PROFILBARU.COM

Specifications
Specifications
Configuration:;
• Whyte	0-4-4T
• UIC	B2′ n2t
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.	5 ft 6 in (1.676 m)
Trailing dia.	3 ft 7 in (1.092 m)
Length	32 ft 10+3⁄4 in (10.027 m)
Axle load	16 long tons 16 cwt (37,600 lb or 17.1 t)
Adhesive weight	33 long tons 12 cwt (75,300 lb or 34.1 t)
Loco weight	54 long tons 8 cwt (121,900 lb or 55.3 t)
Fuel type	Coal
Fuel capacity	1+1⁄2 to 2+1⁄2 long tons (1.5 to 2.5 t; 1.7 to 2.8 short tons)
Water cap.	1,350 to 1,150 imp gal (6,100 to 5,200 L; 1,620 to 1,380 US gal)
Firebox:
• Grate area	16+2⁄3 sq ft (1.55 m2)
Boiler pressure	160 lbf/in2 (1.10 MPa)
Heating surface:
• Firebox	102+1⁄4 sq ft (9.50 m2)
• Tubes	1,002+1⁄2 sq ft (93.14 m2)
• Total surface	1,104+3⁄4 sq ft (102.63 m2)
Cylinders	Two, inside
Cylinder size	18 in × 26 in (457 mm × 660 mm)

Type and origin
Type and origin
Power type	Steam
Designer	Harry Wainwright
Builder	SECR Ashford Works
Build date	1904–1909, 1915
Total produced	66

SECR H class
SECR H class
	H class 31177 at Tonbridge in 1958
Power type
Type and origin
Power type	Steam
Designer	Harry Wainwright
Builder	SECR Ashford Works
Build date	1904–1909, 1915
Total produced	66
Configuration:;
Specifications
Configuration:;
• Whyte	0-4-4T
• UIC	B2′ n2t
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.	5 ft 6 in (1.676 m)
Trailing dia.	3 ft 7 in (1.092 m)
Length	32 ft 10+3⁄4 in (10.027 m)
Axle load	16 long tons 16 cwt (37,600 lb or 17.1 t)
Adhesive weight	33 long tons 12 cwt (75,300 lb or 34.1 t)
Loco weight	54 long tons 8 cwt (121,900 lb or 55.3 t)
Fuel type	Coal
Fuel capacity	1+1⁄2 to 2+1⁄2 long tons (1.5 to 2.5 t; 1.7 to 2.8 short tons)
Water cap.	1,350 to 1,150 imp gal (6,100 to 5,200 L; 1,620 to 1,380 US gal)
Firebox:
• Grate area	16+2⁄3 sq ft (1.55 m2)
Boiler pressure	160 lbf/in2 (1.10 MPa)
Heating surface:
• Firebox	102+1⁄4 sq ft (9.50 m2)
• Tubes	1,002+1⁄2 sq ft (93.14 m2)
• Total surface	1,104+3⁄4 sq ft (102.63 m2)
Cylinders	Two, inside
Cylinder size	18 in × 26 in (457 mm × 660 mm)
Tractive effort
Performance figures
Tractive effort	17,360 lbf (77.22 kN)
Operators
Career
Operators	South Eastern and Chatham Railway; → Southern Railway; → British Railways;
Class	SECR / SR: H
Power class	BR: 1P
Locale	Southern Region
Withdrawn	1944, 1951–1964
Disposition	One preserved, remainder scrapped

The South Eastern and Chatham Railway (SECR) H Class is a class of 0-4-4T steam locomotive originally designed for suburban passenger work, designed by Harry Wainwright in 1904. Most of the sixty-six members of the class were later equipped for push-pull working for use on rural branch lines.

Background

The two constituent railways of the SECR had both relied on 0-4-4T locomotives for London suburban, and semi-fast train services. The South Eastern Railway (SER) Q class was introduced in 1881, and the London Chatham and Dover Railway (LCDR) R class in 1891. Of these, the R was the most successful design, and was continued in production (in the form of the LCDR R1 class) by Harry Wainwright after the amalgamation of the railways in 1899. However, as traffic continued to increase there was a need for a new powerful 0-4-4T design to take over from the SER Q class. Wainwright therefore based his new design on the R1 class.^[1]

Construction

The first seven locomotives were built by Ashford Works in November and December 1904. The design was soon found to be successful so that sixty-four were built at Ashford between 1904 and 1909. Following Wainwright's retirement Richard Maunsell discovered that sixty-six had been ordered and their components built, but had not been erected earlier. Therefore a further two were erected in 1915.^[2]

The H class boiler design was found to be so successful that it was later used as a standard replacement boiler on the SECR R1 class, LCDR B1 class, LCDR B2 class, LCDR R class, SER O1 class, SECR Q1 class, and SER R1 class.^[2] All 66 locomotives were equipped with vacuum brakes as used on the former SER, but thirteen also had Westinghouse air brakes and were used on the former LCDR lines.^[3]

Use

The majority of the class replaced Q class locomotives on the London suburban services of the SER and remained on these duties until after they entered Southern Railway stock in 1923. They began to be displaced by the electrification of these lines in 1925/6, when they began to be used on stopping trains further afield in the Eastern Section of Southern Railway in Kent. After 1929, they also began to be used on the Central Section (the former lines of the London Brighton and South Coast Railway) in East Sussex), where they replaced withdrawn D3 class locomotives. Between 1941 and 1952, two (and later three) examples were loaned to the Western Section and worked from Nine Elms on local shunting and empty stock. During 1943 and 1944 three examples were also loaned to the London Midland and Scottish Railway at Forfar.^[4]

Two members of the class were withdrawn during the Second World War, but the remaining 64 entered British Railways stock in 1948. Forty five of the survivors were equipped for push-pull train working between 1949 and 1960, and the class was increasingly used on motor-trains on rural branches. With the completion of the Kent electrification scheme between 1959 and 1962, most of the surviving members of the class were withdrawn, except for a few examples working the non-electrified lines between Tunbridge Wells and Three Bridges.^[5]

Table of withdrawals^[6]
Year	Quantity in service at start of year	Quantity withdrawn	Locomotive numbers	Notes
1944	66	2	1264, 1312
1945–50	64	0	–
1951	64	5	31016, 31182, 31532/41/46
1952–53	59	0	–
1954	59	1	31311
1955	58	4	31158, 31309/20, 31531
1956	54	0	–
1957	54	2	31274, 31321
1958	52	1	31184
1959	51	11	31164, 31259/69/79/95, 31327/29, 31503/23/48/54
1960	40	7	31239/65–66, 31310/19, 31520/40
1961	33	18	31161–62/77/93, 31261/76, 31306–07/22/26/28, 31500/12/17/19/50/52–53
1962	15	8	31278, 31305/08/24, 31521/30/33/42
1963	7	4	31005, 31522/43–44
1964	3	3	31263, 31518/51	31263 preserved

Accidents and incidents

On 11 March 1913, locomotive No. 324 was hauling a passenger train that failed to stop at Ramsgate Town station, Kent. It collided with a van and pushed it through the buffers. Ten people were injured. The accident was caused by the failure to connect the brake pipe between the locomotive and its train.^[7]

Preservation

The final member of the class, SECR No. 263 (SR 1263, BR 31263), was withdrawn from Three Bridges on 4 January 1964. It remained in store at the locomotive depot until the following November, when it was purchased by the H-Class Trust and moved to Robertsbridge. Later it was preserved at the South Eastern Steam Centre at Ashford, but in 1975 the Trustees decided that the locomotive would have more scope for running if based on the Bluebell Railway in Sussex. In 2008 ownership was transferred to the Bluebell Railway Trust, which funded an overhaul that started in March 2009.^[8] It returned to service on 28 July 2012.

Models

Hornby announced in 2016 that they would be releasing a model of the H class in 3 liveries. The model was released in 2017.^[9]^[10]

References

^ Bradley 1980, pp. 23–27.
^ ^a ^b Bradley 1980, p. 24.
^ Bradley 1980, p. 23.
^ Bradley 1980, pp. 25–26.
^ Bradley 1980, p. 26.
^ Bradley 1980, p. 27.
^ Earnshaw 1991, p. 15.
^ "South Eastern & Chatham Railway H-class No.263". Bluebell Railway. 7 April 2009. Retrieved 1 August 2012.
^ "Your scale modelling destination | Key Model World". 23 March 2023.
^ "Hornby 'H' | Hornby Magazine". www.hornbymagazine.com. Archived from the original on 28 December 2016.

Bradley, D. L. (1980). The locomotive history of the South Eastern and Chatham Railway. London: Railway Correspondence and Travel Society. ISBN 0-901115-49-5.
Earnshaw, Alan (1991). Trains in Trouble: Vol. 7. Penryn: Atlantic Books. ISBN 0-906899-50-8.
Ian Allan ABC of British Railways Locomotives, winter 1962/3 edition, page 53