Three-dimensional (3D) models represent a physical body using a collection of points in 3D space, connected by various geometric entities such as triangles, lines, curved surfaces, etc.[4] Being a collection of data (points and other information), 3D models can be created manually, algorithmically (procedural modeling), or by scanning.[5][6] Their surfaces may be further defined with texture mapping.
The product is called a 3D model, while someone who works with 3D models may be referred to as a 3D artist or a 3D modeler.
A 3D model can also be displayed as a two-dimensional image through a process called 3D rendering or used in a computer simulation of physical phenomena.
3D models may be created automatically or manually. The manual modeling process of preparing geometric data for 3D computer graphics is similar to plastic arts such as sculpting. The 3D model can be physically created using 3D printing devices that form 2D layers of the model with three-dimensional material, one layer at a time. Without a 3D model, a 3D print is not possible.
Three-dimensional model of a spectrograph[8]Rotating 3D video-game model3D selfie models are generated from 2D pictures taken at the Fantasitron 3D photo booth at Madurodam.
3D models are now widely used anywhere in 3D graphics and CAD but their history predates the widespread use of 3D graphics on personal computers.[9]
In the past, many computer games used pre-rendered images of 3D models as sprites before computers could render them in real-time. The designer can then see the model in various directions and views, this can help the designer see if the object is created as intended to compared to their original vision. Seeing the design this way can help the designer or company figure out changes or improvements needed to the product.[10]
Representation
A modern render of the iconic Utah teapot model developed by Martin Newell (1975). The Utah teapot is one of the most common models used in 3D graphics education.
Almost all 3D models can be divided into two categories:
Solid – These models define the volume of the object they represent (like a rock). Solid models are mostly used for engineering and medical simulations, and are usually built with constructive solid geometry
Shell or boundary – These models represent the surface, i.e., the boundary of the object, not its volume (like an infinitesimally thin eggshell). Almost all visual models used in games and film are shell models.
Solid and shell modeling can create functionally identical objects. Differences between them are mostly variations in the way they are created and edited and conventions of use in various fields and differences in types of approximations between the model and reality.
Shell models must be manifold (having no holes or cracks in the shell) to be meaningful as a real object. In a shell model of a cube, the bottom and top surface of the cube must have a uniform thickness with no holes or cracks in the first and last layer printed. Polygonal meshes (and to a lesser extent subdivision surfaces) are by far the most common representation. Level sets are a useful representation for deforming surfaces which undergo many topological changes such as fluids.
The process of transforming representations of objects, such as the middle point coordinate of a sphere and a point on its circumference into a polygon representation of a sphere, is called tessellation. This step is used in polygon-based rendering, where objects are broken down from abstract representations ("primitives") such as spheres, cones etc., to so-called meshes, which are nets of interconnected triangles. Meshes of triangles (instead of e.g., squares) are popular as they have proven to be easy to rasterize (the surface described by each triangle is planar, so the projection is always convex).[11] Polygon representations are not used in all rendering techniques, and in these cases the tessellation step is not included in the transition from abstract representation to rendered scene.
Process
There are three popular ways to represent a model:
Polygonal modeling – Points in 3D space, called vertices, are connected by line segments to form a polygon mesh. The vast majority of 3D models today are built as textured polygonal models, because they are flexible, because computers can render them so quickly. However, polygons are planar and can only approximate curved surfaces using many polygons.
Curve modeling – Surfaces are defined by curves, which are influenced by weighted control points. The curve follows (but does not necessarily interpolate) the points. Increasing the weight for a point pulls the curve closer to that point. Curve types include nonuniform rational B-spline (NURBS), splines, patches, and geometric primitives
Digital sculpting – There are three types of digital sculpting: Displacement, which is the most widely used among applications at this moment, uses a dense model (often generated by subdivision surfaces of a polygon control mesh) and stores new locations for the vertex positions through use of an image map that stores the adjusted locations. Volumetric, loosely based on voxels, has similar capabilities as displacement but does not suffer from polygon stretching when there are not enough polygons in a region to achieve a deformation. Dynamic tessellation, which is similar to voxel, divides the surface using triangulation to maintain a smooth surface and allow finer details. These methods allow for artistic exploration as the model has new topology created over it once the models form and possibly details have been sculpted. The new mesh usually has the original high resolution mesh information transferred into displacement data or normal map data if for a game engine.
A 3D fantasy fish composed of organic surfaces generated using LAI4D.
The modeling stage consists of shaping individual objects that are later used in the scene. There are a number of modeling techniques, including:
Modeling can be performed by means of a dedicated program (e.g., 3D modeling software by Adobe Substance, Blender, Cinema 4D, LightWave, Maya, Modo, 3ds Max) or an application component (Shaper, Lofter in 3ds Max), or some scene description language (as in POV-Ray). In some cases, there is no strict distinction between these phases; in such cases modeling is just part of the scene creation process (this is the case, for example, with Caligari trueSpace and Realsoft 3D).
3D models can also be created using the technique of Photogrammetry with dedicated programs such as RealityCapture, Metashape and 3DF Zephyr. Cleanup and further processing can be performed with applications such as MeshLab, the GigaMesh Software Framework, netfabb or MeshMixer. Photogrammetry creates models using algorithms to interpret the shape and texture of real-world objects and environments based on photographs taken from many angles of the subject.
There are a variety of 3D modeling programs that can be used in the industries of engineering, interior design, film and others. Each 3D modeling software has specific capabilities and can be utilized to fulfill demands for the industry.
G-code
Many programs include export options to form a g-code, applicable to additive or subtractive manufacturing machinery. G-code (computer numerical control) works with automated technology to form a real-world rendition of 3D models. This code is a specific set of instructions to carry out steps of a product's manufacturing.[12]
The first widely available commercial application of human virtual models appeared in 1998 on the Lands' End web site. The human virtual models were created by the company My Virtual Mode Inc. and enabled users to create a model of themselves and try on 3D clothing. There are several modern programs that allow for the creation of virtual human models (Poser being one example).
3D clothing
Dynamic 3D clothing model made in Marvelous Designer
The development of cloth simulation software such as Marvelous Designer, CLO3D and Optitex, has enabled artists and fashion designers to model dynamic 3D clothing on the computer.[13]
Dynamic 3D clothing is used for virtual fashion catalogs, as well as for dressing 3D characters for video games, 3D animation movies, for digital doubles in movies,[14] as a creation tool for digital fashion brands, as well as for making clothes for avatars in virtual worlds such as SecondLife.
Comparison with 2D methods
3D photorealistic effects are often achieved without wire-frame modeling and are sometimes indistinguishable in the final form. Some graphic art software includes filters that can be applied to 2D vector graphics or 2D raster graphics on transparent layers.
Advantages of wireframe 3D modeling over exclusively 2D methods include:
Flexibility, ability to change angles or animate images with quicker rendering of the changes;
Ease of rendering, automatic calculation and rendering photorealistic effects rather than mentally visualizing or estimating;
Accurate photorealism, less chance of human error in misplacing, overdoing, or forgetting to include a visual effect.
Disadvantages compare to 2D photorealistic rendering may include a software learning curve and difficulty achieving certain photorealistic effects. Some photorealistic effects may be achieved with special rendering filters included in the 3D modeling software. For the best of both worlds, some artists use a combination of 3D modeling followed by editing the 2D computer-rendered images from the 3D model.
3D model market
A large market for 3D models (as well as 3D-related content, such as textures, scripts, etc.) exists—either for individual models or large collections. Several online marketplaces for 3D content allow individual artists to sell content that they have created, including TurboSquid, MyMiniFactory, Sketchfab, CGTrader and Cults. Often, the artists' goal is to get additional value out of assets they have previously created for projects. By doing so, artists can earn more money out of their old content and companies can save money by buying pre-made models instead of paying an employee to create one from scratch. These marketplaces typically split the sale between themselves and the artist that created the asset, artists get 40% to 95% of the sales according to the marketplace. In most cases, the artist retains ownership of the 3d model while the customer only buys the right to use and present the model. Some artists sell their products directly in its own stores offering their products at a lower price by not using intermediaries.
The architecture, engineering and construction (AEC) industry is the biggest market for 3D modeling, with an estimated value of $12.13 billion by 2028.[15] This is due to the increasing adoption of 3D modeling in the AEC industry, which helps to improve design accuracy, reduce errors and omissions and facilitate collaboration among project stakeholders.[16][17]
Over the last several years numerous marketplaces specializing in 3D rendering and printing models have emerged. Some of the 3D printing marketplaces are a combination of models sharing sites, with or without a built in e-com capability. Some of those platforms also offer 3D printing services on demand, software for model rendering and dynamic viewing of items.
The term 3D printing or three-dimensional printing is a form of additive manufacturing technology where a three-dimensional object is created from successive layers material.[18] Objects can be created without the need for complex expensive molds or assembly with multiple parts. 3D printing allows ideas to be prototyped and tested without having to go through a production process.[18][19]
3D models can be purchased from online marketplaces and printed by individuals or companies using commercially available 3D printers, enabling the home-production of objects such as spare parts and even medical equipment.[20][21]
Today, 3D modeling is used in various industries like film, animation and gaming, interior design and architecture.[22] They are also used in the medical industry to create interactive representations of anatomy.[23]
The medical industry uses detailed models of organs; these may be created with multiple two-dimensional image slices from an MRI or CT scan. The movie industry uses them as characters and objects for animated and real-life motion pictures. The video game industry uses them as assets for computer and video games.
The science sector uses them as highly detailed models of chemical compounds.[24]
The architecture industry uses 3D models to demonstrate proposed buildings and landscapes in lieu of traditional, physical architectural models. Additionally, the use of Level of Detail (LOD) in 3D models is becoming increasingly important in the AEC industry. LOD is a measure of the level of detail and accuracy included in a 3D model. The LOD levels range from 100 to 500, with LOD 100 representing a conceptual model that shows the basic massing and location of objects, and LOD 500 representing an extremely detailed model that includes information about every aspect of the building, including MEP systems and interior finishes. By using LOD, architects, engineers and General contractor can more effectively communicate design intent and make more informed decisions throughout the construction process.[25][26]
The archaeology community is now creating 3D models of cultural heritage for research and visualization.[27][28]
The engineering community utilizes them as designs of new devices, vehicles and structures as well as a host of other uses.
In recent decades the earth science community has started to construct 3D geological models as a standard practice.
3D models can be the basis for physical devices that are built with 3D printers or CNC machines.
In video game development, 3D modeling is one stage in a longer development process. The source of the geometry for the shape of an object can be:
A designer, industrial engineer or artist using a 3D-CAD system
An existing object, reverse engineered or copied using a 3D shape digitizer or scanner
Mathematical data stored in memory based on a numerical description or calculation of the object.[18]
A wide number of 3D software are also used in constructing digital representation of mechanical models or parts before they are actually manufactured. Using CAD- and CAM-related software, the operator can test the functionality of assemblies of parts.
3D modeling is used in the field of industrial design, wherein products are 3D modeled[29] before representing them to the clients. In media and event industries, 3D modeling is used in stage and set design.[30]
^Latif Kamran, Adam, Anbia, Yusof Yusri, Kadir Aini, Zuhra Abdul.(2021)"A review of G code, STEP, STEP-NC, and open architecture control technologies based embedded CNC systems".The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-021-06741-z
^Yu, D.; Hunter, J. (2014). "X3D Fragment Identifiers—Extending the Open Annotation Model to Support Semantic Annotation of 3D Cultural Heritage Objects over the Web". International Journal of Heritage in the Digital Era. 3 (3): 579–596. doi:10.1260/2047-4970.3.3.579.
External links
Look up modeler in Wiktionary, the free dictionary.
