XMM-Newton, also known as the High Throughput X-ray Spectroscopy Mission and the X-ray Multi-Mirror Mission, is an X-rayspace observatory launched by the European Space Agency in December 1999 on an Ariane 5 rocket. It is the second cornerstone mission of ESA's Horizon 2000 programme. Named after physicist and astronomer Sir Isaac Newton, the spacecraft is tasked with investigating interstellar X-ray sources, performing narrow- and broad-range spectroscopy, and performing the first simultaneous imaging of objects in both X-ray and optical (visible and ultraviolet) wavelengths.[7]
Initially funded for two years, with a ten-year design life, the spacecraft remains in good health and has received repeated mission extensions, most recently in March 2023 and is scheduled to operate until the end of 2026.[5] ESA plans to succeed XMM-Newton with the Advanced Telescope for High Energy Astrophysics (ATHENA), the second large mission in the Cosmic Vision 2015–2025 plan, to be launched in 2035.[8]XMM-Newton is similar to NASA's Chandra X-ray Observatory, also launched in 1999.
As of May 2018, close to 5,600 papers have been published about either XMM-Newton or the scientific results it has returned.[9]
Concept and mission history
The observational scope of XMM-Newton includes the detection of X-ray emissions from astronomical objects, detailed studies of star-forming regions, investigation of the formation and evolution of galaxy clusters, the environment of supermassive black holes and mapping of the mysterious dark matter.[10]
In 1982, even before the launch of XMM-Newton's predecessor EXOSAT in 1983, a proposal was generated for a "multi-mirror" X-ray telescope mission.[11][12] The XMM mission was formally proposed to the ESA Science Programme Committee in 1984 and gained approval from the Agency's Council of Ministers in January 1985.[13] That same year, several working groups were established to determine the feasibility of such a mission,[11] and mission objectives were presented at a workshop in Denmark in June 1985.[12][14] At this workshop, it was proposed that the spacecraft contain 12 low-energy and 7 high-energy X-ray telescopes.[14][15] The spacecraft's overall configuration was developed by February 1987, and drew heavily from lessons learned during the EXOSAT mission;[11] the Telescope Working Group had reduced the number of X-ray telescopes to seven standardised units.[14][15] In June 1988 the European Space Agency approved the mission and issued a call for investigation proposals (an "announcement of opportunity").[11][15] Improvements in technology further reduced the number of X-ray telescopes needed to just three.[15]
In June 1989, the mission's instruments had been selected and work began on spacecraft hardware.[11][15] A project team was formed in January 1993 and based at the European Space Research and Technology Centre (ESTEC) in Noordwijk, Netherlands.[13] Prime contractor Dornier Satellitensysteme (a subsidiary of the former DaimlerChrysler Aerospace) was chosen in October 1994 after the mission was approved into the implementation phase, with development and construction beginning in March 1996 and March 1997, respectively.[13][14] The XMM Survey Science Centre was established at the University of Leicester in 1995.[11][16] The three flight mirror modules for the X-ray telescopes were delivered by Italian subcontractor Media Lario in December 1998,[14] and spacecraft integration and testing was completed in September 1999.[13]
XMM left the ESTEC integration facility on 9 September 1999, taken by road to Katwijk then by the barge Emeli to Rotterdam. On 12 September, the spacecraft left Rotterdam for French Guiana aboard Arianespace's transport ship MN Toucan.[17] The Toucan docked at the French Guianese town of Kourou on 23 September, and was transported to Guiana Space Centre's Ariane 5 Final Assembly Building for final launch preparation.[18]
Launch of XMM took place on 10 December 1999 at 14:32 UTC from the Guiana Space Centre.[19]XMM was lofted into space aboard an Ariane 5 rocket, and placed into a highly elliptical, 40-degree orbit that had a perigee of 838 km (521 mi) and an apogee of 112,473 km (69,887 mi).[2] Forty minutes after being released from the Ariane upper stage, telemetry confirmed to ground stations that the spacecraft's solar arrays had successfully deployed. Engineers waited an additional 22 hours before commanding the on-board propulsion systems to fire a total of five times, which, between 10 and 16 December, changed the orbit to 7,365 × 113,774 km (4,576 × 70,696 mi) with a 38.9-degree inclination. This resulted in the spacecraft making one complete revolution of the Earth approximately every 48 hours.[2][20]
Immediately after launch, XMM began its Launch and Early Orbit phase of operations.[21] On 17 and 18 December 1999, the X-ray modules and Optical Monitor doors were opened, respectively.[22] Instrument activation started on 4 January 2000,[2] and the Instrument Commissioning phase began on 16 January.[23] The Optical Monitor (OM) attained first light on 5 January, the two European Photon Imaging Camera (EPIC) MOS-CCDs followed on 16 January and the EPIC pn-CCD on 22 January, and the Reflection Grating Spectrometers (RGS) saw first light on 2 February.[23] On 3 March, the Calibration and Performance Validation phase began,[2] and routine science operations began on 1 June.[23]
During a press conference on 9 February 2000, ESA presented the first images taken by XMM and announced that a new name had been chosen for the spacecraft. Whereas the program had formally been known as the High Throughput X-ray Spectroscopy Mission, the new name would reflect the nature of the program and the originator of the field of spectroscopy. Explaining the new name of XMM-Newton, Roger Bonnet, ESA's former Director of Science, said, "We have chosen this name because Sir Isaac Newton was the man who invented spectroscopy and XMM is a spectroscopy mission." He noted that because Newton is synonymous with gravity and one of the goals of the satellite was to locate large numbers of black hole candidates, "there was no better choice than XMM-Newton for the name of this mission."[24]
Including all construction, spacecraft launch, and two years of operation, the project was accomplished within a budget of €689 million (1999 conditions).[13][14]
Operation
The spacecraft has the ability to lower the operating temperature of both the EPIC and RGS cameras, a function that was included to counteract the deleterious effects of ionising radiation on the camera pixels. In general, the instruments are cooled to reduce the amount of dark current within the devices. During the night of 3–4 November 2002, RGS-2 was cooled from its initial temperature of −80 °C (−112 °F) down to −113 °C (−171 °F), and a few hours later to −115 °C (−175 °F). After analysing the results, it was determined the optimal temperature for both RGS units would be −110 °C (−166 °F), and during 13–14 November, both RGS-1 and RGS-2 were set to this level. During 6–7 November, the EPIC MOS-CCD detectors were cooled from their initial operating temperature of −100 °C (−148 °F) to a new setting of −120 °C (−184 °F). After these adjustments, both the EPIC and RGS cameras showed dramatic improvements in quality.[25]
On 18 October 2008, XMM-Newton suffered an unexpected communications failure, during which time there was no contact with the spacecraft. While some concern was expressed that the vehicle may have suffered a catastrophic event, photographs taken by amateur astronomers at the Starkenburg Observatory in Germany and at other locations worldwide showed that the spacecraft was intact and appeared on course. A weak signal was finally detected using a 35-metre (115 ft) antenna in New Norcia, Western Australia, and communication with XMM-Newton suggested that the spacecraft's Radio Frequency switch had failed. After troubleshooting a solution, ground controllers used NASA's 34 m (112 ft) antenna at the Goldstone Deep Space Communications Complex to send a command that changed the switch to its last working position. ESA stated in a press release that on 22 October, a ground station at the European Space Astronomy Centre (ESAC) made contact with the satellite, confirming the process had worked and that the satellite was back under control.[26][27][28]
Mission extensions
Because of the spacecraft's good health and the significant returns of data, XMM-Newton has received several mission extensions by ESA's Science Programme Committee. The first extension came during November 2003 and extended operations through March 2008.[29] The second extension was approved in December 2005, extending work through March 2010.[30] A third extension was passed in November 2007, which provided for operations through 2012. As part of the approval, it was noted that the satellite had enough on-board consumables (fuel, power and mechanical health) to theoretically continue operations past 2017.[31] The fourth extension in November 2010 approved operations through 2014.[32] A fifth extension was approved in November 2014 and affirmed in November 2016, continuing operations through 2018.[33][34] A sixth extension was approved in December 2017, continuing operations through the end of 2020.[35] A seventh extension was approved in November 2018, continuing operations through the end of 2022.[36] An eighth extension was approved in March 2023, continuing operations through the end of 2026, with indicative extension up to 2029.[5]
Spacecraft
XMM-Newton is a 10.8-metre (35 ft) long space telescope, and is 16.16 m (53 ft) wide with solar arrays deployed. At launch it weighed 3,764 kilograms (8,298 lb).[2] The spacecraft has three degrees of stabilisation, which allow it to aim at a target with an accuracy of 0.25 to 1 arcseconds. This stabilisation is achieved through the use of the spacecraft's Attitude & Orbit Control Subsystem. These systems also allow the spacecraft to point at different celestial targets, and can turn the craft at a maximum of 90 degrees per hour.[11][24] The instruments on board XMM-Newton are three European Photon Imaging Cameras (EPIC), two Reflection Grating Spectrometers (RGS), and an Optical Monitor.
The spacecraft is roughly cylindrical in shape, and has four major components. At the fore of the spacecraft is the Mirror Support Platform, which supports the X-ray telescope assemblies and grating systems, the Optical Monitor, and two star trackers. Surrounding this component is the Service Module, which carries various spacecraft support systems: computer and electric busses, consumables (such as fuel and coolant), solar arrays, the Telescope Sun Shield, and two S-band antennas. Behind these units is the Telescope Tube, a 6.8-metre (22 ft) long, hollow carbon fibre structure which provides exact spacing between the mirrors and their detection equipment. This section also hosts outgassing equipment on its exterior, which helps remove any contaminants from the interior of the satellite. At the aft end of spacecraft is the Focal Plane Assembly, which supports the Focal Plane Platform (carrying the cameras and spectrometers) and the data-handling, power distribution, and radiator assemblies.[37]
Instruments
European Photon Imaging Cameras
The three European Photon Imaging Cameras (EPIC) are the primary instruments aboard XMM-Newton. The system is composed of two MOS–CCD cameras and a single pn-CCD camera, with a total field of view of 30 arcminutes and an energy sensitivity range between 0.15 and 15 keV (82.7 to 0.83 ångströms). Each camera contains a six-position filter wheel, with three types of X-ray-transparent filters, a fully open and a fully closed position; each also contains a radioactive source used for internal calibration. The cameras can be independently operated in a variety of modes, depending on the image sensitivity and speed needed, as well as the intensity of the target.[38][39][40]
The two MOS-CCD cameras are used to detect low-energy X-rays. Each camera is composed of seven silicon chips (one in the centre and six circling it), with each chip containing a matrix of 600 × 600 pixels, giving the camera a total resolution of about 2.5 megapixels. As discussed above, each camera has a large adjacent radiator which cools the instrument to an operating temperature of −120 °C (−184 °F). They were developed and built by the University of Leicester Space Research Centre and EEV Ltd.[25][38][40]
The pn-CCD camera is used to detect high-energy X-rays, and is composed of a single silicon chip with twelve individual embedded CCDs. Each CCD is 64 × 189 pixels, for a total capacity of 145,000 pixels. At the time of its construction, the pn-CCD camera on XMM-Newton was the largest such device ever made, with a sensitive area of 36 cm2 (5.6 sq in). A radiator cools the camera to −90 °C (−130 °F). This system was made by the Astronomisches Institut Tübingen, the Max Planck Institute for Extraterrestrial Physics, and PNSensor, all of Germany.[38][41][42]
The EPIC system records three types of data about every X-ray that is detected by its CCD cameras. The time that the X-ray arrives allows scientists to develop light curves, which projects the number of X-rays that arrive over time and shows changes in the brightness of the target. Where the X-ray hits the camera allows for a visible image to be developed of the target. The amount of energy carried by the X-ray can also be detected and helps scientists to determine the physical processes occurring at the target, such as its temperature, its chemical make-up, and what the environment is like between the target and the telescope.[43]
Reflection Grating Spectrometers
The Reflection Grating Spectrometers (RGS) are composed of two Focal Plane Cameras and their associated Reflection Grating Arrays. This system is used to build X-ray spectral data and can determine the elements present in the target, as well as the temperature, quantity and other characteristics of those elements. The RGS system operates in the 2.5 to 0.35 keV (5 to 35 ångström) range, which allows detection of carbon, nitrogen, oxygen, neon, magnesium, silicon and iron.[44][45]
The Focal Plane Cameras each consist of nine MOS-CCD devices mounted in a row and following a curve called a Rowland circle. Each CCD contains 384 × 1024 pixels, for a total resolution of more than 3.5 megapixels. The total width and length of the CCD array was dictated by the size of the RGS spectrum and the wavelength range, respectively. Each CCD array is surrounded by a relatively massive wall, providing heat conduction and radiation shielding. Two-stage radiators cool the cameras to an operating temperature of −110 °C (−166 °F). The camera systems were a joint effort between SRON, the Paul Scherrer Institute, and MSSL, with EEV Ltd and Contraves Space providing hardware.[25][44][45][46][47]
The Reflection Grating Arrays are attached to two of the primary telescopes. They allow approximately 50% of the incoming X-rays to pass unperturbed to the EPIC system, while redirecting the other 50% onto the Focal Plane Cameras. Each RGA was designed to contain 182 identical gratings, though a fabrication error left one with only 181. Because the telescope mirrors have already focused the X-rays to converge at the focal point, each grating has the same angle of incidence, and as with the Focal Plane Cameras, each grating array conforms to a Rowland circle. This configuration minimises focal aberrations. Each 10 × 20 cm (4 × 8 in) grating is composed of 1 mm (0.039 in) thick silicon carbide substrate covered with a 2,000-ångström (7.9×10−6 in) gold film, and is supported by five beryllium stiffeners. The gratings contain a large number of grooves, which actually perform the X-ray deflection; each grating contains an average of 646 grooves per millimetre. The RGAs were built by Columbia University.[44][45]
Optical Monitor
The Optical Monitor (OM) is a 30 cm (12 in) Ritchey–Chrétien optical/ultraviolet telescope designed to provide simultaneous observations alongside the spacecraft's X-ray instruments. The OM is sensitive between 170 and 650 nanometres in a 17 × 17 arcminute square field of view co-aligned with the centre of the X-ray telescope's field of view. It has a focal length of 3.8 m (12 ft) and a focal ratio of ƒ/12.7.[48][49]
The instrument is composed of the Telescope Module, containing the optics, detectors, processing equipment, and power supply; and the Digital Electronics Module, containing the instrument control unit and data processing units. Incoming light is directed into one of two fully redundant detector systems. The light passes through an 11-position filter wheel (one opaque to block light, six broad band filters, one white light filter, one magnifier, and two grisms), then through an intensifier which amplifies the light by one million times, then onto the CCD sensor. The CCD is 384 × 288 pixels in size, of which 256 × 256 pixels are used for observations; each pixel is further subsampled into 8 × 8 pixels, resulting in a final product that is 2048 × 2048 in size. The Optical Monitor was built by the Mullard Space Science Laboratory with contributions from organisations in the United States and Belgium.[48][49]
Telescopes
Feeding the EPIC and RGS systems are three telescopes designed specifically to direct X-rays into the spacecraft's primary instruments. The telescope assemblies each have a diameter of 90 cm (35 in), are 250 cm (98 in) in length, and have a base weight of 425 kg (937 lb). The two telescopes with Reflection Grating Arrays weigh an additional 20 kg (44 lb). Components of the telescopes include (from front to rear) the mirror assembly door, entrance and X-ray baffles, mirror module, electron deflector, a Reflection Grating Array in two of the assemblies, and exit baffle.[13][50][51][52]
Each telescope consists of 58 cylindrical, nested Wolter Type-1 mirrors developed by Media Lario of Italy, each 600 mm (24 in) long and ranging in diameter from 306 to 700 mm (12.0 to 27.6 in), producing a total collecting area of 4,425 cm2 (686 sq in) at 1.5 keV and 1,740 cm2 (270 sq in) at 8 keV.[2] The mirrors range from 0.47 mm (0.02 in) thick for the innermost mirror to 1.07 mm (0.04 in) thick for the outermost mirror, and the separation between each mirror ranges from 1.5 to 4 mm (0.06 to 0.16 in) from innermost to outermost.[2] Each mirror was built by vapour-depositing a 250 nm layer of gold reflecting surface onto a highly polished aluminium mandrel, followed by electroforming a monolithic nickel support layer onto the gold. The finished mirrors were glued into the grooves of an Inconel spider, which keeps them aligned to within the five-micron tolerance required to achieve adequate X-ray resolution. The mandrels were manufactured by Carl Zeiss AG, and the electroforming and final assembly were performed by Media Lario with contributions from Kayser-Threde.[53]
Coarse spacecraft orientation and orbit maintenance is provided by two sets of four 20-newton (4.5 lbf) hydrazine thrusters (primary and backup).[2] The hydrazine thrusters were built by DASA-RI of Germany.[56]
The AOCS was upgraded in 2013 with a software patch ('4WD'), to control attitude using the 3 prime reaction wheels plus the 4th, spare wheel, unused since launch, with the aim of saving propellant to extend the spacecraft lifetime.[57][58] In 2019 the fuel was predicted to last until 2030.[59]
Power systems
Primary power for XMM-Newton is provided by two fixed solar arrays. The arrays are composed of six panels measuring 1.81 × 1.94 m (5.9 × 6.4 ft) for a total of 21 m2 (230 sq ft) and a mass of 80 kg (180 lb). At launch, the arrays provided 2,200 W of power, and were expected to provide 1,600 W after ten years of operation. Deployment of each array took four minutes. The arrays were provided by Fokker Space of the Netherlands.[2][60]
When direct sunlight is unavailable, power is provided by two nickel–cadmium batteries providing 24 A·h and weighing 41 kg (90 lb) each. The batteries were provided by SAFT of France.[2][60]
Radiation Monitor System
The cameras are accompanied by the EPIC Radiation Monitor System (ERMS), which measures the radiation environment surrounding the spacecraft; specifically, the ambient proton and electron flux. This provides warning of damaging radiation events to allow for automatic shut-down of the sensitive camera CCDs and associated electronics. The ERMS was built by the Centre d'Etude Spatiale des Rayonnements of France.[13][38][40]
Visual Monitoring Cameras
The Visual Monitoring Cameras (VMC) on the spacecraft were added to monitor the deployment of solar arrays and the sun shield, and have additionally provided images of the thrusters firing and outgassing of the Telescope Tube during early operations. Two VMCs were installed on the Focal Plane Assembly looking forward. The first is FUGA-15, a black and white camera with high dynamic range and 290 × 290 pixel resolution. The second is IRIS-1, a colour camera with a variable exposure time and 400 × 310 pixel resolution. Both cameras measure 6 × 6 × 10 cm (2.4 × 2.4 × 3.9 in) and weight 430 g (15 oz). They use active pixel sensors, a technology that was new at the time of XMM-Newton's development. The cameras were developed by OIC–Delft and IMEC, both of Belgium.[56][61]
Ground systems
XMM-Newton mission control is located at the European Space Operations Centre (ESOC) in Darmstadt, Germany. Two ground stations, located in Perth and Kourou, are used to maintain continuous contact with the spacecraft through most of its orbit. Back-up ground stations are located in Villafranca del Castillo, Santiago, and Dongara. Because XMM-Newton contains no on-board data storage, science data is transmitted to these ground stations in real time.[20]
Data is then forwarded to the European Space Astronomy Centre's Science Operations Centre in Villafranca del Castillo, Spain, where pipeline processing has been performed since March 2012. Data is archived at the ESAC Science Data Centre,[62] and distributed to mirror archives at the Goddard Space Flight Center and the XMM-Newton Survey Science Centre (SSC) at the Institut de Recherche en Astrophysique et Planétologie. Prior to June 2013, the SSC was operated by the University of Leicester, but operations were transferred due to a withdrawal of funding by the United Kingdom.[16][63]
The object SCP 06F6, discovered by the Hubble Space Telescope (HST) in February 2006, was observed by XMM-Newton in early August 2006 and appeared to show an X-ray glow around it[65] two orders of magnitude more luminous than that of supernovae.[66]
In February 2013 it was announced that XMM-Newton along with NuSTAR have for the first time measured the spin rate of a supermassive black hole, by observing the black hole at the core of galaxy NGC 1365. At the same time, it verified the model that explains the distortion of X-rays emitted from a black hole.[69][70]
In February 2014, separate analyses extracted from the spectrum of X-ray emissions observed by XMM-Newton a monochromatic signal around 3.5 keV.[71][72] This signal is coming from different galaxy clusters, and several scenarios of dark matter can justify such a line. For example, a 3.5 keV candidate annihilating into 2 photons,[73] or a 7 keV dark matter particle decaying into photon and neutrino.[74]
In June 2021, one of the largest X-ray surveys using the European Space Agency's XMM-Newton space observatory published initial findings, mapping the growth of 12,000 supermassive black holes at the cores of galaxies and galaxy clusters.[75]
^Kretschmar, Peter (2018). XMM-Newton Overall Mission Status(PDF). XMM-Newton Users' Group Meeting #19. 17–18 May 2018. Villafranca del Castillo, Spain.
^"Science modes of the EPIC cameras". XMM-Newton Users' Handbook. European Space Agency. 20 July 2015. p. 3.3.2. Issue 2.13. Archived from the original on 15 December 2015. Retrieved 6 February 2016.
Launches are separated by dots ( • ), payloads by commas ( , ), multiple names for the same satellite by slashes ( / ). Crewed flights are underlined. Launch failures are marked with the † sign. Payloads deployed from other spacecraft are (enclosed in parentheses).
Сосна і дуб-2Країна УкраїнаРозташування Україна,Волинська область, Шацький районПлоща 0,1 гаЗасновано 1972Оператор „Шацьке УДЛГ”Посилання Сосна і дуб-2 — ботанічна пам'ятка природи місцевого значення. Об'єкт розташований на території Шацького району Волинської обла
1301 Hudson Street The Hoboken Historical Museum, founded in 1986,[1] is located in Hoboken, New Jersey and presents rotating exhibitions and activities related to the history, culture, architecture and historic landmarks of the city. In 2001, the museum moved to 1301 Hudson Street into the last standing building of the former Bethlehem Steel Hoboken Shipyard.[2][3] Through its Hoboken Oral History Project, the museum and the Friends of the Hoboken Public Library have ...
Naval battle of the First Punic War; one of the largest naval battles ever Battle of Cape EcnomusPart of the First Punic WarThe Naval Battle Near Ecnomus (256 BC)Date256 BCLocationOff southern Sicily37°03′00″N 13°54′00″E / 37.0500°N 13.9000°E / 37.0500; 13.9000Result Roman victoryBelligerents Roman Republic CarthageCommanders and leaders Marcus Atilius RegulusLucius Manlius Vulso HamilcarHannoStrength 330 ships140,000 crew and marines 350 ships150,000 crew ...
44e cérémonie des César Logo des César 2019. César du cinéma Organisé par l'Académie des arts et techniques du cinéma Détails Date 22 février 2019 Lieu Salle Pleyel, Paris France Présentateur Kad Merad Diffusé sur Canal+ Site web www.academie-cinema.org Résumé Meilleur film Jusqu'à la garde Meilleur film étranger Une affaire de famille Japon Films les plus nommés Le Grand Bain Jusqu'à la garde (10) Film le plus récompensé Les Frères Sisters Jusqu'à la garde (4) Chr...
This is an archive of past discussions. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page. Archive 160 ← Archive 165 Archive 166 Archive 167 Archive 168 Archive 169 Archive 170 Wikidata weekly summary #516 Here's your quick overview of what has been happening around Wikidata over the last week. Discussions Open request for adminship: Pi admin bot (RfP scheduled to end after 20 April 2022 17:58 UTC)...
UK political controversy This article is part of a series aboutBoris Johnson Political positions Electoral history Public image MP for Uxbridge and South Ruislip MP for Henley Editor of The Spectator Mayor of London Mayoralty 2008 mayoral election London Britannia Airport Santander Cycles New Routemaster 2011 riots 2012 mayoral election London Cable Car 2012 Summer Olympics 2012 Summer Paralympics Garden Bridge European Union referendum Brexit causes Vote Leave EU referendum aftermath 2016 le...
Paul Walsh Informasi pribadiNama lengkap Paul Anthony WalshTanggal lahir 1 Oktober 1962 (umur 61)Tempat lahir Plumstead, InggrisPosisi bermain penyerangKarier senior*Tahun Tim Tampil (Gol)1979–1982 Charlton Athletic 87 (24)1982–1984 Luton Town 80 (24)1984–1988 Liverpool 77 (25)1988–1992 Tottenham Hotspur 128 (19)1991 → Queens Park Rangers (loan) 2 (0)1992–1994 Portsmouth 73 (14)1994–1995 Manchester City 53 (16)1995–1996 Portsmouth 21 (5)Total 521 (127)Tim nasional1982–1...
نكدب لو قلنا ما بنحبش النوع دراما . كوميديا تأليف تامر حبيب إخراج غادة سليم بطولة يسرامصطفى فهمي البلد مصر لغة العمل العربية عدد المواسم 1 عدد الحلقات 30 مدة الحلقة 40 دقيقة القناة قناة دريم 2 بث لأول مرة في 1 رمضان 1434 هـ 10 يوليو 2013 السينما.كوم صفحة العمل تعديل مصدري - تعديل &...
Bupati Manggarai BaratPetahanaEdistasius Endi, S.E.sejak 26 Februari 2021KediamanKantor Bupati Manggarai BaratMasa jabatan5 tahun (definitif)Dibentuk2003Pejabat pertamaDrs. Fidelis PrandaSitus webwww.manggaraibaratkab.go.id Berikut ini adalah daftar Bupati Manggarai Barat sejak pembentukan kabupaten ini pada tahun 2003. No Bupati Mulai Jabatan Akhir Jabatan Prd. Ket. Wakil Bupati - Drs.Wilfridus Fidelis Pranda 1 September 2003 1 September 2004 - [Ket. 1] – Djidon de Haan 18 Okt...
طبقات الغلاف الجوي طبقة التروبوسفير أو المتكور الدوار[1] هي الطبقة الجوية السفلى الملاصقة للأرض،[2] وتدخل فيها كل المرتفعات التي فوق سطح الأرض بما في ذلك أعلى قمم الجبال.[3][4][5] هي الطبقة الأولي من طبقات الجو وأقربها إلى الأرض. ترتفع حوالي 8 كلم عند القطبين
Katedral MostarGereja Katedral Maria, Bunda Gereja di MostarKatedrala Marije Majke Crkve u MostaruKatedral Mostar43°20′20″N 17°47′52″E / 43.33889°N 17.79778°E / 43.33889; 17.79778Koordinat: 43°20′20″N 17°47′52″E / 43.33889°N 17.79778°E / 43.33889; 17.79778LokasiMostarNegara Bosnia dan HerzegovinaDenominasiGereja Katolik RomaSitus webKatedrala MostarArsitekturStatusKatedralDibangun1970anAdministrasiKeuskupanKeuskupan ...
Like Lesser Gods First edition coverAuthorMari TomasiCountryUnited StatesLanguageEnglishGenreFictionPublisherMilwaukee: BrucePublication date1949Pages289OCLC414117 Like Lesser Gods is a 1949 novel by Mari Tomasi about the Italian-American stonecutters of Granitetown (a fictionalized version of Barre, Vermont), and their dedication to the work despite the danger of silicosis. Originally published by Bruce, a small Catholic press, it was republished by the New England Press in 1988 and 1999. St...
Men's Greco-Roman 60 kgat the Games of the XXVIII OlympiadVenueAno Liosia Olympic HallDate25–26 August 2004Competitors22 from 22 nationsMedalists Jung Ji-hyun South Korea Roberto Monzón Cuba Armen Nazaryan Bulgaria← 20002008 → Wrestling at the2004 Summer OlympicsQualificationFreestyleGreco-RomanWomen55 kg55 kg48 kg60 kg60 kg55 kg66 kg66 kg63 kg74 kg74 kg72 kg84 kg84 kg96 kg96 kg120 kg120 kgvte Main article: Wrestling at the 2004 Summer Olym...
1998 studio album by Lil' KekeThe CommissionStudio album by Lil' KekeReleasedMarch 24, 1998Recorded1997–1998StudioJam Down Studio (Houston, TX)GenreHip hopLength59:31LabelJam Down RecordsBreakaway EntertainmentProducerPatrick Lewis (exec.)Vincent Perry (exec.)Sean Solo JemisonDouble DProwlaHarvey LuvLil' Keke chronology Don't Mess wit Texas(1997) The Commission(1998) It Was All a Dream(1999) Singles from The Commission SouthsideReleased: May 27, 1997 Professional ratingsReview score...
Oto-Manguean language subgroup of Mexico MatlatzincaGeographicdistributionState of Mexico, Michoacán, MorelosLinguistic classificationOto-MangueanWestern?Oto-Pame-ChinantecanOto-PameMatlatzincaSubdivisions Matlatzinca Tlahuica/Ocuiltec Glottologmatl1258 1640 text on the language by Fray Diego Basalenque The Matlatzincan languages are a pair of closely related branches of the Oto-Manguean language family in the Oto-Pamean group, spoken in Central Mexico: Tlahuica/Ocuiltec in one and Matlatzin...
Specialized reproductive appendages in arthropods This article is about the modified limbs of arthropods. For the modified fins of fish, see Gonopodium. One of two gonopods of the greenhouse millipede (Oxidus gracilis). Scale bar: 0.2 mm or approximately 1/127 in Gonopods are specialized appendages of various arthropods used in reproduction or egg-laying. In males, they facilitate the transfer of sperm from male to female during mating, and thus are a type of intromittent organ. In crustacean...
French chemist Brigitte BoisselierBrigitte Boisselier in 2011Born (1956-04-03) 3 April 1956 (age 67)Langres, FranceOther namesBrigitte RoehrKnown forRaëlian spokesperson and Clonaid leader Part of a series of articles on theRaëlian movement Founder History Cloning (Clonaid) Doctrines Beliefs and practices Geniocracy Economic humanitarianism vteBrigitte Boisselier (born 1956), also known as Brigitte Roehr, is a French chemist and Raëlian religious leader best known for her cl...
Osmel Sousa Información personalNombre de nacimiento Osmel Adelino Sousa MontillaApodo Zar de la BellezaNacimiento 26 de septiembre de 1945 (78 años)Rodas, CubaNacionalidad Venezolana CubanaEducaciónEducación Academia de Actuación Horacio PetersonInformación profesionalOcupación Diseñador de moda y empresario Años activo desde 1966Empleador VenevisionProgramas El concurso by Osmel Sousa[editar datos en Wikidata] Osmel Adelino Sousa Montilla[1] (Rodas, 26 de sept...
Strategi Solo vs Squad di Free Fire: Cara Menang Mudah!