Paper bag problem

A cushion filled with stuffing

In geometry, the paper bag problem or teabag problem is to calculate the maximum possible inflated volume of an initially flat sealed rectangular bag which has the same shape as a cushion or pillow, made out of two pieces of material which can bend but not stretch.

According to Anthony C. Robin, an approximate formula for the capacity of a sealed expanded bag is:[1]

where w is the width of the bag (the shorter dimension), h is the height (the longer dimension), and V is the maximum volume. The approximation ignores the crimping round the equator of the bag.

A very rough approximation to the capacity of a bag that is open at one edge is:

[citation needed]

(This latter formula assumes that the corners at the bottom of the bag are linked by a single edge, and that the base of the bag is not a more complex shape such as a lens).[citation needed]

The square teabag

A numerical simulation of an inflated teabag (with crimping smoothed out)

For the special case where the bag is sealed on all edges and is square with unit sides, h = w = 1, the first formula estimates a volume of roughly

or roughly 0.19. According to Andrew Kepert[who?] at the University of Newcastle, Australia, an upper bound for this version of the teabag problem is 0.217+, and he has made a construction that appears to give a volume of 0.2055+.[citation needed]

Robin also found a more complicated formula for the general paper bag,[1][specify] which gives 0.2017, below the bounds given by Kepert (i.e., 0.2055+ ≤ maximum volume ≤ 0.217+).

See also

Notes

References

  • Robin, Anthony C (2004). "Paper Bag Problem". Mathematics Today. June. Institute of Mathematics and its Applications: 104–107. ISSN 1361-2042.
  • Weisstein, Eric W. "Paper Bag". MathWorld. Archived from the original on 2011-06-29.[circular reference]

Strategi Solo vs Squad di Free Fire: Cara Menang Mudah!