Illinois's state route numbers originated in 1918 as State Bond Issues 1 through 46, used to finance the new roads. The numbers of the bond issues were then used to mark the highway routes along the way. Another series of bond issues were authorized in 1924 (47–185) and again were used to mark the roads they paid for. After that the route numbers evolved into a separate system. The State Bond Issue numbers (SBI) remained as inventory designations on the original routes even after the numbered portion was changed, deleted or rerouted. These SBI numbers remain on IDOT district maps to this day and are used along with other designations for bid requests and other official documents.[2]
During the middle part of the 20th century the state numbered routes expanded to new roads around the state. When the United States Numbered Highway System was introduced in the late 1920s many of the new US Routes were already part of the state system and the US number was just added to signposts. During 1930s as the US Highway System matured, redundant state numbers were often removed from US Routes. During 1950s and into 1980s, as the Interstate Highway System started to supplant many US Routes, redundant numbers were removed or replaced with state numbers. After the original Interstate Highways were substantially completed in the early 1970s many state (and US) routes, especially in the Chicago metro area, were removed or shortened as unnecessary.[2]
While US and Interstate systems use even numbers for primary east–west routes and odd for north–south, there is no such rule for Illinois route numbers. Also, three-digit route numbers are usually not related to their one- or two-digit counterpart. There are several exceptions to this however.[citation needed]
General notes
Illinois has used route numbers from IL 1 through IL 186 inclusive[2] as well as many others up to IL 594.[3]
Illinois has used letter suffixes on several state highways, including "A", "B". "C", "N" (for north) and "S" (for south).[2] A, B and C suffixes were used for spurs of a nearby route, the N and S were legs of IL 113 on either side of the Kankakee River.[4]
Illinois has also used special routes, such as "Business", "Alternate", "City", "Bypass" and "Truck" on state-numbered highways. Only a pair of truck routes as well as a batch of Business Routes remain in Illinois, all other special state highways have been renumbered or the markers removed.[5]
Originally Chicago to St. Louis, mostly replaced by US 66 except from Springfield to Staunton where IL 4 was used on the old road and US 66 on the new; IL 4 replaced the old IL 43 Staunton to near Murphysboro
Originally the "22 Loop" around the Chicago metro area. It followed the current IL-22, then went to Crystal Lake via US-14, Aurora via IL-31 and Lynwood on US-30.
Originally Freeport to Polo, extended north to the state line to replace IL-74 and south to Bureau then E. Peoria replacing IL-89 and IL-87 in part. Rerouted to the I-180 bridge in the 1990s due to a bridge removal over the Illinois River
Originally was a "T" Shaped route from Harrisburg to Elizabethtown and a leg south to Golconda and a ferry went to KY-297 across the Ohio River. Extended to Benton and to Rosiclare in 1937. Part of this is now IL-146.
Originally Algonquin to Chicago (Harlem Ave.) on Algonquin Road west of Des Plaines. In Des Plaines, this was on Oakton Street and then in Park Ridge, it was Talcott Road into Chicago. IL 62 originally ended at IL 43 (Harlem Ave.) In 1974, IL 62 was removed east of IL 83 in Des Plaines.[7]
Inventory Route Number sign near Jacksonville IL (Morgan County) on US-67
Illinois uses unique "inventory number" signage on rural roads that are owned or maintained by IDOT but may or may not be part of the US or Illinois highway systems. These number signs are white squares, with a green divided circle. The county name is within the dividing line, the mileage from the county line is in the lower half and the inventory or route number in the upper. Number series vary between IDOT Districts, in some areas the number used on otherwise unnumbered routes are a derivative of the former number (i.e.: "913" used on a section of former IL 13) or a sequential number unrelated to the original or former number (such as the 8900 series numbers used in the Galesburg–Macomb area). On many US and Illinois Routes the posted number is used, with or without a preceding descriptor. These signs are not intended for navigation as route numbers are but rather as guides for IDOT crews and contractors and to identify specific intersections, culverts or other features.[10]
