Thomas Jefferson National Accelerator Facility

37°05′41″N 76°28′54″W

Thomas Jefferson National Accelerator Facility

Motto	“Exploring the nature of matter.”
Established	1984
Research Type	Nuclear physics
Budget	US$72 million (2004)
Director	Hugh E. Montgomery
Staff	675
Location	Newport News, Virginia
Campus	214 acres (87 ha)
Operating Agency	Jefferson Science Associates, LLC
Website	www.jlab.org

Aerial view of Jefferson Lab.

Thomas Jefferson National Accelerator Facility (TJNAF), commonly called Jefferson Lab or JLab, is a U.S. national laboratory in Newport News, Virginia. It is near exit 256 of Interstate 64. Since June 1, 2006, it has been operated by Jefferson Science Associates, LLC, a joint venture between Southeastern Universities Research Association, Inc., and CSC Applied Technologies, LLC. Until 1996 it was known as the Continuous Electron Beam Accelerator Facility (CEBAF). This name is still used a lot for the main accelerator.

Founded in 1984, JLab employs over 675 people. Over 2,000 scientists from around the world have conducted research using the facility. Its mission is "to provide forefront scientific facilities, opportunities and leadership essential for discovering the fundamental structure of nuclear matter; to partner in industry to apply its advanced technology; and to serve the nation and its communities through education and public outreach."^[1]

The facility is being rebuilt to increase its energy from 6 GeV to 12 GeV. To do this, more powerful magnets and power supplies are added to the accelerator. Also, a new experimental hall will be added.^[2] The CEBAF is shut down from May to December 2011 for installation and construction will be completed by 2013. Full operations will begin in 2015.^[3]

Accelerator

12GeV upgrade, currently under construction.

The laboratory's main research facility is the CEBAF accelerator, which consists of a polarized electron source and injector and a pair of 7/8 mile (1400 m) long superconducting RF linear accelerators. The ends of the two linear accelerators are connected to each other by two arc sections with magnets that bend the electron beam in an arc. So, the beam path is a race-track shaped oval. (Most accelerators, such as CERN or Fermilab, have a circular path with many short chambers to speed up the electrons spread along the circle.) As the electron beam makes up to five successive orbits, its energy is increased up to a maximum of 6 GeV. Effectively, CEBAF is a linear accelerator (LINAC), like SLAC at Stanford, that has been folded up to a tenth of its normal length. It acts as if it were a 7.8 mile long linear accelerator.

The design of CEBAF allows the electron beam to be continuous rather than the pulsed beam typical of ring shaped accelerators. (There is some beam structure but the pulses are very much shorter and closer together.) The electron beam is directed onto three potential targets (see below). One of the distinguishing features of JLab is the continuous nature of the electron beam, with a bunch length of less than 1 picosecond. Another is JLab's use of superconducting RF (SRF) technology, which uses liquid helium to cool niobium to approximately 4 K (−452.5°F), removing electrical resistance and allowing the most efficient transfer of energy to an electron. To achieve this, JLab uses the world's largest liquid helium refrigerator, and was one of the first large-scale implementators of SRF technology. The accelerator is built 8 meters, or approximately 25 feet, below the Earth's surface, and the walls of the accelerator tunnels are 2 feet thick.

The beam ends in three experimental halls, called Hall A, Hall B, and Hall C. Each hall contains a unique spectrometer to record the results of collisions between the electron beam and a stationary target. This allows physicists to study the structure of the atomic nucleus, specifically the interaction of the quarks that make up protons and neutrons of the nucleus.

Particle behavior

Each time around the loop, the beam passes through each of the two LINAC accelerators, but through a different set of bending magnets. (Each set is designed to handle a different beam speed.) The electrons make up to five passes through the LINAC accelerators.

Collision event

When a nucleus in the target is hit by an electron from the beam, an "interaction", or "event", occurs, scattering particles into the hall. Each hall contains an array of particle detectors that track the physical properties of the particles produced by the event. The detectors generate electrical pulses that are converted into digital values by analog to digital converters (ADCs), time to digital converters (TDCs) and pulse counters (scalers).

This digital data must be gathered and stored so that the physicist can later analyze the data and reconstruct the physics that occurred. The system of electronics and computers that perform this task is called a data acquisition system.

12 GeV upgrade

As of June 2010, construction has begun an additional end station, Hall D, on the opposite end of the accelerator from the other three halls, as well as an upgrade which doubles the beam energy to 12 GeV. Concurrently, an addition to the Test Lab, (where the SRF cavities used in CEBAF and other accelerators used worldwide are manufactured) is being constructed.

Free-electron laser

Schematic diagram of a free—electron laser

JLab houses the world's most powerful tunable free-electron laser, with an output of over 14 kilowatts. The United States Navy funds this research to develop an laser that could shoot down missiles.^[4] Because the lab does classified military research, it is closed to the public except for an open house held once every two years.

The JLab free-electron laser uses an energy recovery LINAC. Electrons are injected into a linear accelerator. The fast-moving electrons then pass through a wiggler which produces a bright laser light beam. The electrons are then captured and steered back to the injection end of the LINAC where they transfer most of their energy to a new batch of electrons to repeat the process. By reusing the electrons and most of their energy, the free-electron laser requires less electricity to operate.^[5] The JLab is the first energy recovery LINAC to produce ultravoliet light. Cornell University is now trying to build one to produce X-rays.^[6]

CODA

Since CEBAF has three complementary experiments running simultaneously, it was decided that the three data acquisition systems should be as similar as possible, so that physicists moving from one experiment to another would find a familiar environment. To that end, a group of specialist physicists was hired to form a data acquisition development group to develop a common system for all three halls. CODA, the CEBAF Online Data Acquisition system, was the result [1]

Description

CODA is a set of software tools and recommended hardware that helps build a data acquisition system for nuclear physics experiments. In nuclear and particle physics experiments, the particle tracks are digitized by the data acquisition system, but the detectors are capable of generating a large number of possible measurements, or "data channels".

The ADC, TDC and other digital electronics are typically large circuit boards with connectors at the front edge that provide input and output for digital signals, and a connector at the back that plugs into a backplane. A group of boards are plugged into a chassis, or "crate", that provides physical support, power and cooling for the boards and backplane. This arrangement allows electronics capable of digitizing many hundreds of channels to fit into a single chassis.

In the CODA system, each chassis contains a board that is an intelligent controller for the rest of the chassis. This board, called a ReadOut Controller (ROC), configures each of the digitizing boards upon first receiving data, reads the data from the digitizers, and formats the data for later analysis.^[7]

References

1. Ware, Linda (September 26, 2005). "Jefferson Lab scientists set to test germ-killing fabrics". Press Release PR-JLAB-05-4. Argonne, IL: Lightsources.org. Archived from the original on July 8, 2007. Retrieved October 3, 2005.
2. "12 GeV Upgrade". Retrieved December 31, 2011.
3. Hesla, Leah (9 June 2011). "The 12-GeV upgrade of Jefferson Lab's CEBAF accelerator". International Linear Collider Newsline. Retrieved December 31, 2011.
4. "Energy Department announces $225 million for lab". The Virginian-Pilot. April 20, 2004. Retrieved December 31, 2011.^{[permanent dead link]}
5. "Free-Electron Laser Description". Retrieved December 31, 2011.
6. Hesla, Leah (27 January 2011). "Cornell makes progress on Energy Recovery Linac". International Linear Collider Newsline. Retrieved December 31, 2011.
7. Mecking, B.A.; et al. (11 May 2003). "The CEBAF large acceptance spectrometer (CLAS)". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 503 (3): 513–553. Bibcode:2003NIMPA.503..513M. doi:10.1016/S0168-9002(03)01001-5. Retrieved December 31, 2011.

Other websites

• Thomas Jefferson National Accelerator Facility, official site
• Google Hybrid Map of TJNAF
• MSN Virtual Earth Aerial Map
• Physics Division at Jefferson Lab (includes links to each of the experimental halls)
• Free-Electron Laser Program
• 12 GeV Upgrade
• K-12 Science Education