Smith & Wesson Model 22

This article is about the revolver. For the semi-automatic pistol, see Smith & Wesson Model 22A.

S&W Model 22
A S&W Model 22 Thunder Ranch Revolver with a Tyler "T" Grip installed
Type	Revolver
Place of origin	United States
Production history
Designed	1917
Manufacturer	Smith & Wesson
Produced	1950 through 2007-^[clarification needed]
Specifications
Mass	2.5 lb (1.1 kg) (Colt) 2.25 lb (1.0 kg) (S&W)
Length	10.8 in (270 mm)
Barrel length	5.5 in (140 mm)
Cartridge	.45 ACP (11.43×23mm), .45 Auto Rim (11.43×23mmR)
Action	double action, solid frame with swing-out cylinder
Muzzle velocity	760 ft/s (231.7 m/s)
Feed system	six-round cylinder, loaded singly or with two three-round half-moon clips
Sights	blade front sight, notched rear sight

The Smith & Wesson Model 22 is a six-shot, double-action, large frame revolver chambered in .45 ACP using moon clips. It is a refined commercial version of the M1917 revolver first issued during World War I.

Additional

Built around Smith & Wesson's large N frame, it was originally sold as the Model 1950 and is normally fitted with a 5½" barrel with no under lug and fixed combat sights. The Models 25 and Model 26 are the "Target" models.^[1] The Model 22 was succeeded by the stainless steel Smith & Wesson Model 625.

The Model 22 was re-introduced as the second limited production Thunder Ranch revolver in 2007. This gun features a 4" match barrel with under lug, fixed sights, cocobolo grips, and an internal lock. The popularity of this revolver led S&W to continue its production in its classic line as the 22-4. It is quite an accurate revolver and has a smoother trigger pull than the original, most likely due to improvements in production. A limited production run of bright nickel-plated, non–Thunder Ranch models were made. Only select firearm dealers were considered to be allowed to sell this particular model. A certain number of Model 22s were made with a case-hardened (case color) finish by Turnbull Restorations. These came in both 4" and (limited) 5½" Barrel lengths. The finish done by Turnbull is a true case-hardened finish and not the chemical wash finish found on firearms by other manufacturers.^[1]

Use of moon clips

The Model 22 was designed to fire .45 ACP pistol cartridges with use with moon clips. It will headspace the .45 ACP cartridge in the chambers without use of moon clips, but since the extractor cannot engage the rimless cartridge, the empty shells must be ejected with a cleaning rod or pencil.^[1] It may also use .45 Auto Rim as they were designed for revolvers chambered in .45 ACP using moon clips.

Gallery

• 
  A .45 ACP S&W Model 22—4 Heritage Series with case-hardened finish.
• 
  A Model 25—2, Target Model of 1955, in .45 ACP.
• 
  Full and half moon clips loaded with .45 ACP and one Truncated Cone .45 Auto Rim cartridge.

References

1. Supica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 168, 190. ISBN 978-0-89689-293-4.