PROFILBARU.COM

Specifications
Specifications
Configuration:;
• Whyte	0-6-0T
• UIC	C n2t
Gauge	1,435 mm (4 ft 8+1⁄2 in)
Driver dia.	1,310 mm (4 ft 3+5⁄8 in)
Wheelbase:
• Axle spacing; (Asymmetrical)	1,750 mm (5 ft 8+7⁄8 in); 1,850 mm (6 ft 7⁄8 in);
• Engine	3,600 mm (11 ft 9+3⁄4 in)
Length:;
• Over headstocks	8,140 mm (26 ft 8+1⁄2 in)
• Over buffers	9,160 mm (30 ft 5⁄8 in)
Width	2,910 mm (9 ft 6+5⁄8 in)
Height	4,205 mm (13 ft 9+1⁄2 in)
Axle load	15.1 tonnes (14.9 long tons; 16.6 short tons)
Loco weight	45.3 tonnes (44.6 long tons; 49.9 short tons)
Fuel type	Coal
Fuel capacity	1,500 kg (3,300 lb)
Water cap.	5,000 L (1,100 imp gal; 1,320 US gal)
Firebox:
• Grate area	1.48 m2 (15.9 sq ft)
Boiler:;
• Pitch	2,105 mm (6 ft 10+7⁄8 in)
Boiler pressure	12 kg/cm2 (11.8 bar; 171 psi)
Heating surface	78.22 m2 (842.0 sq ft)
Cylinders	Two, outside
Cylinder size	420 mm × 580 mm (16.54 in × 22.83 in)
Valve gear	Walschaerts

Type and origin
Type and origin
Power type	Steam
Builder	Gio. Ansaldo & C. (24),; Ernesto Breda (150),; Reggiane (30),; Officine Meccaniche (166);
Build date	1906–1922
Total produced	370

FS 835
FS 835
	FS locomotive 835.088 as preserved
Power type
Type and origin
Power type	Steam
Builder	Gio. Ansaldo & C. (24),; Ernesto Breda (150),; Reggiane (30),; Officine Meccaniche (166);
Build date	1906–1922
Total produced	370
Configuration:;
Specifications
Configuration:;
• Whyte	0-6-0T
• UIC	C n2t
Gauge	1,435 mm (4 ft 8+1⁄2 in)
Driver dia.	1,310 mm (4 ft 3+5⁄8 in)
Wheelbase:
• Axle spacing; (Asymmetrical)	1,750 mm (5 ft 8+7⁄8 in); 1,850 mm (6 ft 7⁄8 in);
• Engine	3,600 mm (11 ft 9+3⁄4 in)
Length:;
• Over headstocks	8,140 mm (26 ft 8+1⁄2 in)
• Over buffers	9,160 mm (30 ft 5⁄8 in)
Width	2,910 mm (9 ft 6+5⁄8 in)
Height	4,205 mm (13 ft 9+1⁄2 in)
Axle load	15.1 tonnes (14.9 long tons; 16.6 short tons)
Loco weight	45.3 tonnes (44.6 long tons; 49.9 short tons)
Fuel type	Coal
Fuel capacity	1,500 kg (3,300 lb)
Water cap.	5,000 L (1,100 imp gal; 1,320 US gal)
Firebox:
• Grate area	1.48 m2 (15.9 sq ft)
Boiler:;
• Pitch	2,105 mm (6 ft 10+7⁄8 in)
Boiler pressure	12 kg/cm2 (11.8 bar; 171 psi)
Heating surface	78.22 m2 (842.0 sq ft)
Cylinders	Two, outside
Cylinder size	420 mm × 580 mm (16.54 in × 22.83 in)
Valve gear	Walschaerts
Maximum speed
Performance figures
Maximum speed	55 km/h (34 mph)
Power output	370 PS (272 kW; 365 hp)
Tractive effort	7,680 kgf (75.3 kN; 16,900 lbf)
Operators
Career
Operators	Ferrovie dello Stato
Numbers	8351–8447, 83598–83816; from 1919: 835.001 – 835.370
Withdrawn	1984
Disposition	54 preserved

The Ferrovie dello Stato Italiane (FS; Italian State Railways) Class 835 (Italian: Gruppo 835) is a 0-6-0 T steam locomotive; it was the standard steam shunter of the FS.

Design and construction

The Class 835 was derived from the work of the Turin offices of the Rete Mediterranea, and the previous experiences with the Class 829 and Class 830; especially from the latter, the Class 835 took the boiler, coupled with an engine with enlarged cylinders.^[1]^[2]

The first 97 locomotives, all built by Ernesto Breda until 1908, had only the counter-pressure steam brake; subsequent locomotives all had the air brakes.^[3]^[4]

In all, 370 Class 835 locomotives were built between 1908 and 1922 (with the pause imposed by World War I, by Breda, Ansaldo, Reggiane and Officine Meccaniche, making the class one of the most numerous to circulate on Italian railways.^[5]^[6]

Service

Nicknamed "Cirilla" or "Pierina", the Class 835 locomotives spent their careers on shunting duties throughout all the Italian network; in the 1930s, several of them were loaned to other private railways or to private companies.^[7]

Three of them (the 019, 198 and 220) remained in Yugoslav territory after World War II and were taken over by the Yugoslav Railways with the same running numbers.^[8]^[6]

Between the 1950s and 1960s, the frames, wheels and coupling rods of several Class 835 locomotives were used in building 40 Class E.321 and 20 Class E.322 electric shunting locomotives, and 29 Class D.234 diesel-hydraulic shunters.^[9]^[6]

The Class 835 soldiered on until the end of regular steam services on the FS, with some 30 locomotives being still active in the early 1980s.^[6]

Preservation

54 Class 835 locomotives survived into preservation, as the class was a favourite for the choice of a static exhibit in the waning years of steam. It is also present in the collection of several railway and transportation museums in Italy, among which the Pietrarsa railway museum and the Museo della Scienza e della Tecnologia "Leonardo da Vinci". None is currently operational.^[10]

Notes

^ Cornolò, p. 476
^ Kalla-Bishop (1986), p. 83.
^ Cornolò, p. 477
^ Kalla-Bishop (1986), pp. 83–84.
^ Cornolò, p. 476
^ ^a ^b ^c ^d Kalla-Bishop (1986), p. 84.
^ Cornolò, p. 479
^ Cornolò, p. 480
^ Cornolò, p. 480-1
^ "Vapore - 835". Photorail forum. Retrieved 15 December 2015.

Bibliography

Cornolò, Giovanni (October 2014). "Locomotive a vapore". TuttoTreno (4).
Kalla-Bishop, P. M. (1986). Italian State Railways Steam Locomotives. Abingdon: Tourret Publishing. ISBN 0-905878-03-5.