In continental Europe, the French word centigrade, also known as centesimal minute of arc, was in use for one hundredth of a grade; similarly, the centesimal second of arc was defined as one hundredth of a centesimal arc-minute, analogous to decimal time and the sexagesimalminutes and seconds of arc.[12] The chance of confusion was one reason for the adoption of the term Celsius to replace centigrade as the name of the temperature scale.[13][14]
The unit originated in France in connection with the French Revolution as the grade, along with the metric system, hence it is occasionally referred to as a metric degree. Due to confusion with the existing term grad(e) in some northern European countries (meaning a standard degree, 1/360 of a turn), the name gon was later adopted, first in those regions, and later as the international standard.[which?] In France, it was also called grade nouveau. In German, the unit was formerly also called Neugrad (new degree) (whereas the standard degree was referred to as Altgrad (old degree)), likewise nygrad in Danish, Swedish and Norwegian (also gradian), and nýgráða in Icelandic.
Although attempts at a general introduction were made, the unit was only adopted in some countries, and for specialised areas such as surveying,[15][7][16]mining[17] and geology.[18][19] Today, the degree, 1/360 of a turn, or the mathematically more convenient radian, 1/2π of a turn (used in the SI system of units) is generally used instead.
In the 1970s –1990s, most scientific calculators offered the gon (gradian), as well as radians and degrees, for their trigonometric functions.[23] In the 2010s, some scientific calculators lack support for gradians.[24]
The international standard symbol for this unit is "gon" (see ISO 31-1, Annex B).[needs update] Other symbols used in the past include "gr", "grd", and "g", the last sometimes written as a superscript, similarly to a degree sign: 50g = 45°.
A metric prefix is sometimes used, as in "dgon", "cgon", "mgon", denoting respectively 0.1 gon, 0.01 gon, 0.001 gon.
Centesimal arc-minutes and centesimal arc-seconds were also denoted with superscripts c and cc, respectively.
SI multiples of gon (gon)
Submultiples
Multiples
Value
SI symbol
Name
Value
SI symbol
Name
10−1 gon
dgon
decigon
101 gon
dagon
decagon
10−2 gon
cgon
centigon
102 gon
hgon
hectogon
10−3 gon
mgon
milligon
103 gon
kgon
kilogon
10−6 gon
μgon
microgon
106 gon
Mgon
megagon
10−9 gon
ngon
nanogon
109 gon
Ggon
gigagon
10−12 gon
pgon
picogon
1012 gon
Tgon
teragon
10−15 gon
fgon
femtogon
1015 gon
Pgon
petagon
10−18 gon
agon
attogon
1018 gon
Egon
exagon
10−21 gon
zgon
zeptogon
1021 gon
Zgon
zettagon
10−24 gon
ygon
yoctogon
1024 gon
Ygon
yottagon
10−27 gon
rgon
rontogon
1027 gon
Rgon
ronnagon
10−30 gon
qgon
quectogon
1030 gon
Qgon
quettagon
Advantages and disadvantages
Each quadrant is assigned a range of 100 gon, which eases recognition of the four quadrants, as well as arithmetic involving perpendicular or opposite angles.
0°
=
0 gradians
90°
=
100 gradians
180°
=
200 gradians
270°
=
300 gradians
360°
=
400 gradians
One advantage of this unit is that right angles to a given angle are easily determined. If one is sighting down a compass course of 117 gon, the direction to one's left is 17 gon, to one's right 217 gon, and behind one 317 gon. A disadvantage is that the common angles of 30° and 60° in geometry must be expressed in fractions (as 33+1/3 gon and 66+2/3 gon respectively).
In the 18th century, the metre was defined as the 10-millionth part of a quarter meridian.
Thus, 1 gon corresponds to an arc length along the Earth's surface of approximately 100 kilometres; 1 centigon to 1 kilometre; 10 microgons to 1 metre.[25] (The metre has been redefined with increasing precision since then.)
Relation to the SI system of units
The gradian is not part of the International System of Units (SI). The EU directive on the units of measurement[20]: 9–10 notes that the gradian "does not appear in the lists drawn up by the CGPM, CIPM or BIPM." The most recent, 9th edition of the SI Brochure does not mention the gradian at all.[22] The previous edition mentioned it only in the following footnote:[26]
The gon (or grad, where grad is an alternative name for the gon) is an alternative unit of plane angle to the degree, defined as (π/200) rad. Thus there are 100 gon in a right angle. The potential value of the gon in navigation is that because the distance from the pole to the equator of the Earth is approximately 10000 km, 1 km on the surface of the Earth subtends an angle of one centigon at the centre of the Earth. However the gon is rarely used.
Repeating circle – type of angular measurement instrument, notably used for navigationPages displaying wikidata descriptions as a fallback
Spread (rational trigonometry) – 2005 book reformulating plane geometryPages displaying short descriptions of redirect targets
Steradian – SI derived unit of solid angle (the "square radian")
Notes
^On rare occasions, centesimal refers to the division of the full angle (360°) into hundred parts. One example is the description of the gradations on Georg Ohm's torsion balance in a history of physics book from 1899.[9] The gradations were in one-hundredths of a full revolution.[10][11]
References
^Weisstein, Eric W. "Gradian". mathworld.wolfram.com. Retrieved 2020-08-31.
^Harris, J. W.; Stocker, H. (1998). Handbook of Mathematics and Computational Science. New York: Springer-Verlag. p. 63.
^Frasier, E. Lewis (February 1974), "Improving an imperfect metric system", Bulletin of the Atomic Scientists, 30 (2): 9–44, Bibcode:1974BuAtS..30b...9F, doi:10.1080/00963402.1974.11458078. On p. 42 Frasier argues for using grads instead of radians as a standard unit of angle, but for renaming grads to "radials" instead of renaming the temperature scale.
^Mahaffey, Charles T. (1976), "Metrication problems in the construction codes and standards sector", Final Report National Bureau of Standards, NBS Technical Note 915, U.S. Department of Commerce, National Bureau of Commerce, Institute for Applied Technology, Center for Building Technology, Bibcode:1976nbs..reptU....M, The term "Celsius" was adopted instead of the more familiar "centigrade" because in France the word centigrade has customarily been applied to angles.
^ abGunzburger, Yann; Merrien-Soukatchoff, Véronique; Senfaute, Gloria; Piguet, Jack-Pierre; Guglielmi, Yves (2004). "Field investigations, monitoring and modeling in the identification of rock fall causes". In Lacerda, W.; Ehrlich, Mauricio; Fontoura, S. A. B.; Sayão, A. S. F. (eds.). Landslides: Evaluation & Stabilization/Glissement de Terrain: Evaluation et Stabilisation, Set of 2 Volumes: Proceedings of the Ninth International Symposium on Landslides, June 28 -July 2, 2004 Rio de Janeiro, Brazil. Vol. 1. CRC Press. ISBN978-1-4822-6288-9.
^ abc"Directive 80/181/EEC". 27 May 2009. Archived from the original on 22 May 2020. On the approximation of the laws of the Member States relating to units of measurement and on the repeal of Directive 71/354/EEC.