an alternative solution to the seeding limitation for x-ray wavelengths by self-seeding the laser with its own beam after being filtered through a diamond monochromator. The resulting intensity and monochromaticity of the beam were unprecedented and allowed new experiments to be conducted involving manipulating atoms and imaging molecules. Other labs around the world are incorporating the technique into their equipment.[24][25]
Research
Biomedical
Basic research
Researchers have explored X-ray free-electron lasers as an alternative to synchrotron light sources that have been the workhorses of protein crystallography and cell biology.[26]
Exceptionally bright and fast X-rays can image proteins using x-ray crystallography. This technique allows first-time imaging of proteins that do not stack in a way that allows imaging by conventional techniques, 25% of the total number of proteins. Resolutions of 0.8 nm have been achieved with pulse durations of 30 femtoseconds. To get a clear view, a resolution of 0.1–0.3 nm is required. The short pulse durations allow images of X-ray diffraction patterns to be recorded before the molecules are destroyed.[27] The bright, fast X-rays were produced at the Linac Coherent Light Source at SLAC. As of 2014, LCLS was the world's most powerful X-ray FEL.[28]
Due to the increased repetition rates of the next-generation X-ray FEL sources, such as the European XFEL, the expected number of diffraction patterns is also expected to increase by a substantial amount.[29] The increase in the number of diffraction patterns will place a large strain on existing analysis methods. To combat this, several methods have been researched to sort the huge amount of data that typical X-ray FEL experiments will generate.[30][31] While the various methods have been shown to be effective, it is clear that to pave the way towards single-particle X-ray FEL imaging at full repetition rates, several challenges have to be overcome before the next resolution revolution can be achieved.[32][33]
New biomarkers for metabolic diseases: taking advantage of the selectivity and sensitivity when combining infrared ion spectroscopy and mass spectrometry scientists can provide a structural fingerprint of small molecules in biological samples, like blood or urine. This new and unique methodology is generating exciting new possibilities to better understand metabolic diseases and develop novel diagnostic and therapeutic strategies.
Surgery
Research by Glenn Edwards and colleagues at Vanderbilt University's FEL Center in 1994 found that soft tissues including skin, cornea, and brain tissue could be cut, or ablated, using infrared FEL wavelengths around 6.45 micrometres with minimal collateral damage to adjacent tissue.[34][35] This led to surgeries on humans, the first ever using a free-electron laser. Starting in 1999, Copeland and Konrad performed three surgeries in which they resected meningiomabrain tumors.[36] Beginning in 2000, Joos and Mawn performed five surgeries that cut a window in the sheath of the optic nerve, to test the efficacy for optic nerve sheath fenestration.[37] These eight surgeries produced results consistent with the standard of care and with the added benefit of minimal collateral damage. A review of FELs for medical uses is given in the 1st edition of Tunable Laser Applications.[38]
Fat removal
Several small, clinical lasers tunable in the 6 to 7 micrometre range with pulse structure and energy to give minimal collateral damage in soft tissue have been created.[citation needed] At Vanderbilt, there exists a Raman shifted system pumped by an Alexandrite laser.[39]
Rox Anderson proposed the medical application of the free-electron laser in melting fats without harming the overlying skin.[40] At infraredwavelengths, water in tissue was heated by the laser, but at wavelengths corresponding to 915, 1210 and 1720 nm, subsurface lipids were differentially heated more strongly than water. The possible applications of this selective photothermolysis (heating tissues using light) include the selective destruction of sebum lipids to treat acne, as well as targeting other lipids associated with cellulite and body fat as well as fatty plaques that form in arteries which can help treat atherosclerosis and heart disease.[41]
Military
FEL technology is being evaluated by the US Navy as a candidate for an anti-aircraft and anti-missiledirected-energy weapon. The Thomas Jefferson National Accelerator Facility's FEL has demonstrated over 14 kW power output.[42] Compact multi-megawatt class FEL weapons are undergoing research.[43] On June 9, 2009 the Office of Naval Research announced it had awarded Raytheon a contract to develop a 100 kW experimental FEL.[44] On March 18, 2010 Boeing Directed Energy Systems announced the completion of an initial design for U.S. Naval use.[45] A prototype FEL system was demonstrated, with a full-power prototype scheduled by 2018.[46]
FEL prize winners
The FEL prize is given to a person who has contributed significantly to the advancement of the field of free-electron lasers. In addition, it gives the international FEL community the opportunity to recognize its members for their outstanding achievements. The prize winners are announced at the FEL conference, which currently takes place every two years.
2019 Enrico Allaria, Gennady Stupakov, and Alex Lumpkin
2022 Brian McNeil and Ying Wu
2024 Toru Hara, Hitoshi Tanaka, and Takashi Tanaka
Young Scientist FEL Award
The Young Scientist FEL Award (or "Young Investigator FEL Prize") is intended to honor outstanding contributions to FEL science and technology from a person who is less than 37 years of age at the time of the FEL conference.[47]
^Motz, H.; Thon, W.; Whitehurst, R. N. (1953). "Experiments on Radiation by Fast Electron Beams". Journal of Applied Physics. 24 (7): 826. Bibcode:1953JAP....24..826M. doi:10.1063/1.1721389.
^Benson, S.; Madey, J. M. J. (1984). "Quantum fluctuations in XUV free electron lasers". AIP Conference Proceedings. Vol. 118. pp. 173–182. doi:10.1063/1.34633.
^Schöllkopf, Wieland; Gewinner, Sandy; Junkes, Heinz; Paarmann, Alexander; von Helden, Gert; Bluem, Hans P.; Todd, Alan M. M. (201). Biedron, Sandra G (ed.). "The new IR and THz FEL facility at the Fritz Haber Institute in Berlin". Advances in X-ray Free-Electron Lasers Instrumentation III. 9512. International Society for Optics and Photonics: 95121L. Bibcode:2015SPIE.9512E..1LS. doi:10.1117/12.2182284. hdl:11858/00-001M-0000-0027-13DB-1. S2CID55435812.
^Doyuran, A., et al., Characterization of a High-Gain Harmonic-Generation Free- Electron Laser at Saturation. Phys Rev Lett, 2001. 86(26): p. 5902-5905.70.
^I. Ben-Zvi, K.M. Yang and L.H. Yu, The ‘Fresh-Bunch’ Technique in FELs, Nuclear Instruments & Methods in Physics Research A318, 726 (1992)
^S. Di Mitri, et al, Double Stage Seeded FEL with Fresh Bunch Injection Technique at FERMI@ELETTRA, Proceedings of IPAC2013, Shanghai, China, ISBN 978-3-95450-122-9 pp. 1185-1186
^F. Sottocorona, et al.,
Phys. Rev. Accel. Beams 26, 090702 – Published 12 September 2023
^Guanglei Wang et al, Millijoule Femtosecond X-Ray Pulses from an Efficient Fresh-Slice Multistage Free-Electron Laser, Physical Review Letters 132, 035002 (2024)
^Frank, Matthias; Carlson, David B; Hunter, Mark S; Williams, Garth J; Messerschmidt, Marc; Zatsepin, Nadia A; Barty, Anton; Benner, W. Henry; Chu, Kaiqin; Graf, Alexander T; Hau-Riege, Stefan P; Kirian, Richard A; Padeste, Celestino; Pardini, Tommaso; Pedrini, Bill; Segelke, Brent; Seibert, M. Marvin; Spence, John C. H; Tsai, Ching-Ju; Lane, Stephen M; Li, Xiao-Dan; Schertler, Gebhard; Boutet, Sebastien; Coleman, Matthew; Evans, James E (2014). "Super-bright, fast X-ray free-electron lasers can now image single layer of proteins". IUCrJ. 1 (2): 95–100. doi:10.1107/S2052252514001444. PMC4062087. PMID25075325. Retrieved 2014-02-17.
^Glenn S. Edwards et al., Rev. Sci. Instrum. 74 (2003) 3207
^MacKanos, M. A.; Joos, K. M.; Kozub, J. A.; Jansen, E. D. (2005). "Corneal ablation using the pulse stretched free electron laser". In Manns, Fabrice; Soederberg, Per G; Ho, Arthur; Stuck, Bruce E; Belkin, Michael (eds.). Ophthalmic Technologies XV. Vol. 5688. p. 177. doi:10.1117/12.596603. S2CID137024558.
^F. J. Duarte (12 December 2010). "6". Tunable Laser Applications, Second Edition. CRC Press. ISBN978-1-4200-6058-4.
Madey, John M. J. (1971). "Stimulated Emission of Bremsstrahlung in a Periodic Magnetic Field". Journal of Applied Physics. 42 (5): 1906–1913. Bibcode:1971JAP....42.1906M. doi:10.1063/1.1660466.
Madey, John, Stimulated emission of radiation in periodically deflected electron beam, US Patent 38 22 410,1974
Gover, A.; Yariv, A. (1978). "Collective and single-electron interactions of electron beams with electromagnetic waves, and free-electron lasers". Applied Physics. 16 (2): 121–138. Bibcode:1978ApPhy..16..121G. doi:10.1007/bf00930376. S2CID18497302.