Springfield Model 1847

Springfield Model 1847
Type	Musketoon
Place of origin	United States
Service history
Used by	United States Confederate States
Wars	American Indian Wars Mexican–American War American Civil War
Production history
Designed	1847
Manufacturer	Springfield Armory
No. built	c. 10,000
Specifications
Mass	7.4 lb (3.4 kg)
Length	41 in (1,000 mm)
Barrel length	26 in (660 mm)
Cartridge	Paper cartridge, musket ball undersized (.65/16,510 mm) to reduce the effects of powder fouling
Caliber	.69 in (17.526 mm)
Action	Percussion lock
Rate of fire	User dependent; usually 2 to 3 rounds every 1 minute
Muzzle velocity	1,000 ft/s (300 m/s) to 1,400 ft/s (430 m/s)
Effective firing range	50–150 yards
Maximum firing range	200 yards
Feed system	Muzzle-loaded
Sights	A front sight cast into the upper barrel band

The Springfield Model 1847 was a percussion lock musketoon produced by the Springfield Armory in the mid-19th century.

History

Muskets were designed for a dual purpose on the battlefield. They could be used as a ranged weapon, and they could also be used as a pike for short range fighting. Because they were used in a manner similar to a pike, muskets had to be long and heavy, which made them impractical for other uses. Because of this, many muskets were produced in a shorter version, often called a carbine or a musketoon. These shorter weapons were often used by naval forces and cavalry.

The Model 1847 carbine was a shortened version of the Springfield Model 1842 standard infantry musket.

Three basic models were produced at Springfield between 1847 and 1859. The total production of all three models is estimated at 10,000 carbines.

The cavalry model was not highly regarded by those mounted troops to whom they were issued. Inspector General Joseph K. Mansfield conducted a tour of the Western outposts in 1853 and reported that the troops made many derogatory comments about their carbines. Dragoons told him that when the weapon was carried by a mounted trooper, the ball would simply roll out of the weapon's barrel. His report also stated that "There is no probable certainty of hitting the object aimed at, and the recoil is too great to be fired with ease." Mansfield concluded that the gun was essentially "a worthless arm," having "no advocates that I am aware of."

The Model 1847 musketoon's inadequacies were largely responsible for Steptoe's loss at the Battle of Pine Creek (along with other poor equipment selections).^[1]

Design and Features

The Model 1847, like the Model 1842 musket that it was based on, had a .69 caliber barrel, and was fired using a percussion lock system. The barrel was much shorter, only 26 inches in length compared to the Model 1842's 42 inch barrel. The Model 1842 had been produced as a smoothbore musket, but many were later rifled. The Model 1847 carbines were also produced as a smoothbore weapon, and a small number of these also were later rifled.

Smoothbore carbines were not sighted. The carbines that were rifled were also fitted with sights.

Like the Model 1842 musket, the Model 1847 carbine used barrel bands to attach the barrel to the stock. The carbine, being much shorter, only required two barrel bands, instead of the three required for the longer Model 1842 musket.

The Model 1847 carbine featured a small lock and chain or metal bale for attaching the ramrod which was especially useful while reloading on horseback.

The total weight of the carbine was approximately 7.4 lbs, and its overall length was 41 inches.

Variants

The Model 1847 Musketoon was produced in three variants, called the Artillery, Cavalry, and Sappers (engineers) models.

See also

• Springfield musket

References

1. Trimble, Will (March 1907). "A Soldier of the Oregon Frontier". The Quarterly of the Oregon Historical Society. 8 (1): 42–50. JSTOR 20609717.

• Troiani, Don; Coates, Earl J.; Kochan, James; Don Troiani's soldiers in America, 1754-1865, Stackpole Books, 1998, ISBN 0-8117-0519-6

External links