From prehistoric times to the present, mining has played a significant role in the existence of the human race. Since the beginning of civilization, people have used stone and ceramics and, later, metals found on or close to the Earth's surface. These were used to manufacture early tools and weapons. For example, high-quality flint found in northern France and southern England were used to set fire and break rock.[1] Flint mines have been found in chalk areas where seams of the stone were followed underground by shafts and galleries. The oldest known mine on the archaeological record is the "Lion Cave" in Eswatini. At this site, which radiocarbon dating indicates to be about 43,000 years old, paleolithic humans mined mineral hematite, which contained iron and was ground to produce the red pigmentochre.[2][3]
The ancient Romans were innovators of mining engineering. They developed large-scale mining methods, such as the use of large volumes of water brought to the minehead by aqueducts for hydraulic mining. The exposed rock was then attacked by fire-setting, where fires were used to heat the rock, which would be quenched with a stream of water. The thermal shock cracked the rock, enabling it to be removed. In some mines, the Romans utilized water-powered machinery such as reverse overshot water-wheels. These were used extensively in the copper mines at Rio Tinto in Spain, where one sequence comprised 16 such wheels arranged in pairs, lifting water about 80 feet (24 m).[4]
Black powder was first used in mining in Banská Štiavnica, Kingdom of Hungary (present-day Slovakia) in 1627.[5] This allowed blasting of rock and earth to loosen and reveal ore veins, which was much faster than fire-setting. The Industrial Revolution saw further advances in mining technologies, including improved explosives and steam-powered pumps, lifts, and drills.
Some mining engineers who have come from other disciplines, primarily from engineering fields (e.g.: mechanical, civil, electrical, geomatics or environmental engineering) or from science fields (e.g.: geology, geophysics, physics, geomatics, earth science, or mathematics), typically completing a graduate degree such as M.Eng, M.S., M.Sc. or M.A.Sc. in mining engineering after graduating from a different quantitativeundergraduate program.
The fundamental subjects of mining engineering study usually include:
In Europe, most programs are integrated (B.S. plus M.S. into one) after the Bologna Process and take five years to complete. In Portugal, the University of Porto offers an M.Eng. in Mining and Geo-Environmental Engineering[12] and in Spain the Technical University of Madrid offers degrees in Mining Engineering with tracks in Mining Technology, Mining Operations, Fuels and Explosives, Metallurgy.[13] In the United Kingdom, The Camborne School of Mines offers a wide choice of BEng and MEng degrees in Mining engineering and other Mining related disciplines. This is done through the University of Exeter.[14] In Romania, the University of Petroșani (formerly known as the Petroşani Institute of Mines, or rarely as the Petroşani Institute of Coal) is the only university that offers a degree in Mining Engineering, Mining Surveying or Underground Mining Constructions, albeit, after the closure of Jiu Valley coal mines, those degrees had fallen out of interest for most high-school graduates.[15]
In South Africa, leading institutions include the University of Pretoria, offering a 4-year Bachelor of Engineering (B.Eng in Mining Engineering) as well as post-graduate studies in various specialty fields such as rock engineering and numerical modelling, explosives engineering, ventilation engineering, underground mining methods and mine design;[16] and the University of the Witwatersrand offering a 4-year Bachelor of Science in Engineering (B.Sc.(Eng.)) in Mining Engineering[17] as well as graduate programs (M.Sc.(Eng.) and Ph.D.) in Mining Engineering.[18]
Some mining engineers go on to pursue Doctorate degree programs such as Doctor of Philosophy (Ph.D., DPhil), Doctor of Engineering (D.Eng., Eng.D.). These programs involve a significant original research component and are usually seen as entry points into academia.
In the Russian Federation, 85 universities across all federal districts are training specialists for the mineral resource sector. 36 universities are training specialists for extracting and processing solid minerals (mining). 49 are training specialists for extracting, primary processing, and transporting liquid and gaseous minerals (oil and gas). 37 are training specialists for geological exploration (applied geology, geological exploration). Among the universities that train specialists for the mineral resource sector, 7 are federal universities, and 13 are national research universities of Russia.[19] Personnel training for the mineral resource sector in Russian universities is currently carried out in the following main specializations of training (specialist's degree): "Applied Geology" with the qualification of mining engineer (5 years of training); "Geological Exploration" with the qualification of mining engineer (5 years of training); "Mining" with the qualification of mining engineer (5.5 years of training); "Physical Processes in Mining or Oil and Gas Production" with the qualification of mining engineer (5.5 years of training); "Oil and Gas Engineering and Technologies" with the qualification of mining engineer (5.5 years of training). Universities develop and implement the main professional educational programs of higher education in the directions and specializations of training by forming their profile (name of the program). For example, within the framework of the specialization "Mining", universities often adhere to the classical names of the programs "Open-pit mining", "Underground mining of mineral deposits", "Surveying", "Mineral enrichment", "Mining machines", "Technological safety and mine rescue", "Mine and underground construction", "Blasting work", "Electrification of the mining industry", etc. In the last ten years, under the influence of various factors, new names of programs have begun to appear, such as: "Mining and geological information systems", "Mining ecology", etc. Thus, universities, using their freedom to form new training programs for specialists, can look to the future and try to foresee new professions of mining engineers. After the specialist's degree, you can immediately enrol in postgraduate school (analogue of Doctorate degree programs, four years of training).[19]
Salary and statistics
Mining salaries are usually determined by the level of skill required, where the position is, and what kind of organization the engineer works for.[citation needed]
Mining engineers in India earn relatively high salaries in comparison to many other professions,[20] with an average salary of $15,250 [relevant?]. However, in comparison to mining engineer salaries in other regions, such as Canada, the United States, Australia, and the United Kingdom, Indian salaries are low. In the United States, there are an estimated 6,150 employed mining engineers, with a mean yearly wage of US$103,710.[21]
As there is considerable capital expenditure required for mining operations, an array of pre-mining activities are normally carried out to assess whether a mining operation would be worthwhile.
Mineral exploration is the process of locating minerals and assessing their concentrations (grade) and quantities (tonnage), to determine if they are commercially viable ores for mining. Mineral exploration is much more intensive, organized, involved, and professional than mineral prospecting – though it frequently utilizes services exploration, enlisting geologists and surveyors in the necessary pre-feasibility study of the possible mining operation. Mineral exploration and estimation of the reserve can determine the profitability conditions and advocate the form and type of mining required.[citation needed]
Mineral discovery
Mineral discovery can be made from research of mineral maps, academic geological reports, or government geological reports. Other sources of information include property assays and local word of mouth. Mineral research usually includes sampling and analysing sediments, soil, and drill cores. Soil sampling and analysis is one of the most popular mineral exploration tools.[22][23] Other common tools include satellite and aerial surveys or airborne geophysics, including magneto-metric and gamma-spectrometric maps.[24] Unless the mineral exploration is done on public property, the owners of the property may play a significant role in the exploration process and might be the original discoverers of the mineral deposit.[25]
Mineral determination
After a prospective mineral is located, the mining geologist and engineer determine the ore properties. This may involve chemical analysis of the ore to determine the sample's composition. Once the mineral properties are identified, the next step is determining the quantity of the ore. This involves determining the extent of the deposit and the purity of the ore.[26] The geologist drills additional core samples to find the limits of the deposit or seam and estimates the quantity of valuable material present.
Once the mineral identification and reserve amount are reasonably determined, the next step is to determine the feasibility of recovering the mineral deposit. A preliminary survey shortly after the discovery of the deposit examines the market conditions, such as the supply and demand of the mineral, the amount of ore needed to be moved to recover a certain quantity of that mineral, and analysis of the cost associated with the operation. This pre-feasibility study determines whether the mining project is likely to be profitable; if so, a more in-depth analysis of the deposit is undertaken. After the full extent of the ore body is known and has been examined by engineers, the feasibility study examines the cost of initial capital investment, methods of extraction, the cost of operation, an estimated length of time to pay back the investment, the gross revenue and net profit margin, any possible resale price of the land, the total life of the reserve, the full value of the account, investment in future projects, and the property owner or owners' contract. In addition, environmental impact, reclamation, possible legal ramifications, and all government permitting are considered.[27][28] These steps of analysis determine whether the mining company and its investors should proceed with the extraction of the minerals or whether the project should be abandoned. The mining company may decide to sell the rights to the reserve to a third party rather than develop it themselves. Alternatively, the decision to proceed with extraction may be postponed indefinitely until market conditions become favourable.
Mining operation
Mining engineers working in an established mine may work as an engineer for operations improvement, further mineral exploration, and operation capitalization by determining where in the mine to add equipment and personnel. The engineer may also work in supervision and management or as an equipment and mineral salesperson. In addition to engineering and operations, the mining engineer may work as an environmental, health, and safety manager or design engineer.
The act of mining requires different methods of extraction depending on the mineralogy, geology, and location of the resources. Characteristics such as mineral hardness, the mineral stratification, and access to that mineral will determine the method of extraction.
Generally, mining is either done from the surface or underground. Mining can also occur with surface and covert operations on the same reserve. Mining activity varies as to what method is employed to remove the mineral.
Surface mining
Surface mining comprises 90% of the world's mineral tonnage output. Also called open pit mining, surface mining removes minerals in formations near the surface. Ore retrieval is done by material removal from the land in its natural state. Surface mining often alters the land's characteristics, shape, topography, and geological makeup.
Surface mining involves quarrying and excavating minerals through cutting, cleaving, and breaking machinery. Explosives are usually used to facilitate breakage. Hard rocks such as limestone, sand, gravel, and slate are generally quarried into benches.
Using mechanical shovels, track dozers, and front-end loaders, strip mining is done on softer minerals such as clays and phosphate removed. Smoother coal seams can also be extracted this way.
With placer mining, dredge mining can also remove minerals from the bottoms of lakes, rivers, streams, and even the ocean. In addition, in-situ mining can be done from the surface using dissolving agents on the ore body and retrieving the ore via pumping. The pumped material is then set to leach for further processing. Hydraulic mining is utilized as water jets to wash away either overburden or the ore itself.[29]
Mining process
Blasting
Explosives are used to break up a rock formation and aid in the collection of ore in a process called blasting. Blasting generally the heat and immense pressure of the detonated explosives to shatter and fracture a rock mass. The type of explosives used in mining is high explosives, which vary in composition and performance properties. The mining engineer is responsible for selecting and properly placing these explosives to maximize efficiency and safety. Blasting occurs in many phases of the mining process, such as the development of infrastructure and the production of the ore. An alternative to high explosives are Cardox blasting cartridges, invented in 1931,[30] and extensively used from 1932 in coal mines. The cartridge contains an 'energizer' which heats liquid carbon dioxide until it ruptures a bursting disk; then, a physical explosion of the supercritical fluid.
Leaching
Leaching is the loss or extraction of certain materials from a carrier into a liquid (usually, but not always, a solvent). Mostly used in rare-earth metal extraction.
Flotation
Flotation (also spelled floatation) involves phenomena related to the relative buoyancy of minerals. It is the most widely used metal separating method.
Electrostatic separation
Separating minerals by electro-characteristic differences.
Gravity separation
Gravity separation is an industrial method of separating two components, either a suspension or dry granular mixture, where separating the components with gravity is sufficiently practical.
Magnetic separation
Magnetic separation is a process in which magnetically susceptible material is extracted from a mixture using a magnetic force.
Hydraulic separation
Hydraulic separation is a process that uses the density difference to separate minerals. Before hydraulic separation, minerals were crushed into uniform sizes; minerals with uniform sizes and densities will have different settling velocities in water, which can be used to separate target minerals.
Legal attention to health and safety in mining began in the late 19th century. In the 20th century, it progressed to a comprehensive and stringent codification of enforcement and mandatory health and safety regulation. In whatever role, a mining engineer must follow all mine safety laws.
The act codified in Code of Federal Regulations § 30 (CFR § 30) covers all miners at an active mine. When a mining engineer works at an active mine, they are subject to the same rights, violations, mandatory health and safety regulations, and compulsory training as any other worker at the mine. The mining engineer can be legally identified as a "miner".[32]
The act establishes the rights of miners. The miner may report at any time a hazardous condition and request an inspection. The miners may elect a miners' representative to participate during an inspection, pre-inspection meeting, and post-inspection conference. The miners and miners' representatives shall be paid for their time during all inspections and investigations.[33]
Waste and uneconomic material generated from the mineral extraction process are the primary source of pollution in the vicinity of mines. Mining activities, by their nature, cause a disturbance of the natural environment in and around which the minerals are located. Mining engineers should therefore be concerned not only with the production and processing of mineral commodities but also with the mitigation of damage to the environment both during and after mining as a result of the change in the mining area.
^Hartman, Howard L. SME Mining Engineering Handbook, Society for Mining, Metallurgy, and Exploration Inc, 1992, p. 3.[ISBN missing]
^"Archaeology - Malolotja Nature Reserve – Ancient Mining". Culture – Archaeology. Eswatini National Trust Commission – Conserving Eswatini's Natural and Cultural Heritage. 2020. Archived from the original on June 27, 2021. Retrieved 2022-09-17.
^Peace Parks Foundation, "Major Features: Cultural Importance." Republic of South Africa: Author. Retrieved Aug. 27, 2007, [1].
^McGill University. Sunset of a Transformational Career. Chapter 16 in: White F. Miner with a Heart of Gold: a biography of a mineral science and engineering educator. Friesen Press, Victoria. 2020. ISBN 978-1-5255-7765-9 (Hardcover) ISBN 978-1-5255-7766-6 (Paperback) ISBN 978-1-5255-7767-3 (eBook)
^Martins-Ferreira, M. A. C., Campos, J. E. G., & Pires, A. C. B. (2017). "Near-mine exploration via soil geochemistry multivariate analysis at the Almas gold province, Central Brazil: A study case." Journal of Geochemical Exploration, 173, 52–63.
^Mann, A. W., Birrell, R. D., Fedikow, M. A. F., & De Souza, H. A. F. (2005). "Vertical ionic migration: mechanisms, soil anomalies, and sampling depth for mineral exploration". Geochemistry: Exploration, Environment, Analysis, 5(3), 201–210.
^Pires, A. C. B., Carmelo, A. C., & Martins-Ferreira, M. A. C. (2019). "Statistical enhancement of airborne gamma-ray uranium anomalies: Minimizing the lithological background contribution in mineral exploration". Journal of Geochemical Exploration, 198, 100–113.
^Peters, William C, SME: Mining Engineering Handbook, 2nd ed., Vol. 1, 1992, "Geologic Prospecting and Exploration," pp. 221–225, ISBN0-87335-100-2
^Gumble, Gordon E, et al. SME: Mining Engineering Handbook, 2nd ed., Vol. 1, C1992, "Sample Preparation and Assaying," pp. 327–332, ISBN0-87335-100-2
^Gentry Donald W., SME: Mining Engineering Handbook, 2nd ed., Volume 1, 1992, "Mine Evaluation and Investment Analysis", pp. 387–389, ISBN0-87335-100-2
^O'Hara, T. Alan and Stanley C. Suboleski, SME: Mining Engineering Handbook, 2nd ed., Vol. 1, 1992, "Costs and Cost Estimation", pp. 405–408, ISBN0-87335-100-2
^Ernest Bohnet, SME: Mining Engineering Handbook, 2nd ed., Volume 2, 1992, "Surface Mining: Comparison of Methods," pp. 1529–1538, ISBN0-87335-100-2
^GB 386688, David Hodge & Cardox (Great Britain) Limited, "Improvements in and relating to means for effecting discharge of explosive charges such as those of blasting cartridges", published 1933-01-13
^The Federal Mine Safety and Health Act of 1977, § 103(f) and (g)(1)
This article incorporates text by Petrov, V. L. available under the CC BY 4.0 license.
Further reading
Eric C. Nystrom, Seeing Underground: Maps, Models, and Mining Engineering in America. Reno, NV: University of Reno Press, 2014. [ISBN missing]
Franklin White. Miner with a Heart of Gold: a biography of a mineral science and engineering educator. Friesen Press, Victoria. 2020. ISBN 978-1-5255-7765-9 (Hardcover) ISBN 978-1-5255-7766-6 (Paperback) ISBN 978-1-5255-7767-3 (eBook)
NXT: The Great American Bash Pôster promocional do evento, apresentando Wes Lee, Tiffany Stratton, Ilja Dragunov, Carmelo Hayes, Dragon Lee e Roxanne Perez. Detalhes Promoção WWE Programa(s) NXT Data 30 de julho de 2023 Local H-E-B Center at Cedar Park Cidade Cedar Park, Texas Cronologia de eventos do WWE Network ← AnteriorMoney in the Bank Próximo →SummerSlam Cronologia do The Great American Bash ← Anterior2022 Próximo →— NXT: The Great American Bash (2...
Ramses V Rameses V Cartouche van farao Ramses V op kalkstenen obelisk Museo Civico Archeologico Farao van de 20e dynastie Periode ca. 1156-1151 v.Chr. Voorganger Ramses IV Opvolger Ramses VI Vader Ramses IV Moeder Tentopet Partner Henutwati Ramses V is de vierde Farao uit de 20e dynastie van Egypte (Nieuwe Rijk) en regeerde (ca.) 1156 - 1151 v.Chr. Hij volgde Ramses IV op en werd opgevolgd door Ramses VI. Ramses V was een zoon van Farao Ramses IV en Tentopet, die beiden een kind waren van Ram...
Wołowy GrzbietVolí chrbát Blick vom Pass Vyšné Kôprovské sedlo Höhe 2377 m n.p.m. Lage Polen, Slowakei Gebirge Hohe Tatra, Karpaten Koordinaten 49° 10′ 48″ N, 20° 4′ 18″ O49.1820.0716666666672377Koordinaten: 49° 10′ 48″ N, 20° 4′ 18″ O Wołowy Grzbiet (Kleinpolen) Blick von Nordosten vom Gipfel Bula pod Rysami Blick von Süden auf das Massiv Der Wołowy Grzbiet (slowakisch Volí chrbát, deutsch ...
Bài viết này cần thêm chú thích nguồn gốc để kiểm chứng thông tin. Mời bạn giúp hoàn thiện bài viết này bằng cách bổ sung chú thích tới các nguồn đáng tin cậy. Các nội dung không có nguồn có thể bị nghi ngờ và xóa bỏ. Tàu khu trục Naganami Khái quát lớp tàuTên gọi Lớp YūgumoXưởng đóng tàu Xưởng Hải quân MaizuruXưởng đóng tàu FujinagataUraga Dock CompanyBên khai thác Hải quân Đế quốc Nh...
Michaelskirche Ottobrunn Blick auf Altar und Gegenempore Die Michaelskirche ist ein evangelisch-lutherisches Kirchengebäude in Ottobrunn, Ganghoferstraße 26. Inhaltsverzeichnis 1 Geschichte 2 Ausstattung 2.1 Orgel 2.2 Glocken 3 Einzelnachweise 4 Weblinks Geschichte Die Michaelskirche wurde nach Plänen des Architekten Theo Steinhauser gebaut und im März 1964 eingeweiht. Der Grundriss des schlichten Baus besitzt die Form eines unregelmäßigen Fünfeckes. Im Inneren führen zwei Gänge...
Public university system in Colorado, US This article is about the public university system in the state of Colorado. For the private institution in Colorado Springs, Colorado, see Colorado College. University of ColoradoOld Main on the Boulder campusTypePublic university systemEstablished1876Endowment$1.53 billion (2020)[1][2]PresidentTodd SalimanLocationBoulder, Colorado, United States BoulderColorado SpringsDenverAnschutzclass=notpageimage| Locations of University of Colora...
Bupati KotabaruPetahanaH. Sayed Jafar Al-Idrus, S.H.sejak 26 April 2021Masa jabatan5 tahunDibentuk1950Pejabat pertamaM. YamaniSitus webkotabarukab.go.id Berikut ini adalah daftar Bupati Kotabaru yang menjabat sejak pembentukannya pada tahun 1950. No Bupati Mulai Jabatan Akhir Jabatan Prd. Ket. Wakil Bupati 1 M. Yamani 1950 1951 1 – 2 Abdul Rasjid 1951 1955 2 3 Ibrahim Sedar 1955 1958 3 4 H.Abdul Muluk 1958 1959 4 5 H. A.Hudari 1960 1963 5 6 Basrindu 1...
يفتقر محتوى هذه المقالة إلى الاستشهاد بمصادر. فضلاً، ساهم في تطوير هذه المقالة من خلال إضافة مصادر موثوق بها. أي معلومات غير موثقة يمكن التشكيك بها وإزالتها. (ديسمبر 2023) اليونانية العامية المختلطة النسب لغات هندية أوروبية لغات هندية أوروبيةلغات هيلينيةالإغريقيةكوينه تعدي...
Pakistani Oil Marketing Company Puma EnergyTypeSubsidiaryIndustryOil and gasFounded2001; 22 years ago (2001)HeadquartersKarachi, PakistanArea servedPakistanProductsPetroleum productsServicesDistribution and retailWebsitewww.pumapakistan.com Puma Energy Pakistan, formerly known as Admore Gas, is a Pakistani oil marketing company which is a subsidiary of Singaporean company Puma Energy and is based in Karachi, Pakistan.[1] It was founded in 2001.[1] The company...
У этого термина существуют и другие значения, см. Нагано (значения). Префектура Нагано長野県 Префектура Нагано на карте Японии Карта префектуры Нагано Расположение Страна Япония Регион Тюбу Остров Хонсю Координаты 36°39′05″ с. ш. 138°10′52″ в. д.HGЯO Информация Админи...
See also: Allied Troop Movements During Operation Michael 1918 German offensive during World War I Operation MichaelPart of the German Spring Offensive in World War IEvolution of the front line during the battleDate21 March – 5 April 1918LocationNorthern FranceResult See Aftermath sectionTerritorialchanges Germans penetrate British lines up to 40 mi (64 km) while seizing 1,200 sq mi (3,100 km2) of territoryBelligerents German Empire British Empire ...
Pour les articles homonymes, voir Delille (homonymie). Tombe de l'abbé DelilleTombe de MontanierPrésentationType TombeauDestination initiale SépultureArchitecte Pierre-François-Nicolas PhilipponConstruction 1813Patrimonialité Inscrit MH (1983)LocalisationPays FranceRégion Île-de-FranceCommune ParisArrondissement 20e arrondissementAdresse cimetière du Père-LachaiseCoordonnées 48° 51′ 38″ N, 2° 23′ 35″ ELocalisation sur la carte ...
Questa voce o sezione sull'argomento centri abitati della Spagna non cita le fonti necessarie o quelle presenti sono insufficienti. Puoi migliorare questa voce aggiungendo citazioni da fonti attendibili secondo le linee guida sull'uso delle fonti. Segui i suggerimenti del progetto di riferimento. Corbillos de los OteroscomuneCorbillos de los Oteros – Veduta LocalizzazioneStato Spagna Comunità autonoma Castiglia e León Provincia León TerritorioCoordinate42°24′N 5°27...
Tuczna Pueblo Coordenadas 51°52′50″N 23°25′24″E / 51.880555555556, 23.423333333333Entidad Pueblo • País PoloniaAltitud • Media 163 m s. n. m.Población (2021) • Total 887 hab.Huso horario UTC+01:00 y UTC+02:00Código postal 21-523[1][editar datos en Wikidata] Iglesia de Santa Ana en Tuczna Tuczna [pronunciación en polaco: /ˈtut͡ʂna/] es un pueblo ubicado en Distrito de Biała Podlaska, Voivodato ...
Imelda May Imelda May no Madgarden Festival 2015, em Madrid. Informação geral Nome completo Imelda Mary Clabby Nascimento 10 de julho de 1974 (49 anos) Origem Dublin País Irlanda Gênero(s) Rockabilly, soft rock Período em atividade 2003 – atualmente Gravadora(s) Decca RecordsAmbassador Records Página oficial www.imeldamay.co.uk Imelda Mary Clabby (nasceu no dia 10 de julho de 1974 em Dublin, Irlanda), mais conhecida como Imelda May, é uma cantora irlandesa, famosa po...
Paghimo ni bot Lsjbot. Alang sa ubang mga dapit sa mao gihapon nga ngalan, tan-awa ang Bog Lake. 49°54′45″N 94°07′47″W / 49.91245°N 94.12986°W / 49.91245; -94.12986 Bog Lake Lanaw Nasod Kanada Lalawigan Ontario Kondado Kenora District Gitas-on 343 m (1,125 ft) Tiganos 49°54′45″N 94°07′47″W / 49.91245°N 94.12986°W / 49.91245; -94.12986 Area 0.41 km2 (0 sq mi) Timezone CST (UTC-6) - summer (DST) CDT ...
