Template:Converti/Generate data

-- Conversion data used by [[Module:Convert]] which uses mw.loadData() for -- read-only access to this module so that it is loaded only once…

-- Conversion data used by [[Module:Convert]] which uses mw.loadData() for
-- read-only access to this module so that it is loaded only once per page.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
--
-- These data tables follow:
--   all_units           all properties for a unit, including default output
--   default_exceptions  exceptions for default output ('kg' and 'g' have different defaults)
--   link_exceptions     exceptions for links ('kg' and 'g' have different links)
--
-- These tables are generated by a script which reads the wikitext of a page that
-- documents the required properties of each unit; see [[:en:Module:Convert/doc]].

---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above).   --
---------------------------------------------------------------------------
local all_units = {
    ["cm/s2"] = {
	name1    = "centimetro per secondo quadro",
	name2    = "centimetri per secondo quadro",
	symbol   = "cm/s²",
	utype    = "accelerazione",
	scale    = 0.01,
	default  = "ft/s2",
	link     = "Gal",
    },
    ["ft/s2"] = {
	name1    = "piede per secondo quadro",
	name2    = "piedi per secondo quadro",
	symbol   = "ft/s²",
	utype    = "accelerazione",
	scale    = 0.3048,
	default  = "m/s2",
    },
    ["g0"] = {
	name1    = "gravità standard",
	symbol   = "''g<sub>0</sub>''",
	utype    = "accelerazione",
	scale    = 9.80665,
	default  = "m/s2",
    },
    ["km/hs"] = {
	name1    = "chilometro per ora per secondo",
	name2    = "chilometri per ora per secondo",
	symbol   = "km/(h⋅s)",
	utype    = "accelerazione",
	scale    = 0.27777777777777779,
	default  = "mph/s",
    },
    ["km/s2"] = {
	name1    = "chilometro per secondo quadro",
	name2    = "chilometri per secondo quadro",
	symbol   = "km/s²",
	utype    = "accelerazione",
	scale    = 1000,
	default  = "mph/s",
    },
    ["m/s2"] = {
	name1    = "metro per secondo quadro",
	name2    = "metri per secondo quadro",
	symbol   = "m/s²",
	utype    = "accelerazione",
	scale    = 1,
	default  = "ft/s2",
	link     = "Metro al secondo quadrato",
    },
    ["mph/s"] = {
	name1    = "miglia per ora per secondo",
	symbol   = "mph/s",
	utype    = "accelerazione",
	scale    = 0.44704,
	default  = "km/hs",
    },
    ["km/h/s"] = {
	target   = "km/hs",
    },
    ["gravità standard"] = {
	target   = "g0",
    },
    ["1000sqft"] = {
	name1    = "migliaia di piedi quadri",
	symbol   = "1000&nbsp;sq&nbsp;ft",
	utype    = "area",
	scale    = 92.90304,
	default  = "m2",
	link     = "Piede quadro",
    },
    ["a"] = {
	_name1   = "ara",
	_name2   = "are",
	_symbol  = "a",
	utype    = "area",
	scale    = 100,
	prefixes = 1,
	default  = "sqft",
	link     = "Ara (unità di misura)",
    },
    ["acro"] = {
	name2    = "acri",
	symbol   = "acro",
	usename  = 1,
	utype    = "area",
	scale    = 4046.8564224,
	default  = "ha",
	subdivs  = { ["rood"] = { 4, default = "ha" }, ["sqperch"] = { 160, default = "ha" } },
    },
    ["arpent"] = {
	symbol   = "arpent",
	usename  = 1,
	utype    = "area",
	scale    = 3418.89,
	default  = "ha",
    },
    ["cda"] = {
	name1    = "cuerda",
	symbol   = "cda",
	utype    = "area",
	scale    = 3930.395625,
	default  = "ha acro",
    },
    ["daa"] = {
	name1    = "decaro",
	symbol   = "daa",
	utype    = "area",
	scale    = 1000,
	default  = "km2 sqmi",
    },
    ["dunam"] = {
	symbol   = "dunam",
	usename  = 1,
	utype    = "area",
	scale    = 1000,
	default  = "km2 sqmi",
	link     = "Dunum",
    },
    ["dunum"] = {
	symbol   = "dunum",
	usename  = 1,
	utype    = "area",
	scale    = 1000,
	default  = "km2 sqmi",
    },
    ["ha"] = {
	name1    = "ettaro",
	name2    = "ettari",
	symbol   = "ha",
	utype    = "area",
	scale    = 10000,
	default  = "acro",
    },
    ["hectare"] = {
	name1    = "ettaro",
	name2    = "ettari",
	symbol   = "ha",
	usename  = 1,
	utype    = "area",
	scale    = 10000,
	default  = "acro",
    },
    ["acro irlandese"] = {
	name1    = "acro irlandese",
	name2    = "acri irlandesi",
	symbol   = "acro&nbsp;irlandese",
	utype    = "area",
	scale    = 6555.2385024,
	default  = "ha",
    },
    ["m2"] = {
	_name1   = "metro quadro",
	_name2   = "metri quadri",
	_symbol  = "m²",
	utype    = "area",
	scale    = 1,
	prefixes = 2,
	default  = "sqft",
	link     = "Metro quadrato",
    },
    ["pondemaat"] = {
	name1    = "pondemaat",
	symbol   = "pond",
	utype    = "area",
	scale    = 3674.363358816,
	default  = "m2",
    },
    ["pyeong"] = {
	symbol   = "pyeong",
	usename  = 1,
	utype    = "area",
	scale    = 3.3057851239669422,
	default  = "m2",
    },
    ["rai"] = {
	symbol   = "rai",
	utype    = "area",
	scale    = 1600,
	default  = "m2",
	link     = "Rai (unità di misura)",
    },
    ["rood"] = {
	symbol   = "rood",
	usename  = 1,
	utype    = "area",
	scale    = 1011.7141056,
	default  = "sqft m2",
	subdivs  = { ["sqperch"] = { 40, default = "m2" } },
    },
    ["sqft"] = {
	name1    = "piede quadro",
	name2    = "piedi quadri",
	symbol   = "ft²",
	utype    = "area",
	scale    = 0.09290304,
	default  = "m2",
    },
    ["sqin"] = {
	name1    = "pollice quadro",
	name2    = "pollici quadri",
	symbol   = "in²",
	utype    = "area",
	scale    = 0.00064516,
	default  = "cm2",
    },
    ["sqmi"] = {
	name1    = "miglio quadro",
	name2    = "miglia quadre",
	symbol   = "mi²",
	utype    = "area",
	scale    = 2589988.110336,
	default  = "km2",
    },
    ["sqnmi"] = {
	name1    = "miglio nautico quadro",
	name2    = "miglia nautiche quadre",
	symbol   = "sq nmi²",
	utype    = "area",
	scale    = 3429904,
	default  = "km2 sqmi",
	link     = "Miglio nautico",
    },
    ["sqperch"] = {
	symbol   = "perch",
	usename  = 1,
	utype    = "area",
	scale    = 25.29285264,
	default  = "m2",
    },
    ["versta quadra"] = {
	name1    = "verst quadra",
	name2    = "verst quadre",
	symbol   = "versta quadra",
	usename  = 1,
	utype    = "area",
	scale    = 1138062.24,
	default  = "km2 sqmi",
	link     = "Versta",
    },
    ["sqyd"] = {
	name1    = "iarda quadra",
	name2    = "iarde quadre",
	symbol   = "yd²",
	utype    = "area",
	scale    = 0.83612736,
	default  = "m2",
	link     = "Iarda",
    },
    ["tsubo"] = {
	symbol   = "tsubo",
	usename  = 1,
	utype    = "area",
	scale    = 3.3057851239669422,
	default  = "m2",
    },
    ["acre"] = {
	target   = "acro",
    },
    ["acres"] = {
	target   = "acro",
    },
    ["acri"] = {
	target   = "acro",
    },
    ["ara"] = {
	target   = "a",
    },
    ["decare"] = {
	target   = "daa",
    },
    ["ettaro"] = {
	target   = "ha",
    },
    ["ettari"] = {
	target   = "ha",
    },
    ["foot2"] = {
	target   = "sqft",
    },
    ["ft2"] = {
	target   = "sqft",
    },
    ["in2"] = {
	target   = "sqin",
    },
    ["km²"] = {
	target   = "km2",
    },
    ["kmq"] = {
	target   = "km2",
    },
    ["mi2"] = {
	target   = "sqmi",
    },
    ["milioni di acri"] = {
	target   = "e6acro",
    },
    ["milione di acri"] = {
	target   = "e6acro",
    },
    ["milioni di ettari"] = {
	target   = "e6ha",
    },
    ["m²"] = {
	target   = "m2",
    },
    ["mq"] = {
	target   = "m2",
    },
    ["nmi2"] = {
	target   = "sqnmi",
    },
    ["pond"] = {
	target   = "pondemaat",
    },
    ["sq arp"] = {
	target   = "arpent",
    },
    ["sqfoot"] = {
	target   = "sqft",
    },
    ["sqkm"] = {
	target   = "km2",
    },
    ["sqm"] = {
	target   = "m2",
    },
    ["versta2"] = {
	target   = "versta quadra",
    },
    ["yd2"] = {
	target   = "sqyd",
    },
    ["C-change"] = {
	name1    = "grado di variazione Celsius",
	name2    = "gradi di variazione Celsius",
	symbol   = "°C",
	usesymbol= 1,
	utype    = "cambiamento di temperatura",
	scale    = 1,
	default  = "F-change",
	link     = "Grado Celsius",
    },
    ["F-change"] = {
	name1    = "grado di variazione Fahrenheit",
	name2    = "gradi di variazione Fahrenheit",
	symbol   = "°F",
	usesymbol= 1,
	utype    = "cambiamento di temperatura",
	scale    = 0.55555555555555558,
	default  = "C-change",
	link     = "Grado Fahrenheit",
    },
    ["K-change"] = {
	name1    = "grado di variazione kelvin",
	name2    = "gradi di variazione kelvin",
	symbol   = "K",
	usesymbol= 1,
	utype    = "cambiamento di temperatura",
	scale    = 1,
	default  = "F-change",
	link     = "Kelvin",
    },
    ["°C-change"] = {
	target   = "C-change",
    },
    ["°F-change"] = {
	target   = "F-change",
    },
    ["variazione C"] = {
	target   = "C-change",
    },
    ["variazione F"] = {
	target   = "F-change",
    },
    ["variazione °C"] = {
	target   = "C-change",
    },
    ["variazione °F"] = {
	target   = "F-change",
    },
    ["variazione K"] = {
	target   = "K-change",
    },
    ["A/m"] = {
	name1    = "ampere su metro",
	symbol   = "A/m",
	utype    = "campo magnetizzante",
	scale    = 1,
	default  = "Oe",
	link     = "Campo magnetico",
    },
    ["kA/m"] = {
	name1    = "chiloampere su metro",
	symbol   = "kA/m",
	utype    = "campo magnetizzante",
	scale    = 1000,
	default  = "kOe",
	link     = "Campo magnetico",
    },
    ["MA/m"] = {
	name1    = "megaampere su metro",
	symbol   = "MA/m",
	utype    = "campo magnetizzante",
	scale    = 1e6,
	default  = "kOe",
	link     = "Campo magnetico",
    },
    ["Oe"] = {
	_name1   = "oersted",
	_symbol  = "Oe",
	utype    = "campo magnetizzante",
	scale    = 79.5774715,
	prefixes = 1,
	default  = "kA/m",
	link     = "Oersted (unità di misura)",
    },
    ["A.h"] = {
	name1    = "ampere-ora",
	symbol   = "A⋅h",
	utype    = "carica elettrica",
	scale    = 3600,
	default  = "coulomb",
    },
    ["coulomb"] = {
	_name1   = "coulomb",
	_symbol  = "C",
	utype    = "carica elettrica",
	scale    = 1,
	prefixes = 1,
	default  = "e",
	link     = "Coulomb",
    },
    ["e"] = {
	name1    = "carica elementare",
	name2    = "cariche elementari",
	symbol   = "''e''",
	utype    = "carica elettrica",
	scale    = 1.602176487e-19,
	default  = "coulomb",
    },
    ["Ah"] = {
	target   = "A.h",
    },
    ["kgCO2/L"] = {
	name1    = "chilogrammo per litro",
	name2    = "chilogrammi per litro",
	symbol   = "kg(CO<sub>2</sub>)/L",
	utype    = "co2 per unità di volume",
	scale    = 1000,
	default  = "lbCO2/USgal",
    },
    ["lbCO2/USgal"] = {
	name1    = "libbra per gallone americano",
	name2    = "libbre per gallone americano",
	symbol   = "lbCO2/US&nbsp;gal",
	utype    = "co2 per unità di volume",
	scale    = 119.82642731689663,
	default  = "kgCO2/L",
    },
    ["oz/lb"] = {
	per      = { "oz", "lb" },
	utype    = "concentrazione",
	default  = "mg/kg",
    },
    ["mg/kg"] = {
	per      = { "mg", "kg" },
	utype    = "concentrazione",
	default  = "oz/lb",
    },
    ["g/dm3"] = {
	name1    = "grammo per decimetro cubo",
	name2    = "grammi per decimetro cubo",
	symbol   = "g/dm³",
	utype    = "densità",
	scale    = 1,
	default  = "kg/m3",
	link     = "Densità",
    },
    ["g/L"] = {
	name1    = "grammo per litro",
	name2    = "grammi per litro",
	symbol   = "g/L",
	utype    = "densità",
	scale    = 1,
	default  = "lb/cuin",
	link     = "Densità",
    },
    ["g/mL"] = {
	name1    = "grammo per millilitro",
	name2    = "grammi per millilitro",
	symbol   = "g/mL",
	utype    = "densità",
	scale    = 1000,
	default  = "lb/cuin",
	link     = "Densità",
    },
    ["g/ml"] = {
	name1    = "grammo per millilitro",
	name2    = "grammi per millilitro",
	symbol   = "g/ml",
	utype    = "densità",
	scale    = 1000,
	default  = "lb/cuin",
	link     = "Densità",
    },
    ["kg/dm3"] = {
	name1    = "chilogrammo per decimetro cubo",
	name2    = "chilogrammi per decimetro cubo",
	symbol   = "kg/dm³",
	utype    = "densità",
	scale    = 1000,
	default  = "lb/cuft",
	link     = "Densità",
    },
    ["kg/L"] = {
	name1    = "chilogrammo per litro",
	name2    = "chilogrammi per litro",
	symbol   = "kg/L",
	utype    = "densità",
	scale    = 1000,
	default  = "lb/USgal",
	link     = "Densità",
    },
    ["kg/l"] = {
	name1    = "chilogrammo per litro",
	name1_us = "kilograms per liter",
	name2    = "chilogrammi per litro",
	symbol   = "kg/l",
	utype    = "densità",
	scale    = 1000,
	default  = "lb/USgal",
	link     = "Densità",
    },
    ["kg/m3"] = {
	name1    = "chilogrammo per metro cubo",
	name2    = "chilogrammi per metro cubo",
	symbol   = "kg/m³",
	utype    = "densità",
	scale    = 1,
	default  = "lb/cuyd",
	link     = "Densità",
    },
    ["lb/cuft"] = {
	name1    = "libbra per piede cubo",
	name2    = "libbre per piede cubo",
	symbol   = "lb/cu&nbsp;ft",
	utype    = "densità",
	scale    = 16.018463373960142,
	default  = "g/cm3",
	link     = "Densità",
    },
    ["lb/cuin"] = {
	name1    = "libbra per pollice cubo",
	name2    = "libbre per pollice cubo",
	symbol   = "lb/cu&nbsp;in",
	utype    = "densità",
	scale    = 27679.904710203122,
	default  = "g/cm3",
	link     = "Densità",
    },
    ["lb/cuyd"] = {
	name1    = "libbra per iarda cuba",
	name2    = "libbre per iarde cube",
	symbol   = "lb/cu&nbsp;yd",
	utype    = "densità",
	scale    = 0.5932764212577829,
	default  = "kg/m3",
	link     = "Densità",
    },
    ["lb/impgal"] = {
	name1    = "libbra per gallone imperiale",
	name2    = "libbre per gallone imperiale",
	symbol   = "lb/imp&nbsp;gal",
	utype    = "densità",
	scale    = 99.776372663101697,
	default  = "kg/L",
	link     = "Densità",
    },
    ["lb/in3"] = {
	name1    = "libbra per pollice cubo",
	name2    = "libbre per pollice cubo",
	symbol   = "lb/cu&thinsp;in",
	utype    = "densità",
	scale    = 27679.904710203122,
	default  = "g/cm3",
	link     = "Densità",
    },
    ["lb/U.S.gal"] = {
	name1    = "libbra per gallone US",
	name2    = "libbre per gallone US",
	symbol   = "lb/U.S.&nbsp;gal",
	utype    = "densità",
	scale    = 119.82642731689663,
	default  = "kg/L",
	link     = "Densità",
    },
    ["lb/USbu"] = {
	name1    = "libbra per bushel US",
	name2    = "libbre per bushel US",
	symbol   = "lb/US&nbsp;bu",
	utype    = "densità",
	scale    = 12.871859780974471,
	default  = "kg/m3",
	link     = "Bushel",
    },
    ["lb/USgal"] = {
	name1    = "libbra per gallone US",
	name2    = "libbre per gallone US",
	symbol   = "lb/US&nbsp;gal",
	utype    = "densità",
	scale    = 119.82642731689663,
	default  = "kg/L",
	link     = "Densità",
    },
    ["lbm/cuin"] = {
	name1    = "massa libbra per pollice cubo",
	name2    = "massa libbre per pollice cubo",
	symbol   = "lbm/cu&thinsp;in",
	utype    = "densità",
	scale    = 27679.904710203122,
	default  = "g/cm3",
	link     = "Densità",
    },
    ["mg/L"] = {
	name1    = "milligramo per litro",
	name2    = "milligrammi per litro",
	symbol   = "mg/L",
	utype    = "densità",
	scale    = 0.001,
	default  = "lb/cuin",
	link     = "Densità",
    },
    ["oz/cuin"] = {
	name1    = "oncia per pollice cubo",
	name2    = "once per pollice cubo",
	symbol   = "oz/cu&nbsp;in",
	utype    = "densità",
	scale    = 1729.9940443876951,
	default  = "g/cm3",
	link     = "Densità",
    },
    ["g/cm3"] = {
	per      = { "g", "cm3" },
	utype    = "densità",
	default  = "lb/cuin",
	link     = "Densità",
    },
    ["g/m3"] = {
	per      = { "g", "m3" },
	utype    = "densità",
	default  = "lb/cuyd",
	link     = "Densità",
    },
    ["Mg/m3"] = {
	per      = { "Mg", "m3" },
	utype    = "densità",
	default  = "lb/cuft",
    },
    ["mg/l"] = {
	per      = { "mg", "l" },
	utype    = "densità",
	default  = "oz/cuin",
    },
    ["μg/dL"] = {
	per      = { "μg", "dL" },
	utype    = "densità",
	default  = "lb/cuin",
    },
    ["μg/l"] = {
	per      = { "μg", "l" },
	utype    = "densità",
	default  = "oz/cuin",
    },
    ["lb/ft3"] = {
	target   = "lb/cuft",
    },
    ["lb/yd3"] = {
	target   = "lb/cuyd",
    },
    ["lbm/in3"] = {
	target   = "lbm/cuin",
    },
    ["mcg/dL"] = {
	target   = "μg/dL",
    },
    ["oz/in3"] = {
	target   = "oz/cuin",
    },
    ["ug/dL"] = {
	target   = "μg/dL",
    },
    ["ug/l"] = {
	target   = "μg/l",
    },
    ["dtex"] = {
	name1    = "decitex",
	symbol   = "dtex",
	utype    = "densità lineare",
	scale    = 1e-7,
	default  = "lb/yd",
	link     = "Tex (unità di misura)",
    },
    ["kg/cm"] = {
	name1    = "chilogrammo per centrimetro",
	name2    = "chilogrammi per centimetro",
	symbol   = "kg/cm",
	utype    = "densità lineare",
	scale    = 100,
	default  = "lb/yd",
	link     = "Densità lineare",
    },
    ["kg/m"] = {
	name1    = "chilogrammo per metro",
	name2    = "chilogrammi per metro",
	symbol   = "kg/m",
	utype    = "densità lineare",
	scale    = 1,
	default  = "lb/yd",
	link     = "Densità lineare",
    },
    ["lb/ft"] = {
	name1    = "libbra per piede",
	name2    = "libbre per piede",
	symbol   = "lb/ft",
	utype    = "densità lineare",
	scale    = 1.4881639435695539,
	default  = "kg/m",
	link     = "Densità lineare",
    },
    ["lb/yd"] = {
	name1    = "libbra per iarda",
	name2    = "libbre per iarde",
	symbol   = "lb/yd",
	utype    = "densità lineare",
	scale    = 0.49605464785651798,
	default  = "kg/m",
	link     = "Densità lineare",
    },
    ["Gy"] = {
	_name1   = "gray",
	_symbol  = "Gy",
	utype    = "dose assorbita di radiazione",
	scale    = 1,
	prefixes = 1,
	default  = "rad",
	link     = "Gray (unità di misura)",
    },
    ["rad"] = {
	_name1   = "rad",
	_symbol  = "rad",
	utype    = "dose assorbita di radiazione",
	scale    = 0.01,
	prefixes = 1,
	default  = "Gy",
	link     = "Rad (unità di misura)",
    },
    ["Sv"] = {
	_name1   = "sievert",
	_symbol  = "Sv",
	utype    = "dose equivalente di radiazione",
	scale    = 1,
	prefixes = 1,
	default  = "rem",
	link     = "Sievert",
    },
    ["rem"] = {
	_name1   = "rem",
	_symbol  = "rem",
	utype    = "dose equivalente di radiazione",
	scale    = 0.01,
	prefixes = 1,
	default  = "Sv",
	link     = "Röntgen equivalent man",
    },
    ["impgal/mi"] = {
	per      = { "@impgal", "mi" },
	utype    = "efficienza del carburante",
	default  = "l/km USgal/mi",
    },
    ["km/L"] = {
	per      = { "km", "L" },
	utype    = "efficienza del carburante",
	default  = "mpgimp mpgus",
    },
    ["km/l"] = {
	per      = { "km", "l" },
	utype    = "efficienza del carburante",
	default  = "mpgimp mpgus",
    },
    ["L/100 km"] = {
	per      = { "L", "100km" },
	utype    = "efficienza del carburante",
	default  = "mpgimp mpgus",
    },
    ["l/100 km"] = {
	per      = { "l", "100km" },
	utype    = "efficienza del carburante",
	default  = "mpgimp mpgus",
    },
    ["L/km"] = {
	per      = { "L", "km" },
	utype    = "efficienza del carburante",
	default  = "mpgimp mpgus",
    },
    ["l/km"] = {
	per      = { "l", "km" },
	utype    = "efficienza del carburante",
	default  = "mpgimp mpgus",
    },
    ["mi/impqt"] = {
	per      = { "mi", "impqt" },
	utype    = "efficienza del carburante",
	default  = "km/L",
    },
    ["mi/U.S.qt"] = {
	per      = { "mi", "U.S.qt" },
	utype    = "efficienza del carburante",
	default  = "km/L",
    },
    ["mi/USqt"] = {
	per      = { "mi", "USqt" },
	utype    = "efficienza del carburante",
	default  = "km/L",
    },
    ["mi/usqt"] = {
	per      = { "mi", "usqt" },
	utype    = "efficienza del carburante",
	default  = "km/L",
    },
    ["mpgimp"] = {
	per      = { "mi", "@impgal" },
	symbol   = "mpg<sub>&#8209;imp</sub>",
	utype    = "efficienza del carburante",
	default  = "L/100 km+mpgus",
	symlink  = "[[Miglia per gallone]]",
    },
    ["mpgus"] = {
	per      = { "mi", "+USgal" },
	symbol   = "mpg<sub>&#8209;US</sub>",
	utype    = "efficienza del carburante",
	default  = "L/100 km+mpgimp",
	symlink  = "[[Miglia per gallone]]",
    },
    ["U.S.gal/mi"] = {
	per      = { "*U.S.gal", "mi" },
	utype    = "efficienza del carburante",
	default  = "l/km",
    },
    ["usgal/mi"] = {
	per      = { "+USgal", "mi" },
	utype    = "efficienza del carburante",
	default  = "l/km",
    },
    ["L/100km"] = {
	target   = "L/100 km",
    },
    ["l/100km"] = {
	target   = "l/100 km",
    },
    ["mpg"] = {
	shouldbe = "Usare %{mpgus%} per miglia per gallone US o %{mpgimp%} per miglia per gallone imperiale (non %{mpg%})",
    },
    ["mpgU.S."] = {
	target   = "mpgus",
	symbol   = "mpg<sub>&#8209;U.S.</sub>",
	symlink  = "[[Miglia per gallone]]",
    },
    ["mpgu.s."] = {
	target   = "mpgus",
	symbol   = "mpg<sub>&#8209;U.S.</sub>",
	symlink  = "[[Miglia per gallone]]",
    },
    ["mpgUS"] = {
	target   = "mpgus",
    },
    ["USgal/mi"] = {
	target   = "usgal/mi",
    },
    ["g/km"] = {
	name1    = "grammo per chilometro",
	name2    = "grammi per chilometro",
	symbol   = "g/km",
	utype    = "emissioni di scarico",
	scale    = 1e-6,
	default  = "oz/mi",
    },
    ["g/mi"] = {
	name1    = "grammo per miglio",
	name2    = "grammi per miglio",
	symbol   = "g/mi",
	utype    = "emissioni di scarico",
	scale    = 6.2137119223733397e-7,
	default  = "g/km",
    },
    ["gCO2/km"] = {
	name1    = "grammo di CO<sub>2</sub> per chilometro",
	name2    = "grammi di CO<sub>2</sub> per chilometro",
	symbol   = "g(CO<sub>2</sub>)/km",
	utype    = "emissioni di scarico",
	scale    = 1e-6,
	default  = "ozCO2/mi",
    },
    ["gCO2/mi"] = {
	name1    = "grammo di CO<sub>2</sub> per miglio",
	name2    = "grammi di CO<sub>2</sub> per miglio",
	symbol   = "g(CO<sub>2</sub>)/mi",
	utype    = "emissioni di scarico",
	scale    = 6.2137119223733397e-7,
	default  = "gCO2/km",
    },
    ["kg/km"] = {
	name1    = "chilogrammo per chilometro",
	name2    = "chilogrammi per chilometro",
	symbol   = "kg/km",
	utype    = "emissioni di scarico",
	scale    = 0.001,
	default  = "lb/mi",
    },
    ["kgCO2/km"] = {
	name1    = "chilogrammo di CO<sub>2</sub> per chilometro",
	name2    = "chilogrammi di CO<sub>2</sub> per chilometro",
	symbol   = "kg(CO<sub>2</sub>)/km",
	utype    = "emissioni di scarico",
	scale    = 0.001,
	default  = "lbCO2/mi",
    },
    ["lb/mi"] = {
	name1    = "libbra per miglio",
	name2    = "libbre per miglio",
	symbol   = "lb/mi",
	utype    = "emissioni di scarico",
	scale    = 0.00028184923173665794,
	default  = "kg/km",
    },
    ["lbCO2/mi"] = {
	name1    = "libbra di CO<sub>2</sub> per miglio",
	name2    = "libbre di CO<sub>2</sub> per miglio",
	symbol   = "lb(CO<sub>2</sub>)/mi",
	utype    = "emissioni di scarico",
	scale    = 0.00028184923173665794,
	default  = "kgCO2/km",
    },
    ["oz/mi"] = {
	name1    = "oncia per miglio",
	name2    = "once per miglio",
	symbol   = "oz/mi",
	utype    = "emissioni di scarico",
	scale    = 1.7615576983541121e-5,
	default  = "g/km",
    },
    ["ozCO2/mi"] = {
	name1    = "once di CO<sub>2</sub> per miglio",
	symbol   = "oz(CO<sub>2</sub>)/mi",
	utype    = "emissioni di scarico",
	scale    = 1.7615576983541121e-5,
	default  = "gCO2/km",
    },
    ["B.O.T.U."] = {
	name1    = "Board of Trade Unit",
	symbol   = "B.O.T.U.",
	utype    = "energia",
	scale    = 3600000,
	default  = "MJ",
	link     = "Wattora",
    },
    ["bboe"] = {
	name1    = "barile equivalente di petrolio",
	name2    = "barili equivalenti di petrolio",
	symbol   = "bboe",
	utype    = "energia",
	scale    = 6117863200,
	default  = "GJ",
    },
    ["BOE"] = {
	name1    = "barile equivalente di petrolio",
	name2    = "barili equivalenti di petrolio",
	symbol   = "BOE",
	utype    = "energia",
	scale    = 6117863200,
	default  = "GJ",
    },
    ["BTU"] = {
	name1    = "British thermal unit",
	symbol   = "BTU",
	utype    = "energia",
	scale    = 1055.05585262,
	default  = "kJ",
    },
    ["Btu"] = {
	name1    = "British thermal unit",
	symbol   = "Btu",
	utype    = "energia",
	scale    = 1055.05585262,
	default  = "kJ",
    },
    ["BTU-39F"] = {
	name1    = "British thermal unit (39 °F)",
	symbol   = "BTU<sub>39 °F</sub>",
	utype    = "energia",
	scale    = 1059.67,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-39F"] = {
	name1    = "British thermal unit (39 °F)",
	symbol   = "Btu<sub>39 °F</sub>",
	utype    = "energia",
	scale    = 1059.67,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["BTU-59F"] = {
	name1    = "British thermal unit (59 °F)",
	symbol   = "BTU<sub>59 °F</sub>",
	utype    = "energia",
	scale    = 1054.804,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-59F"] = {
	name1    = "British thermal unit (59 °F)",
	symbol   = "Btu<sub>59 °F</sub>",
	utype    = "energia",
	scale    = 1054.804,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["BTU-60F"] = {
	name1    = "British thermal unit (60 °F)",
	symbol   = "BTU<sub>60 °F</sub>",
	utype    = "energia",
	scale    = 1054.68,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-60F"] = {
	name1    = "British thermal unit (60 °F)",
	symbol   = "Btu<sub>60 °F</sub>",
	utype    = "energia",
	scale    = 1054.68,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["BTU-63F"] = {
	name1    = "British thermal unit (63 °F)",
	symbol   = "BTU<sub>63 °F</sub>",
	utype    = "energia",
	scale    = 1054.6,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-63F"] = {
	name1    = "British thermal unit (63 °F)",
	symbol   = "Btu<sub>63 °F</sub>",
	utype    = "energia",
	scale    = 1054.6,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["BTU-ISO"] = {
	name1    = "British thermal unit (ISO)",
	symbol   = "BTU<sub>ISO</sub>",
	utype    = "energia",
	scale    = 1055.056,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-ISO"] = {
	target   = "BTU-ISO",
    },
    ["BTU-IT"] = {
	name1    = "British thermal unit (IT)",
	symbol   = "BTU<sub>IT</sub>",
	utype    = "energia",
	scale    = 1055.05585262,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-IT"] = {
	name1    = "British thermal unit (IT)",
	symbol   = "Btu<sub>IT</sub>",
	utype    = "energia",
	scale    = 1055.05585262,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["BTU-mean"] = {
	name1    = "British thermal unit (mean)",
	symbol   = "BTU<sub>mean</sub>",
	utype    = "energia",
	scale    = 1055.87,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-mean"] = {
	name1    = "British thermal unit (mean)",
	symbol   = "Btu<sub>mean</sub>",
	utype    = "energia",
	scale    = 1055.87,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["BTU-th"] = {
	name1    = "British thermal unit (termochimica)",
	symbol   = "BTU<sub>th</sub>",
	utype    = "energia",
	scale    = 1054.35026444,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Btu-th"] = {
	name1    = "British thermal unit (termochimica)",
	symbol   = "Btu<sub>th</sub>",
	utype    = "energia",
	scale    = 1054.35026444,
	default  = "kJ",
	link     = "British thermal unit",
    },
    ["Cal"] = {
	name1    = "grande caloria",
	name2    = "grandi calorie",
	symbol   = "Cal",
	utype    = "energia",
	scale    = 4184,
	default  = "kJ",
	link     = "Caloria",
    },
    ["cal"] = {
	name1    = "caloria",
	name2    = "calorie",
	symbol   = "cal",
	utype    = "energia",
	scale    = 4.184,
	default  = "J",
    },
    ["Cal-15"] = {
	name1    = "grande caloria (15 °C)",
	name2    = "grandi calorie (15 °C)",
	symbol   = "Cal<sub>15</sub>",
	utype    = "energia",
	scale    = 4185.8,
	default  = "kJ",
	link     = "Caloria",
    },
    ["cal-15"] = {
	name1    = "caloria (15 °C)",
	name2    = "calorie (15 °C)",
	symbol   = "cal<sub>15</sub>",
	utype    = "energia",
	scale    = 4.1858,
	default  = "J",
	link     = "Caloria",
    },
    ["Cal-IT"] = {
	name1    = "grande caloria (International Steam Table)",
	name2    = "grandi calorie (International Steam Table)",
	symbol   = "Cal<sub>IT</sub>",
	utype    = "energia",
	scale    = 4186.8,
	default  = "kJ",
	link     = "Caloria#Varianti",
    },
    ["cal-IT"] = {
	name1    = "caloria (International Steam Table)",
	name2    = "calorie (International Steam Table)",
	symbol   = "cal<sub>IT</sub>",
	utype    = "energia",
	scale    = 4.1868,
	default  = "J",
	link     = "Caloria#Varianti",
    },
    ["Cal-th"] = {
	name1    = "grande caloria (termochimica)",
	name2    = "grandi calorie (termochimica)",
	symbol   = "Cal<sub>th</sub>",
	utype    = "energia",
	scale    = 4184,
	default  = "kJ",
	link     = "Caloria#Varianti",
    },
    ["cal-th"] = {
	name1    = "caloria (termochimica)",
	name2    = "calorie (termochimica)",
	symbol   = "cal<sub>th</sub>",
	utype    = "energia",
	scale    = 4.184,
	default  = "J",
	link     = "Caloria#Varianti",
    },
    ["ccatm"] = {
	name1    = "centimetro cubo-atmosfera",
	name1_us = "centimetri cub-atmosfera",
	symbol   = "cc⋅atm",
	utype    = "energia",
	scale    = 0.101325,
	default  = "mJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["CHU-IT"] = {
	name1    = "unità di calore Celsius (International Table)",
	symbol   = "CHU<sub>IT</sub>",
	utype    = "energia",
	scale    = 1899.100534716,
	default  = "kJ",
    },
    ["cm3atm"] = {
	name1    = "centimetro cubo-atmosfera",
	name2    = "piedi cubi-atmosfera",
	symbol   = "cm³⋅atm",
	utype    = "energia",
	scale    = 0.101325,
	default  = "mJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["cufootatm"] = {
	name1    = "piede cubo di atmosfera",
	name2    = "piedi cubi di atmosfera",
	symbol   = "cu&nbsp;ft&nbsp;atm",
	utype    = "energia",
	scale    = 2869.2044809344,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["cufootnaturalgas"] = {
	name1    = "piede cubo di gas naturale",
	name2    = "piedi cubi di gas naturale",
	symbol   = "cuftnaturalgas",
	usename  = 1,
	utype    = "energia",
	scale    = 1055055.85262,
	default  = "MJ",
	link     = "Conversione delle unità di misura#Unità di energia/lavoro",
    },
    ["cuftatm"] = {
	name1    = "piede cubo di atmosfera",
	name2    = "piedi cubi di atmosfera",
	symbol   = "cu&nbsp;ft&nbsp;atm",
	utype    = "energia",
	scale    = 2869.2044809344,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["cuftnaturalgas"] = {
	name1    = "piede cubico di gas naturale",
	name2    = "piedi cubi di gas naturale",
	symbol   = "cuftnaturalgas",
	usename  = 1,
	utype    = "energia",
	scale    = 1055055.85262,
	default  = "MJ",
	link     = "Conversione delle unità di misura#Unità di energia/lavoro",
    },
    ["cuydatm"] = {
	name1    = "iarda cubica di atmosfera",
	name2    = "iarde cubiche di atmosfera",
	symbol   = "cu&nbsp;yd&nbsp;atm",
	utype    = "energia",
	scale    = 77468.5209852288,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["Eh"] = {
	name1    = "Hartree",
	symbol   = "''E''<sub>h</sub>",
	utype    = "energia",
	scale    = 4.35974417e-18,
	default  = "eV",
	link     = "Energia di Hartree",
    },
    ["erg"] = {
	symbol   = "erg",
	utype    = "energia",
	scale    = 0.0000001,
	default  = "μJ",
	link     = "Erg (unità di misura)|Erg",
    },
    ["eV"] = {
	name1    = "elettronvolt",
	symbol   = "eV",
	utype    = "energia",
	scale    = 1.602176487e-19,
	default  = "aJ",
    },
    ["feV"] = {
	name1    = "femtoelettronvolt",
	symbol   = "feV",
	utype    = "energia",
	scale    = 1.602176487e-34,
	default  = "yJ",
	link     = "Elettronvolt",
    },
    ["foe"] = {
	symbol   = "foe",
	utype    = "energia",
	scale    = 1e44,
	default  = "YJ",
	link     = "Foe (unità di misura)",
    },
    ["ftlb"] = {
	name1    = "foot-pound",
	symbol   = "ft⋅lb",
	utype    = "energia",
	alttype  = "momento meccanico",
	scale    = 1.3558179483314004,
	default  = "J",
	link     = "Piede per libbra",
    },
    ["ftlb-f"] = {
	name1    = "foot-pound force",
	name2    = "foot-pounds force",
	symbol   = "ft⋅lb<sub>f</sub>",
	utype    = "energia",
	alttype  = "momento meccanico",
	scale    = 1.3558179483314004,
	default  = "J",
	link     = "Piede per libbra",
    },
    ["ftlbf"] = {
	name1    = "foot-pound force",
	name2    = "foot-pounds force",
	symbol   = "ft⋅lbf",
	utype    = "energia",
	alttype  = "momento meccanico",
	scale    = 1.3558179483314004,
	default  = "J",
	link     = "Piede per libbra",
    },
    ["ftpdl"] = {
	name1    = "foot-poundal",
	symbol   = "ft⋅pdl",
	utype    = "energia",
	scale    = 0.0421401100938048,
	default  = "J",
	link     = "Conversione delle unità di misura#Unità di energia/lavoro",
    },
    ["GeV"] = {
	name1    = "gigaelettronvolt",
	symbol   = "GeV",
	utype    = "energia",
	scale    = 1.602176487e-10,
	default  = "nJ",
	link     = "Elettronvolt",
    },
    ["GLatm"] = {
	name1    = "gigalitro-atmosfera",
	symbol   = "GL⋅atm",
	utype    = "energia",
	scale    = 101325000000,
	default  = "GJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["Glatm"] = {
	name1    = "gigalitro-atmosfera",
	symbol   = "Gl⋅atm",
	utype    = "energia",
	scale    = 101325000000,
	default  = "GJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["gTNT"] = {
	name1    = "grammo di TNT",
	name2    = "grammi di TNT",
	symbol   = "gram of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4184,
	default  = "kJ",
	link     = "Equivalente in TNT",
    },
    ["Gtoe"] = {
	name1    = "gigatonnellata equivalente di petrolio",
	name2    = "gigatonnellate equivalenti di petrolio",
	symbol   = "Gtoe",
	utype    = "energia",
	scale    = 4.1868e19,
	default  = "EJ",
	link     = "Tonnellata equivalente di petrolio",
    },
    ["GtonTNT"] = {
	name1    = "gigatonnellata equivalente in TNT",
	name2    = "gigatonnellate equivalenti in TNT",
	symbol   = "gigaton of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4.184e18,
	default  = "EJ",
	link     = "Equivalente in TNT",
    },
    ["GtTNT"] = {
	name1    = "gigatonnellata equivalente in TNT",
	name2    = "gigatonnellate equivalenti in TNT",
	symbol   = "gigatonne of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4.184e18,
	default  = "EJ",
	link     = "Equivalente in TNT",
    },
    ["GW.h"] = {
	name1    = "gigawattora",
	symbol   = "GW⋅h",
	utype    = "energia",
	scale    = 3.6e12,
	default  = "TJ",
	link     = "wattora",
    },
    ["GWh"] = {
	name1    = "gigawattora",
	symbol   = "GWh",
	utype    = "energia",
	scale    = 3.6e12,
	default  = "TJ",
	link     = "wattora",
    },
    ["hph"] = {
	name1    = "cavallo vapore per ora",
	name2    = "cavalli vapore per ora",
	symbol   = "hp⋅h",
	utype    = "energia",
	scale    = 2684519.537696172792,
	default  = "kWh",
	link     = "Cavallo vapore",
    },
    ["impgalatm"] = {
	name1    = "gallone imperiale-atmosfera",
	name2    = "galloni imperiali-atmosfere",
	symbol   = "imp gal⋅atm",
	utype    = "energia",
	scale    = 460.63256925,
	default  = "J",
	link     = "Atmosfera (unità di misura)",
    },
    ["inlb"] = {
	name1    = "pollice per libbra",
	name2    = "pollici per libbre",
	symbol   = "in⋅lb",
	utype    = "energia",
	alttype  = "momento meccanico",
	scale    = 0.1129848290276167,
	default  = "mJ",
	link     = "Piede per libbra",
    },
    ["inlbf"] = {
	name1    = "forza pollice per libbra",
	name2    = "forza pollici per libbre",
	symbol   = "in⋅lb<sub>f</sub>",
	utype    = "energia",
	alttype  = "momento meccanico",
	scale    = 0.1129848290276167,
	default  = "mJ",
	link     = "Piede per libbra",
    },
    ["inozf"] = {
	name1    = "forza pollice per oncia",
	name2    = "forza pollici per once",
	symbol   = "in⋅oz<sub>f</sub>",
	utype    = "energia",
	alttype  = "momento meccanico",
	scale    = 0.00706155181422604375,
	default  = "mJ",
	link     = "Piede per libbra",
    },
    ["J"] = {
	_name1   = "joule",
	_symbol  = "J",
	utype    = "energia",
	scale    = 1,
	prefixes = 1,
	default  = "cal",
	link     = "Joule",
    },
    ["kBOE"] = {
	name1    = "chilobarile equivalente di petrolio",
	name2    = "chilobarili equivalenti di petrolio",
	symbol   = "kBOE",
	utype    = "energia",
	scale    = 6.1178632e12,
	default  = "TJ",
	link     = "Barile equivalente di petrolio",
    },
    ["kcal"] = {
	name1    = "chilocaloria",
	name2    = "chilocalorie",
	symbol   = "kcal",
	utype    = "energia",
	scale    = 4184,
	default  = "kJ",
	link     = "Caloria",
    },
    ["kcal-15"] = {
	name1    = "chilocaloria (15 °C)",
	name2    = "chilocalorie (15 °C)",
	symbol   = "kcal<sub>15</sub>",
	utype    = "energia",
	scale    = 4185.8,
	default  = "kJ",
	link     = "Caloria",
    },
    ["kcal-IT"] = {
	name1    = "chilocaloria (International Steam Table)",
	name2    = "chilocalorie (International Steam Table)",
	symbol   = "kcal<sub>IT</sub>",
	utype    = "energia",
	scale    = 4186.8,
	default  = "kJ",
	link     = "Caloria",
    },
    ["kcal-th"] = {
	name1    = "chilocaloria (termochimica)",
	name2    = "chilocalorie (thermochemica)",
	symbol   = "kcal<sub>th</sub>",
	utype    = "energia",
	scale    = 4184,
	default  = "kJ",
	link     = "Caloria",
    },
    ["kerg"] = {
	name1    = "kiloerg",
	symbol   = "kerg",
	utype    = "energia",
	scale    = 0.0001,
	default  = "mJ",
	link     = "Erg (unità di misura)|Erg",
    },
    ["keV"] = {
	name1    = "kiloelettronvolt",
	symbol   = "keV",
	utype    = "energia",
	scale    = 1.602176487e-16,
	default  = "fJ",
	link     = "Elettronvolt",
    },
    ["kgTNT"] = {
	name1    = "chilogrammo equivalente in TNT",
	name2    = "chilogrammi equivalenti in TNT",
	symbol   = "kilogram of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4184000,
	default  = "MJ",
	link     = "Equivalente in TNT",
    },
    ["kLatm"] = {
	name1    = "chilolitro-atmosfera",
	name1_us = "chilolitri-atmosfera",
	symbol   = "kL⋅atm",
	utype    = "energia",
	scale    = 101325,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["kt(TNT)"] = {
	name1    = "chilotone",
	name2    = "chilotoni",
	symbol   = "kt",
	utype    = "energia",
	scale    = 4.184e12,
	default  = "TJ",
    },
    ["ktoe"] = {
	name1    = "chilotonnellata equivalente di petrolio",
	name2    = "chilotonnellate equivalenti di petrolio",
	symbol   = "ktoe",
	utype    = "energia",
	scale    = 4.1868e13,
	default  = "TJ",
	link     = "Tonnellata equivalente di petrolio",
    },
    ["ktonTNT"] = {
	name1    = "chilotone",
	name2    = "chilotoni",
	symbol   = "kt",
	utype    = "energia",
	scale    = 4.184e12,
	default  = "TJ",
    },
    ["ktTNT"] = {
	name1    = "chilotone",
	name2    = "chilotoni",
	symbol   = "kilotonne of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4.184e12,
	default  = "TJ",
    },
    ["kW.h"] = {
	name1    = "chilowattora",
	symbol   = "kW⋅h",
	utype    = "energia",
	scale    = 3600000,
	default  = "MJ",
	link     = "wattora",
    },
    ["kWh"] = {
	name1    = "chilowattora",
	symbol   = "kWh",
	utype    = "energia",
	scale    = 3600000,
	default  = "MJ",
	link     = "wattora",
    },
    ["Latm"] = {
	name1    = "litro per atmosfera",
	symbol   = "L⋅atm",
	utype    = "energia",
	scale    = 101.325,
	default  = "J",
	link     = "Atmosfera (unità di misura)",
    },
    ["m3atm"] = {
	name1    = "metro cubo atmosfera",
	name1_us = "metri cubi atmosfera",
	symbol   = "m³⋅atm",
	utype    = "energia",
	scale    = 101325,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["MBtu"] = {
	name1    = "migliaia di British thermal units",
	symbol   = "MBtu",
	utype    = "energia",
	scale    = 1055055.85262,
	default  = "MJ",
	link     = "British thermal unit",
    },
    ["Mcal"] = {
	name1    = "megacaloria",
	name2    = "megacalorie",
	symbol   = "Mcal",
	utype    = "energia",
	scale    = 4184000,
	default  = "MJ",
	link     = "Caloria",
    },
    ["mcal"] = {
	name1    = "millicaloria",
	name2    = "millicalorie",
	symbol   = "mcal",
	utype    = "energia",
	scale    = 0.004184,
	default  = "mJ",
	link     = "Caloria",
    },
    ["Mcal-15"] = {
	name1    = "megacaloria (15 °C)",
	name2    = "megacalorie (15 °C)",
	symbol   = "Mcal<sub>15</sub>",
	utype    = "energia",
	scale    = 4185800,
	default  = "MJ",
	link     = "Caloria",
    },
    ["mcal-15"] = {
	name1    = "millicaloria (15 °C)",
	name2    = "millicalorie (15 °C)",
	symbol   = "mcal<sub>15</sub>",
	utype    = "energia",
	scale    = 0.0041858,
	default  = "mJ",
	link     = "Caloria",
    },
    ["Mcal-IT"] = {
	name1    = "megacaloria (International Steam Table)",
	name2    = "megacalorie (International Steam Table)",
	symbol   = "Mcal<sub>IT</sub>",
	utype    = "energia",
	scale    = 4186800,
	default  = "MJ",
	link     = "Caloria",
    },
    ["mcal-IT"] = {
	name1    = "millicaloria (International Steam Table)",
	name2    = "millicalorie (International Steam Table)",
	symbol   = "mcal<sub>IT</sub>",
	utype    = "energia",
	scale    = 0.0041868,
	default  = "mJ",
	link     = "Caloria",
    },
    ["Mcal-th"] = {
	name1    = "megacaloria (termochimica)",
	name2    = "megacalorie (termochimica)",
	symbol   = "Mcal<sub>th</sub>",
	utype    = "energia",
	scale    = 4184000,
	default  = "MJ",
	link     = "Caloria",
    },
    ["mcal-th"] = {
	name1    = "millicaloria (termochimica)",
	name2    = "millicalorie (termochimica)",
	symbol   = "mcal<sub>th</sub>",
	utype    = "energia",
	scale    = 0.004184,
	default  = "mJ",
	link     = "Caloria",
    },
    ["Merg"] = {
	name1    = "megaerg",
	symbol   = "Merg",
	utype    = "energia",
	scale    = 0.1,
	default  = "J",
	link     = "Erg (unità di misura)|Erg",
    },
    ["merg"] = {
	name1    = "millierg",
	symbol   = "merg",
	utype    = "energia",
	scale    = 0.0000000001,
	default  = "μJ",
	link     = "Erg (unità di misura)|Erg",
    },
    ["MeV"] = {
	name1    = "megaelettronvolt",
	symbol   = "MeV",
	utype    = "energia",
	scale    = 1.602176487e-13,
	default  = "pJ",
	link     = "Elettronvolt",
    },
    ["meV"] = {
	name1    = "millielettronvolt",
	symbol   = "meV",
	utype    = "energia",
	scale    = 1.602176487e-22,
	default  = "zJ",
	link     = "Elettronvolt",
    },
    ["MLatm"] = {
	name1    = "megalitro-atmosfera",
	name2    = "megalitri-atmosfera",
	symbol   = "ML⋅atm",
	utype    = "energia",
	scale    = 101325000,
	default  = "MJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["Mlatm"] = {
	name1    = "megalitro-atmosfera",
	name2    = "megalitri-atmosfera",
	symbol   = "Ml⋅atm",
	utype    = "energia",
	scale    = 101325000,
	default  = "MJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["mLatm"] = {
	name1    = "millilitro-atmosfera",
	name2    = "megalitri-atmosfera",
	symbol   = "L⋅atm",
	utype    = "energia",
	scale    = 0.101325,
	default  = "mJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["mlatm"] = {
	name1    = "millilitro-atmospfera",
	name2    = "megalitri-atmosfera",
	symbol   = "l⋅atm",
	utype    = "energia",
	scale    = 0.101325,
	default  = "mJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["MMBtu"] = {
	name1    = "milione di British thermal units",
	name2    = "milioni di British thermal units",
	symbol   = "MMBtu",
	utype    = "energia",
	scale    = 1055055852.62,
	default  = "GJ",
	link     = "British thermal unit",
    },
    ["Mt(TNT)"] = {
	name1    = "megatone",
	name2    = "megatoni",
	symbol   = "Mt",
	utype    = "energia",
	scale    = 4.184e15,
	default  = "PJ",
	link     = "Equivalente in TNT",
    },
    ["Mtoe"] = {
	name1    = "megatonnellata equivalente di petrolio",
	name2    = "megatonnellate equivalenti di petrolio",
	symbol   = "Mtoe",
	utype    = "energia",
	scale    = 4.1868e16,
	default  = "PJ",
	link     = "Tonnellata equivalente di petrolio",
    },
    ["MtonTNT"] = {
	name1    = "megatone",
	name2    = "megatoni",
	symbol   = "Mt",
	utype    = "energia",
	scale    = 4.184e15,
	default  = "PJ",
	link     = "Equivalente in TNT",
    },
    ["mtonTNT"] = {
	name1    = "millitonnellata equivalente in TNT",
	name2    = "millitonnellate equivalente in TNT",
	symbol   = "milliton of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4184000,
	default  = "MJ",
	link     = "Equivalente in TNT",
    },
    ["MtTNT"] = {
	name1    = "megatone",
	name2    = "megatoni",
	symbol   = "megatonne of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4.184e15,
	default  = "PJ",
	link     = "Equivalente in TNT",
    },
    ["mtTNT"] = {
	name1    = "millitonnellata equivalente in TNT",
	name2    = "millitonnellate equivalenti in TNT",
	symbol   = "millitonne of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4184000,
	default  = "MJ",
	link     = "Equivalente in TNT",
    },
    ["MW.h"] = {
	name1    = "megawattora",
	symbol   = "MW⋅h",
	utype    = "energia",
	scale    = 3600000000,
	default  = "GJ",
	link     = "wattora",
    },
    ["mW.h"] = {
	name1    = "milliwattora",
	symbol   = "mW⋅h",
	utype    = "energia",
	scale    = 3.6,
	default  = "J",
	link     = "wattora",
    },
    ["MWh"] = {
	name1    = "megawattora",
	symbol   = "MWh",
	utype    = "energia",
	scale    = 3600000000,
	default  = "GJ",
	link     = "wattora",
    },
    ["mWh"] = {
	name1    = "milliwattora",
	symbol   = "mWh",
	utype    = "energia",
	scale    = 3.6,
	default  = "J",
	link     = "wattora",
    },
    ["neV"] = {
	name1    = "nanoelettronvolt",
	symbol   = "neV",
	utype    = "energia",
	scale    = 1.602176487e-28,
	default  = "yJ",
	link     = "Elettronvolt",
    },
    ["PeV"] = {
	name1    = "petaelettronvolt",
	symbol   = "PeV",
	utype    = "energia",
	scale    = 0.0001602176487,
	default  = "mJ",
	link     = "Elettronvolt",
    },
    ["peV"] = {
	name1    = "picoelettronvolt",
	symbol   = "peV",
	utype    = "energia",
	scale    = 1.602176487e-31,
	default  = "yJ",
	link     = "Elettronvolt",
    },
    ["PSh"] = {
	name1    = "Pferdestärkenstunde",
	symbol   = "PSh",
	utype    = "energia",
	scale    = 2647795.5,
	default  = "kWh",
    },
    ["quad"] = {
	name1    = "quadrillion British thermal units",
	symbol   = "quad",
	utype    = "energia",
	scale    = 1.054804e18,
	default  = "EJ",
	link     = "Quad (unità di misura)",
    },
    ["Ry"] = {
	name1    = "rydberg",
	symbol   = "Ry",
	utype    = "energia",
	scale    = 2.1798741e-18,
	default  = "eV",
	link     = "Costante di Rydberg",
    },
    ["scc"] = {
	name1    = "centimetro cubo standard",
	name2    = "centimetri cubi standard",
	symbol   = "scc",
	utype    = "energia",
	scale    = 0.101325,
	default  = "mJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["scf"] = {
	name1    = "piede cubo standard",
	name2    = "piedi cubi standard",
	symbol   = "scf",
	utype    = "energia",
	scale    = 2869.2044809344,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["scfoot"] = {
	name1    = "piede cubo standard",
	name2    = "piede cubi standard",
	symbol   = "scf",
	utype    = "energia",
	scale    = 2869.2044809344,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["scy"] = {
	name1    = "iarda cuba standard",
	name2    = "iarde cube standard",
	symbol   = "scy",
	utype    = "energia",
	scale    = 77468.5209852288,
	default  = "kJ",
	link     = "Atmosfera (unità di misura)",
    },
    ["sl"] = {
	name1    = "litro standard",
	name2    = "litri standard",
	symbol   = "sl",
	utype    = "energia",
	scale    = 101.325,
	default  = "J",
	link     = "Atmosfera (unità di misura)",
    },
    ["t(TNT)"] = {
	name1    = "tonnellata equivalente in TNT",
	name2    = "tonnellate equivalenti in TNT",
	symbol   = "t",
	utype    = "energia",
	scale    = 4184000000,
	default  = "GJ",
	link     = "Equivalente in TNT",
    },
    ["TeV"] = {
	name1    = "teraelettronvolt",
	symbol   = "TeV",
	utype    = "energia",
	scale    = 1.602176487e-7,
	default  = "μJ",
	link     = "Elettronvolt",
    },
    ["th"] = {
	name1    = "thermie",
	symbol   = "th",
	utype    = "energia",
	scale    = 4186800,
	default  = "MJ",
	link     = "Conversione delle unità di misura#Unità di energia/lavoro",
    },
    ["thm-EC"] = {
	name1    = "therm (EC)",
	symbol   = "thm (EC)",
	utype    = "energia",
	scale    = 105506000,
	default  = "MJ",
	link     = "Conversione delle unità di misura#Unità di energia/lavoro",
    },
    ["thm-UK"] = {
	name1    = "therm (UK)",
	symbol   = "thm (UK)",
	utype    = "energia",
	scale    = 105505585.257348,
	default  = "MJ",
	link     = "Conversione delle unità di misura#Unità di energia/lavoro",
    },
    ["thm-US"] = {
	name1    = "therm (US)",
	symbol   = "thm (US)",
	utype    = "energia",
	scale    = 105480400,
	default  = "MJ",
	link     = "Conversione delle unità di misura#Unità di energia/lavoro",
    },
    ["toe"] = {
	name1    = "tonnellata equivalente di petrolio",
	name2    = "tonnellate equivalenti di petrolio",
	symbol   = "toe",
	utype    = "energia",
	scale    = 41868000000,
	default  = "GJ",
    },
    ["tonTNT"] = {
	name1    = "tonnellata equivalente in TNT",
	name2    = "tonnellate equivalente in TNT",
	symbol   = "ton of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4184000000,
	default  = "GJ",
	link     = "Equivalente in TNT",
    },
    ["tTNT"] = {
	name1    = "tonnellata equivalente in TNT",
	name2    = "tonnellate equivalente in TNT",
	symbol   = "tonne of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4184000000,
	default  = "GJ",
	link     = "Equivalente in TNT",
    },
    ["TtonTNT"] = {
	name1    = "teratonnellata equivalente in TNT",
	name2    = "teratonnellate equivalente in TNT",
	symbol   = "teraton of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4.184e21,
	default  = "ZJ",
	link     = "Equivalente in TNT",
    },
    ["TtTNT"] = {
	name1    = "teratonnellata equivalente in TNT",
	name2    = "teratonnellate equivalente in TNT",
	symbol   = "teratonne of TNT",
	usename  = 1,
	utype    = "energia",
	scale    = 4.184e21,
	default  = "ZJ",
	link     = "Equivalente in TNT",
    },
    ["TW.h"] = {
	name1    = "terawattora",
	symbol   = "TW⋅h",
	utype    = "energia",
	scale    = 3.6e15,
	default  = "PJ",
	link     = "wattora",
    },
    ["TWh"] = {
	name1    = "terawattora",
	symbol   = "TWh",
	utype    = "energia",
	scale    = 3.6e15,
	default  = "PJ",
	link     = "wattora",
    },
    ["USgalatm"] = {
	name1    = "gallone US-atmosphere",
	symbol   = "US&nbsp;gal⋅atm",
	utype    = "energia",
	scale    = 383.5568490138,
	default  = "J",
	link     = "Atmosfera (unità di misura)",
    },
    ["W.h"] = {
	name1    = "wattora",
	symbol   = "W⋅h",
	utype    = "energia",
	scale    = 3600,
	default  = "kJ",
    },
    ["Wh"] = {
	name1    = "wattora",
	symbol   = "Wh",
	utype    = "energia",
	scale    = 3600,
	default  = "kJ",
    },
    ["μerg"] = {
	name1    = "microerg",
	symbol   = "μerg",
	utype    = "energia",
	scale    = 1e-13,
	default  = "nJ",
	link     = "Erg (unità di misura)|Erg",
    },
    ["μeV"] = {
	name1    = "microelettronvolt",
	symbol   = "μeV",
	utype    = "energia",
	scale    = 1.602176487e-25,
	default  = "yJ",
	link     = "Elettronvolt",
    },
    ["μW.h"] = {
	name1    = "microwattora",
	symbol   = "μW⋅h",
	utype    = "energia",
	scale    = 0.0036,
	default  = "mJ",
	link     = "Wattora",
    },
    ["μWh"] = {
	name1    = "microwattora",
	symbol   = "μWh",
	utype    = "energia",
	scale    = 0.0036,
	default  = "mJ",
	link     = "Wattora",
    },
    ["-kW.h"] = {
	target   = "kW.h",
    },
    ["caloria"] = {
	target   = "cal",
    },
    ["calorie"] = {
	target   = "cal",
    },
    ["btu"] = {
	target   = "BTU",
    },
    ["Calorie"] = {
	target   = "Cal",
    },
    ["ft.lbf"] = {
	target   = "ftlbf",
    },
    ["ft⋅lbf"] = {
	target   = "ftlbf",
    },
    ["g-cal-15"] = {
	target   = "cal-15",
    },
    ["g-cal-IT"] = {
	target   = "cal-IT",
    },
    ["g-cal-th"] = {
	target   = "cal-th",
    },
    ["g-kcal-15"] = {
	target   = "kcal-15",
    },
    ["g-kcal-IT"] = {
	target   = "kcal-IT",
    },
    ["g-kcal-th"] = {
	target   = "kcal-th",
    },
    ["g-Mcal-15"] = {
	target   = "Mcal-15",
    },
    ["g-mcal-15"] = {
	target   = "mcal-15",
    },
    ["g-Mcal-IT"] = {
	target   = "Mcal-IT",
    },
    ["g-mcal-IT"] = {
	target   = "mcal-IT",
    },
    ["g-Mcal-th"] = {
	target   = "Mcal-th",
    },
    ["g-mcal-th"] = {
	target   = "mcal-th",
    },
    ["GW-h"] = {
	target   = "GW.h",
    },
    ["GW⋅h"] = {
	target   = "GW.h",
    },
    ["Hartree"] = {
	target   = "Eh",
    },
    ["hp.h"] = {
	target   = "hph",
    },
    ["in.lb-f"] = {
	target   = "inlbf",
    },
    ["in.lbf"] = {
	target   = "inlbf",
    },
    ["in.oz-f"] = {
	target   = "inozf",
    },
    ["in.ozf"] = {
	target   = "inozf",
    },
    ["inoz-f"] = {
	target   = "inozf",
    },
    ["joule"] = {
	target   = "J",
    },
    ["kbboe"] = {
	target   = "kBOE",
	symbol   = "kbboe",
    },
    ["klatm"] = {
	target   = "kLatm",
	symbol   = "kl⋅atm",
    },
    ["kg-cal-15"] = {
	target   = "Cal-15",
    },
    ["kg-cal-IT"] = {
	target   = "Cal-IT",
    },
    ["kg-cal-th"] = {
	target   = "Cal-th",
    },
    ["latm"] = {
	target   = "Latm",
	symbol   = "l⋅atm",
    },
    ["kW-h"] = {
	target   = "kW.h",
    },
    ["kW⋅h"] = {
	target   = "kW.h",
    },
    ["MW-h"] = {
	target   = "MW.h",
    },
    ["mW-h"] = {
	target   = "mW.h",
    },
    ["TW-h"] = {
	target   = "TW.h",
    },
    ["U.S.galatm"] = {
	target   = "USgalatm",
    },
    ["uerg"] = {
	target   = "μerg",
    },
    ["ueV"] = {
	target   = "μeV",
    },
    ["usgalatm"] = {
	target   = "USgalatm",
    },
    ["uW-h"] = {
	target   = "μW.h",
    },
    ["uW.h"] = {
	target   = "μW.h",
    },
    ["uWh"] = {
	target   = "μWh",
    },
    ["W-h"] = {
	target   = "W.h",
    },
    ["wattora"] = {
	target   = "Wh",
    },
    ["| eVpar"] = {
	_name1   = "elettronvolt",
	_symbol  = "eV",
	utype    = "energia per quantità chimica",
	scale    = 96485.329522144166,
	prefixes = 1,
	default  = "kcal/mol",
	link     = "Elettronvolt",
    },
    ["kcal/mol"] = {
	per      = { "kcal", "mol" },
	utype    = "energia per quantità chimica",
	default  = "kJ/mol",
	link     = "Chilocalorie per mole",
    },
    ["kJ/mol"] = {
	per      = { "kJ", "mol" },
	utype    = "energia per quantità chimica",
	default  = "kcal/mol",
	link     = "Joule per mole",
    },
    ["kWh/100 km"] = {
	name1    = "chilowattora per 100 chilometri",
	symbol   = "kW⋅h/100&nbsp;km",
	utype    = "energia per unità di lunghezza",
	scale    = 36,
	default  = "MJ/km kWh/mi",
	link     = "wattora",
    },
    ["kWh/100 mi"] = {
	name1    = "chilowattora per 100 miglia",
	symbol   = "kW⋅h/100&nbsp;mi",
	utype    = "energia per unità di lunghezza",
	scale    = 22.3694,
	default  = "mpge",
    },
    ["MJ/100 km"] = {
	name1    = "megajoule per 100 chilometri",
	symbol   = "MJ/100&nbsp;km",
	utype    = "energia per unità di lunghezza",
	scale    = 10,
	default  = "BTU/mi",
	link     = "British thermal unit",
    },
    ["mpge"] = {
	name1    = "miglio per gallone equivalente di benzina",
	name2    = "miglia per gallone equivalente di benzina",
	symbol   = "mpg&#8209;e",
	utype    = "energia per unità di lunghezza",
	scale    = 13e-6,
	invert   = -1,
	iscomplex= true,
	default  = "kWh/100 mi",
    },
    ["BTU/mi"] = {
	per      = { "BTU", "mi" },
	utype    = "energia per unità di lunghezza",
	default  = "v > 1525 ! M ! k ! J/km",
    },
    ["kJ/km"] = {
	per      = { "kJ", "km" },
	utype    = "energia per unità di lunghezza",
	default  = "BTU/mi",
    },
    ["kWh/km"] = {
	per      = { "-kW.h", "km" },
	utype    = "energia per unità di lunghezza",
	default  = "MJ/km kWh/mi",
    },
    ["kWh/mi"] = {
	per      = { "-kW.h", "mi" },
	utype    = "energia per unità di lunghezza",
	default  = "kWh/km MJ/km",
    },
    ["MJ/km"] = {
	per      = { "MJ", "km" },
	utype    = "energia per unità di lunghezza",
	default  = "BTU/mi",
    },
    ["mpg-e"] = {
	target   = "mpge",
    },
    ["BTU/lb"] = {
	name1    = "British thermal unit per libbra",
	symbol   = "BTU/lb",
	utype    = "energia per unità di massa",
	scale    = 429.92261414790346,
	default  = "kJ/kg",
	link     = "British thermal unit",
    },
    ["cal/g"] = {
	name1    = "caloria per grammo",
	name2    = "calorie per grammo",
	symbol   = "cal/g",
	utype    = "energia per unità di massa",
	scale    = 4184,
	default  = "J/g",
	link     = "Caloria",
    },
    ["GJ/kg"] = {
	name1    = "gigajoule per chilogrammo",
	symbol   = "GJ/kg",
	utype    = "energia per unità di massa",
	scale    = 1e9,
	default  = "ktTNT/t",
	link     = "Joule",
    },
    ["J/g"] = {
	name1    = "joule per grammo",
	symbol   = "J/g",
	utype    = "energia per unità di massa",
	scale    = 1000,
	default  = "kcal/g",
	link     = "Joule",
    },
    ["kcal/g"] = {
	name1    = "chilocaloria per grammo",
	name2    = "chilocalorie per grammo",
	symbol   = "kcal/g",
	utype    = "energia per unità di massa",
	scale    = 4184000,
	default  = "kJ/g",
	link     = "Caloria",
    },
    ["kJ/g"] = {
	name1    = "kilojoule per grammmo",
	symbol   = "kJ/g",
	utype    = "energia per unità di massa",
	scale    = 1000000,
	default  = "kcal/g",
	link     = "Joule",
    },
    ["kJ/kg"] = {
	name1    = "kilojoule per chilogrammo",
	symbol   = "kJ/kg",
	utype    = "energia per unità di massa",
	scale    = 1000,
	default  = "BTU/lb",
	link     = "Joule",
    },
    ["ktonTNT/MT"] = {
	name1    = "chilotonnellata equivalente in TNT per tonnellata",
	name2    = "chilotonnellate equivalenti in TNT per tonnellata",
	symbol   = "kiloton of TNT per metric ton",
	usename  = 1,
	utype    = "energia per unità di massa",
	scale    = 4184000000,
	default  = "GJ/kg",
	link     = "Equivalente in TNT",
    },
    ["ktTNT/t"] = {
	name1    = "chilotonnellata equivalente in TNT per tonnellata",
	name2    = "chilotonnellate equivalenti in TNT per tonnellata",
	symbol   = "kilotonne of TNT per tonne",
	usename  = 1,
	utype    = "energia per unità di massa",
	scale    = 4184000000,
	default  = "GJ/kg",
	link     = "Equivalente in TNT",
    },
    ["MtonTNT/MT"] = {
	name1    = "megatonnellata equivalente in TNT per tonnellata",
	name2    = "megatonnellate equivalenti in TNT",
	symbol   = "megaton of TNT per metric ton",
	usename  = 1,
	utype    = "energia per unità di massa",
	scale    = 4.184e12,
	default  = "TJ/kg",
	link     = "Equivalente in TNT",
    },
    ["MtTNT/MT"] = {
	name1    = "megatonnellata equivalente in TNT per tonnellata",
	name2    = "megatonnellate equivalenti in TNT",
	symbol   = "megatonne of TNT per tonne",
	usename  = 1,
	utype    = "energia per unità di massa",
	scale    = 4.184e12,
	default  = "TJ/kg",
	link     = "Equivalente in TNT",
    },
    ["TJ/kg"] = {
	name1    = "terajoule per chilogrammo",
	symbol   = "TJ/kg",
	utype    = "energia per unità di massa",
	scale    = 1e12,
	default  = "MtTNT/MT",
	link     = "Joule",
    },
    ["Cal/g"] = {
	per      = { "Cal", "g" },
	utype    = "energia per unità di massa",
	default  = "kJ/g",
    },
    ["BTU/cuft"] = {
	per      = { "BTU", "cuft" },
	utype    = "energia per unità di volume",
	default  = "kJ/L",
    },
    ["Cal/12USoz(mL)serve"] = {
	per      = { "Cal", "-12USoz(mL)serve" },
	utype    = "energia per unità di volume",
	default  = "kJ/L",
    },
    ["Cal/12USoz(ml)serve"] = {
	per      = { "Cal", "-12USoz(ml)serve" },
	utype    = "energia per unità di volume",
	default  = "kJ/l",
    },
    ["Cal/12USozserve"] = {
	per      = { "Cal", "-12USozserve" },
	utype    = "energia per unità di volume",
	default  = "kJ/L",
    },
    ["Cal/USoz"] = {
	per      = { "Cal", "USoz" },
	utype    = "energia per unità di volume",
	default  = "kJ/ml",
    },
    ["kJ/L"] = {
	per      = { "kJ", "L" },
	utype    = "energia per unità di volume",
	default  = "BTU/cuft",
    },
    ["kJ/l"] = {
	per      = { "kJ", "l" },
	utype    = "energia per unità di volume",
	default  = "BTU/cuft",
    },
    ["kJ/ml"] = {
	per      = { "kJ", "ml" },
	utype    = "energia per unità di volume",
	default  = "Cal/USoz",
    },
    ["MJ/m3"] = {
	per      = { "MJ", "m3" },
	utype    = "energia per unità di volume",
	default  = "BTU/cuft",
    },
    ["cuft/a"] = {
	name1    = "piede cubo all'anno",
	name2    = "piedi cubi all'anno",
	symbol   = "cu&nbsp;ft/a",
	utype    = "flusso",
	scale    = 8.9730672142368242e-10,
	default  = "m3/a",
    },
    ["cuft/d"] = {
	name1    = "piede cubo al giorno",
	name2    = "piedi cubi al giorno",
	symbol   = "cu&nbsp;ft/d",
	utype    = "flusso",
	scale    = 3.2774128000000003e-7,
	default  = "m3/d",
    },
    ["cuft/h"] = {
	name1    = "piede cubo all'ora",
	name2    = "piedi cubi all'ora",
	symbol   = "cu&nbsp;ft/h",
	utype    = "flusso",
	scale    = 7.8657907200000004e-6,
	default  = "m3/h",
    },
    ["cuft/min"] = {
	name1    = "piede cubo al minuto",
	name2    = "piedi cubi al minuto",
	symbol   = "cu&nbsp;ft/min",
	utype    = "flusso",
	scale    = 0.00047194744319999999,
	default  = "m3/min",
    },
    ["cuft/s"] = {
	name1    = "piede cubo al secondo",
	name2    = "piedi cubi al secondo",
	symbol   = "cu&nbsp;ft/s",
	utype    = "flusso",
	scale    = 28316846592e-12,
	default  = "m3/s",
    },
    ["cumi/a"] = {
	name1    = "miglio cubo all'anno",
	name2    = "miglia cube all'anno",
	symbol   = "cu&nbsp;mi/a",
	utype    = "flusso",
	scale    = 132.08171170940057,
	default  = "km3/a",
    },
    ["cuyd/h"] = {
	name1    = "iarda cuba all'ora",
	name2    = "iarde cube all'ora",
	symbol   = "cuyd/h",
	utype    = "flusso",
	scale    = 0.00021237634944000001,
	default  = "m3/h",
	link     = "Piede cubo",
    },
    ["cuyd/s"] = {
	name1    = "iarda cuba al secondo",
	name2    = "iarde cube al secondo",
	symbol   = "cu&nbsp;yd/s",
	utype    = "flusso",
	scale    = 0.76455485798400002,
	default  = "m3/s",
	link     = "Piede cubo",
    },
    ["Goilbbl/a"] = {
	name1    = "bilione di barili all'anno",
	symbol   = "Gbbl/a",
	utype    = "flusso",
	scale    = 5.0380033629933836,
	default  = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3/a",
	link     = "Barile (unità di misura)",
    },
    ["impgal/h"] = {
	name1    = "gallone imperiale all'ora",
	name2    = "galloni imperiali all'ora",
	symbol   = "imp&nbsp;gal/h",
	utype    = "flusso",
	scale    = 1.2628027777777779e-6,
	default  = "m3/h",
	link     = "Gallone",
    },
    ["impgal/min"] = {
	name1    = "gallone imperiale al minuto",
	name2    = "galloni imperiali al minuto",
	symbol   = "imp gal/min",
	utype    = "flusso",
	scale    = 7.5768166666666671e-5,
	default  = "m3/s",
	link     = "Gallone",
    },
    ["impgal/s"] = {
	name1    = "gallone imperiale al secondo",
	name2    = "galloni imperiali al secondo",
	symbol   = "impgal/s",
	utype    = "flusso",
	scale    = 0.00454609,
	default  = "m3/s",
	link     = "Gallone",
    },
    ["km3/a"] = {
	name1    = "chilometro cubo all'anno",
	name2    = "chilometri cubi all'anno",
	symbol   = "km³/a",
	utype    = "flusso",
	scale    = 31.68808781402895,
	default  = "cumi/a",
	link     = "Metro cubo al secondo",
    },
    ["km3/d"] = {
	name1    = "chilometro cubo al giorno",
	name2    = "chilometri cubi al giorno",
	symbol   = "km³/d",
	utype    = "flusso",
	scale    = 11574.074074074075,
	default  = "cuft/d",
	link     = "Metro cubo al secondo",
    },
    ["koilbbl/a"] = {
	name1    = "migliaio di barili all'anno",
	name2    = "migliaia di barili all'anno",
	symbol   = "kbbl/a",
	utype    = "flusso",
	scale    = 5.0380033629933841e-6,
	default  = "v * 1.58987294928 < 10 ! ! e3 ! m3/a",
	link     = "Barile (unità di misura)",
    },
    ["koilbbl/d"] = {
	name1    = "migliaio di barili al giorno",
	name2    = "migliaia di barili al giorno",
	symbol   = "kbbl/d",
	utype    = "flusso",
	scale    = 0.0018401307283333335,
	default  = "v * 1.58987294928 < 10 ! ! e3 ! m3/d",
	link     = "Barile (unità di misura)",
    },
    ["L/h"] = {
	name1    = "litro all'ora",
	name2    = "litri per ora",
	symbol   = "L/h",
	utype    = "flusso",
	scale    = 2.7777777777777776e-7,
	default  = "impgal/h USgal/h",
	link     = "Metro cubo al secondo",
    },
    ["L/min"] = {
	name1    = "litro al minuto",
	name2    = "litri al minuto",
	symbol   = "L/min",
	utype    = "flusso",
	scale    = 1.6666666666666667e-5,
	default  = "impgal/min USgal/min",
	link     = "Metro cubo al secondo",
    },
    ["L/s"] = {
	name1    = "litro al secondo",
	name2    = "litri al secondo",
	symbol   = "L/s",
	utype    = "flusso",
	scale    = 0.001,
	default  = "cuft/s",
	link     = "Metro cubo al secondo",
    },
    ["m3/a"] = {
	name1    = "metro cubo all'anno",
	name2    = "metri cubi all'anno",
	symbol   = "m³/a",
	utype    = "flusso",
	scale    = 3.1688087814028947e-8,
	default  = "cuft/a",
	link     = "Metro cubo al secondo",
    },
    ["m3/d"] = {
	name1    = "metro cubo al giorno",
	name2    = "metri cubi al giorno",
	symbol   = "m³/d",
	utype    = "flusso",
	scale    = 1.1574074074074073e-5,
	default  = "cuft/d",
	link     = "Metro cubo al secondo",
    },
    ["m3/h"] = {
	name1    = "metro cubo all'ora",
	name1_us = "cubic meter per hour",
	name2    = "metri cubi all'ora",
	name2_us = "cubic meters per hour",
	symbol   = "m³/h",
	utype    = "flusso",
	scale    = 0.00027777777777777778,
	default  = "cuft/h",
	link     = "Metro cubo al secondo",
    },
    ["m3/min"] = {
	name1    = "metro cubo al minuto",
	name1_us = "cubic meter per minute",
	name2    = "metri cubi al minuto",
	name2_us = "cubic meters per minute",
	symbol   = "m³/min",
	utype    = "flusso",
	scale    = 0.016666666666666666,
	default  = "cuft/min",
	link     = "Metro cubo al secondo",
    },
    ["m3/s"] = {
	name1    = "metro cubo al secondo",
	name2    = "metri cubi al secondo",
	symbol   = "m³/s",
	utype    = "flusso",
	scale    = 1,
	default  = "cuft/s",
    },
    ["Moilbbl/a"] = {
	name1    = "milione di barili all'anno",
	name2    = "milioni di barili all'anno",
	symbol   = "Mbbl/a",
	utype    = "flusso",
	scale    = 0.0050380033629933837,
	default  = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/a",
	link     = "Barile (unità di misura)",
    },
    ["Moilbbl/d"] = {
	name1    = "milione di barili al giorno",
	name2    = "milioni di barili al giorno",
	symbol   = "Mbbl/d",
	utype    = "flusso",
	scale    = 1.8401307283333335,
	default  = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/d",
	link     = "Barile (unità di misura)",
    },
    ["oilbbl/a"] = {
	name1    = "barile all'anno",
	name2    = "barili all'anno",
	symbol   = "bbl/a",
	utype    = "flusso",
	scale    = 5.0380033629933841e-9,
	default  = "m3/a",
	link     = "Barile (unità di misura)",
    },
    ["oilbbl/d"] = {
	name1    = "barile al giorno",
	name2    = "barili al giorno",
	symbol   = "bbl/d",
	utype    = "flusso",
	scale    = 1.8401307283333336e-6,
	default  = "m3/d",
	link     = "Barile (unità di misura)",
    },
    ["Toilbbl/a"] = {
	name1    = "trilione di barili all'anno",
	name2    = "trilioni di barili all'anno",
	symbol   = "Tbbl/a",
	utype    = "flusso",
	scale    = 5038.0033629933832,
	default  = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3/a",
	link     = "Barile (unità di misura)",
    },
    ["USgal/a"] = {
	name1    = "gallone americano all'anno",
	name2    = "galloni americani all'anno",
	symbol   = "US&nbsp;gal/a",
	utype    = "flusso",
	scale    = 1.1995246102365199e-10,
	default  = "m3/s",
	link     = "Gallone",
    },
    ["USgal/d"] = {
	name1    = "gallone americano al giorno",
	name2    = "galloni americani al giorno",
	symbol   = "US&nbsp;gal/d",
	utype    = "flusso",
	scale    = 4.3812636388888893e-8,
	default  = "m3/s",
	link     = "Gallone",
    },
    ["USgal/h"] = {
	name1    = "gallone all'ora",
	name2    = "galloni all'ora",
	symbol   = "gal/h",
	utype    = "flusso",
	scale    = 1.0515032733333334e-6,
	default  = "m3/h",
	link     = "Gallone",
	customary= 1,
    },
    ["USgal/min"] = {
	name1    = "gallone americano al minuto",
	name2    = "galloni americani al minuto",
	symbol   = "US&nbsp;gal/min",
	utype    = "flusso",
	scale    = 6.3090196400000003e-5,
	default  = "m3/s",
	link     = "Gallone",
    },
    ["USgal/s"] = {
	name1    = "gallone americano al secondo",
	name2    = "galloni americani al secondo",
	symbol   = "USgal/s",
	utype    = "flusso",
	scale    = 0.003785411784,
	default  = "m3/s",
	link     = "Gallone",
    },
    ["ft3/a"] = {
	target   = "cuft/a",
    },
    ["ft3/d"] = {
	target   = "cuft/d",
    },
    ["ft3/h"] = {
	target   = "cuft/h",
    },
    ["ft3/s"] = {
	target   = "cuft/s",
    },
    ["Gcuft/a"] = {
	target   = "e9cuft/a",
    },
    ["Gcuft/d"] = {
	target   = "e9cuft/d",
    },
    ["kcuft/a"] = {
	target   = "e3cuft/a",
    },
    ["kcuft/d"] = {
	target   = "e3cuft/d",
    },
    ["kcuft/s"] = {
	target   = "e3cuft/s",
    },
    ["Mcuft/a"] = {
	target   = "e6cuft/a",
    },
    ["Mcuft/d"] = {
	target   = "e6cuft/d",
    },
    ["Mcuft/s"] = {
	target   = "e6cuft/s",
    },
    ["m³/s"] = {
	target   = "m3/s",
    },
    ["Tcuft/a"] = {
	target   = "e12cuft/a",
    },
    ["Tcuft/d"] = {
	target   = "e12cuft/d",
    },
    ["u.s.gal/min"] = {
	target   = "USgal/min",
    },
    ["usgal/min"] = {
	target   = "USgal/min",
    },
    ["U.S.gal/d"] = {
	target   = "USgal/d",
    },
    ["U.S.gal/h"] = {
	target   = "USgal/h",
    },
    ["U.S.gal/min"] = {
	target   = "USgal/min",
    },
    ["-LTf"] = {
	name1    = "long ton forza",
	symbol   = "LTf",
	utype    = "forza",
	scale    = 9964.01641818352,
	default  = "kN",
	link     = "Ton (unità di misura)#Long ton",
    },
    ["-STf"] = {
	name1    = "short ton forza",
	symbol   = "STf",
	utype    = "forza",
	scale    = 8896.443230521,
	default  = "kN",
	link     = "Ton (unità di misura)#Short ton",
    },
    ["dyn"] = {
	name1    = "dyne",
	symbol   = "dyn",
	utype    = "forza",
	scale    = 0.00001,
	default  = "gr-f",
    },
    ["g-f"] = {
	name1    = "grammo forza",
	name2    = "grammi forza",
	symbol   = "g<sub>f</sub>",
	utype    = "forza",
	scale    = 0.00980665,
	default  = "mN",
	link     = "Chilogrammo forza",
    },
    ["gf"] = {
	name1    = "grammo forza",
	name2    = "grammi forza",
	symbol   = "gf",
	utype    = "forza",
	scale    = 0.00980665,
	default  = "mN ozf",
	link     = "Chilogrammo forza",
    },
    ["gr-f"] = {
	name1    = "grano forza",
	name2    = "grani forza",
	symbol   = "gr<sub>f</sub>",
	utype    = "forza",
	scale    = 0.0006354602307515,
	default  = "μN",
	link     = "Libbra forza",
    },
    ["grf"] = {
	name1    = "grano forza",
	name2    = "grani forza",
	symbol   = "grf",
	utype    = "forza",
	scale    = 0.0006354602307515,
	default  = "μN",
	link     = "Libbra forza",
    },
    ["kdyn"] = {
	name1    = "chilodyne",
	symbol   = "kdyn",
	utype    = "forza",
	scale    = 0.01,
	default  = "oz-f",
	link     = "Dyne",
    },
    ["kg-f"] = {
	name1    = "chilogrammo forza",
	name2    = "chilogrammi forza",
	symbol   = "kg<sub>f</sub>",
	utype    = "forza",
	scale    = 9.80665,
	default  = "N",
    },
    ["kgf"] = {
	name1    = "chilogrammo forza",
	name2    = "chilogrammi forza",
	symbol   = "kgf",
	utype    = "forza",
	scale    = 9.80665,
	default  = "N",
    },
    ["kp"] = {
	name1    = "kilopond",
	symbol   = "kp",
	utype    = "forza",
	scale    = 9.80665,
	default  = "N lb-f",
	link     = "Chilogrammo forza",
    },
    ["lbf"] = {
	name1    = "libbra forza",
	name2    = "libbre forza",
	symbol   = "lb<sub>f</sub>",
	utype    = "forza",
	scale    = 4.4482216152605,
	default  = "N",
    },
    ["LTf"] = {
	name1    = "long ton-forza",
	symbol   = "LTf",
	usename  = 1,
	utype    = "forza",
	scale    = 9964.01641818352,
	default  = "kN",
	link     = "Ton (unità di misura)#Unità di forza",
    },
    ["LT-f"] = {
	name1    = "long ton-forza",
	symbol   = "LTf",
	usename  = 1,
	utype    = "forza",
	scale    = 9964.01641818352,
	default  = "kN",
	link     = "Ton (unità di misura)#Unità di forza",
    },
    ["Mdyn"] = {
	name1    = "megadyne",
	symbol   = "Mdyn",
	utype    = "forza",
	scale    = 10,
	default  = "lb-f",
	link     = "Dyne",
    },
    ["mdyn"] = {
	name1    = "millidyne",
	symbol   = "mdyn",
	utype    = "forza",
	scale    = 0.00000001,
	default  = "gr-f",
	link     = "Dyne",
    },
    ["mg-f"] = {
	name1    = "milligrammo forza",
	name2    = "milligrammi forza",
	symbol   = "mg<sub>f</sub>",
	utype    = "forza",
	scale    = 0.00000980665,
	default  = "μN",
	link     = "Chilogrammo forza",
    },
    ["mgf"] = {
	name1    = "milligrammo forza",
	name2    = "milligrammi forza",
	symbol   = "mgf",
	utype    = "forza",
	scale    = 0.00000980665,
	default  = "μN",
	link     = "Chilogrammo forza",
    },
    ["Mp"] = {
	name1    = "megapond",
	symbol   = "Mp",
	utype    = "forza",
	scale    = 9806.65,
	default  = "kN",
	link     = "Chilogrammo forza",
    },
    ["mp"] = {
	name1    = "millipond",
	symbol   = "mp",
	utype    = "forza",
	scale    = 0.00000980665,
	default  = "μN",
	link     = "Chilogrammo forza",
    },
    ["N"] = {
	_name1   = "newton",
	_symbol  = "N",
	utype    = "forza",
	scale    = 1,
	prefixes = 1,
	default  = "lb-f",
	link     = "Newton (unità di misura)",
    },
    ["oz-f"] = {
	name1    = "oncia forza",
	name2    = "once forza",
	symbol   = "oz<sub>f</sub>",
	utype    = "forza",
	scale    = 0.2780138203095378125,
	default  = "mN",
	link     = "Libbra forza",
    },
    ["p"] = {
	name1    = "pond",
	symbol   = "p",
	utype    = "forza",
	scale    = 0.00980665,
	default  = "mN",
	link     = "Chilogrammo forza",
    },
    ["pdl"] = {
	name1    = "poundal",
	symbol   = "pdl",
	utype    = "forza",
	scale    = 0.138254954376,
	default  = "N",
    },
    ["S/T-f"] = {
	name1    = "short ton forza",
	symbol   = "S/T<sub>f</sub>",
	utype    = "forza",
	scale    = 8896.443230521,
	default  = "kN",
	link     = "Ton (unità di misura)#Unità di forza",
    },
    ["S/Tf"] = {
	name1    = "short ton-forza",
	symbol   = "S/Tf",
	utype    = "forza",
	scale    = 8896.443230521,
	default  = "kN",
	link     = "Ton (unità di misura)#Unità di forza",
    },
    ["ST-f"] = {
	name1    = "short ton forza",
	symbol   = "ST<sub>f</sub>",
	utype    = "forza",
	scale    = 8896.443230521,
	default  = "kN",
	link     = "Ton (unità di misura)#Unità di forza",
    },
    ["STf"] = {
	name1    = "short ton forza",
	symbol   = "STf",
	usename  = 1,
	utype    = "forza",
	scale    = 8896.443230521,
	default  = "kN",
	link     = "Ton (unità di misura)#Unità di forza",
    },
    ["t-f"] = {
	name1    = "tonnellata forza",
	name2    = "tonnellate forza",
	symbol   = "t<sub>f</sub>",
	utype    = "forza",
	scale    = 9806.65,
	default  = "kN",
	link     = "Chilogrammo forza",
    },
    ["tf"] = {
	name1    = "tonnellata forza",
	name2    = "tonnellate forza",
	symbol   = "tf",
	utype    = "forza",
	scale    = 9806.65,
	default  = "kN",
	link     = "Chilogrammo forza",
    },
    ["dyne"] = {
	target   = "dyn",
    },
    ["newton"] = {
	target   = "N",
    },
    ["lb-f"] = {
	target   = "lbf",
    },
    ["libbra forza"] = {
	target   = "lbf",
    },
    ["lb(f)"] = {
	target   = "lbf",
    },
    ["L/T-f"] = {
	target   = "LTf",
    },
    ["ozf"] = {
	target   = "oz-f",
    },
    ["poundal"] = {
	target   = "pdl",
    },
    ["tonnellata forza"] = {
	target   = "tf",
    },
    ["grammo forza"] = {
	target   = "gf",
    },
    ["grammi forza"] = {
	target   = "gf",
    },
    ["chilogrammo forza"] = {
	target   = "kgf",
    },
    ["chilogrammi forza"] = {
	target   = "kgf",
    },
    ["G"] = {
	_name1   = "gauss",
	_symbol  = "G",
	utype    = "forza del campo magnetico",
	scale    = 0.0001,
	prefixes = 1,
	default  = "T",
	link     = "Gauss (unità di misura)",
    },
    ["T"] = {
	_name1   = "tesla",
	_symbol  = "T",
	utype    = "forza del campo magnetico",
	scale    = 1,
	prefixes = 1,
	default  = "G",
	link     = "Tesla (unità di misura)",
    },
    ["tesla"] = {
	target   = "T",
    },
    ["gauss"] = {
	target   = "G",
    },
    ["kPa/m"] = {
	per      = { "kPa", "-m-frac" },
	utype    = "gradiente di frattura",
	default  = "psi/ft",
    },
    ["psi/ft"] = {
	per      = { "psi", "-ft-frac" },
	utype    = "gradiente di frattura",
	default  = "kPa/m",
    },
    ["admi"] = {
	name1    = "miglio marino inglese",
	name2    = "miglia marine inglesi",
	symbol   = "nmi&nbsp;(inglesi)",
	utype    = "lunghezza",
	scale    = 1853.184,
	default  = "km",
	link     = "Miglio nautico",
    },
    ["au"] = {
	name1    = "unità astronomica",
	name2    = "unità astronomiche",
	symbol   = "au",
	utype    = "lunghezza",
	scale    = 149597870700,
	default  = "km",
    },
    ["Brnmi"] = {
	name1    = "miglio marino inglese",
	name2    = "miglia marine inglesi",
	symbol   = "nmi&nbsp;(inglesi)",
	utype    = "lunghezza",
	scale    = 1853.184,
	default  = "km",
	link     = "Miglio nautico",
    },
    ["bu"] = {
	symbol   = "bu",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 0.0030303030303030303,
	default  = "mm",
	link     = "Unità di misura giapponesi",
    },
    ["ch"] = {
	name1    = "catena",
	symbol   = "ch",
	utype    = "lunghezza",
	scale    = 20.1168,
	default  = "m",
	subdivs  = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
	link     = "Catena (unità di misura)",
    },
    ["chlk"] = {
	name1    = "[[Catena (unità di misura)|catena]]",
	symbol   = "[[Catena (unità di misura)|ch]]",
	utype    = "lunghezza",
	scale    = 20.1168,
	default  = "ft m",
	link     = "",
    },
    ["chain"] = {
	name1    = "catena",
	symbol   = "chain",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 20.1168,
	default  = "m",
	subdivs  = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } },
	link     = "Catena (unità di misura)",
    },
    ["chainlk"] = {
	symbol   = "[[Catena (unità di misura)|chain]]",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 20.1168,
	default  = "ft m",
	link     = "",
    },
    ["dpcm"] = {
	symbol   = "dot/cm",
	utype    = "lunghezza",
	scale    = 100,
	invert   = -1,
	iscomplex= true,
	default  = "dpi",
	link     = "Punti per pollice",
    },
    ["dpi"] = {
	symbol   = "DPI",
	utype    = "lunghezza",
	scale    = 39.370078740157481,
	invert   = -1,
	iscomplex= true,
	default  = "pitch",
	link     = "Punti per pollice",
    },
    ["fathom"] = {
	name1    = "braccio",
	name2    = "braccia",
	symbol   = "fathom",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 1.8288,
	default  = "m",
	link     = "Braccio (unità di misura)",
    },
    ["foot"] = {
	name1    = "piede",
	name2    = "piedi",
	symbol   = "ft",
	utype    = "lunghezza",
	scale    = 0.3048,
	default  = "m",
	subdivs  = { ["in"] = { 12, default = "m" } },
	link     = "Piede (unità di misura)",
    },
    ["ft"] = {
	name1    = "piede",
	name2    = "piedi",
	symbol   = "ft",
	utype    = "lunghezza",
	scale    = 0.3048,
	exception= "integer_more_precision",
	default  = "m",
	subdivs  = { ["in"] = { 12, default = "m" } },
	link     = "Piede (unità di misura)",
    },
    ["furlong"] = {
	symbol   = "furlong",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 201.168,
	default  = "m",
    },
    ["Gly"] = {
	name1    = "giga anno luce",
	name2    = "giga anni luce",
	symbol   = "Gly",
	utype    = "lunghezza",
	scale    = 9.4607304725808e24,
	default  = "Mpc",
	link     = "Anno luce",
    },
    ["Gpc"] = {
	name1    = "gigaparsec",
	symbol   = "Gpc",
	utype    = "lunghezza",
	scale    = 3.0856775814671916e25,
	default  = "Gly",
	link     = "Parsec",
    },
    ["hand"] = {
	name1    = "hand",
	symbol   = "h",
	utype    = "lunghezza",
	builtin  = "hand",
	scale    = 0.1016,
	iscomplex= true,
	default  = "in cm",
	link     = "Hand (unit)]] -->",
    },
    ["in"] = {
	name1    = "pollice",
	name2    = "pollici",
	symbol   = "in",
	utype    = "lunghezza",
	scale    = 0.0254,
	exception= "subunit_more_precision",
	default  = "mm",
	link     = "Pollice (unità di misura)",
    },
    ["inabbreviated"] = {
	symbol   = "in",
	utype    = "lunghezza",
	scale    = 0.0254,
	default  = "mm",
	link     = "Pollice (unità di misura)",
    },
    ["kly"] = {
	name1    = "chilo anno luce",
	name2    = "chilo anni luce",
	symbol   = "kly",
	utype    = "lunghezza",
	scale    = 9.4607304725808e18,
	default  = "pc",
	link     = "Anno luce",
    },
    ["kpc"] = {
	name1    = "chiloparsec",
	symbol   = "kpc",
	utype    = "lunghezza",
	scale    = 3.0856775814671916e19,
	default  = "kly",
	link     = "Parsec",
    },
    ["LD"] = {
	name1    = "distanza lunare",
	symbol   = "LD",
	utype    = "lunghezza",
	scale    = 384403000,
	default  = "km",
    },
    ["league"] = {
	name1    = "lega",
	symbol   = "league",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 4828.032,
	default  = "km",
	link     = "Lega (unità di misura)",
    },
    ["ly"] = {
	name1    = "anno luce",
	name2    = "anni luce",
	symbol   = "al",
	utype    = "lunghezza",
	scale    = 9.4607304725808e15,
	default  = "au",
    },
    ["m"] = {
	_name1   = "metro",
	_name2   = "metri",
	_symbol  = "m",
	utype    = "lunghezza",
	scale    = 1,
	prefixes = 1,
	default  = "v > 0 and v < 3 ! ftin ! ft",
	link     = "Metro",
    },
    ["mi"] = {
	name1    = "miglio",
	name2    = "miglia",
	symbol   = "mi",
	utype    = "lunghezza",
	scale    = 1609.344,
	default  = "km",
	subdivs  = { ["ch"] = { 80, default = "km" }, ["chlk"] = { 80, default = "km" }, ["chain"] = { 80, default = "km" }, ["chainlk"] = { 80, default = "km" }, ["ft"] = { 5280, default = "km" }, ["furlong"] = { 8, default = "km" }, ["yd"] = { 1760, default = "km" } },
	link     = "Miglio (unità di misura)",
    },
    ["mil"] = {
	name1    = "millesimo di pollice",
	name2    = "millesimi di pollice",
	symbol   = "mil",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 0.0000254,
	default  = "mm",
	link     = "Pollice (unità di misura)",
    },
    ["Mly"] = {
	name1    = "mega anno luce",
	name2    = "mega anni luce",
	symbol   = "Mly",
	utype    = "lunghezza",
	scale    = 9.4607304725808e21,
	default  = "kpc",
	link     = "Anno luce",
    },
    ["Mpc"] = {
	name1    = "megaparsec",
	symbol   = "Mpc",
	utype    = "lunghezza",
	scale    = 3.0856775814671916e22,
	default  = "Mly",
	link     = "Parsec",
    },
    ["NM"] = {
	name1    = "miglio nautico",
	name2    = "miglia nautiche",
	symbol   = "NM",
	utype    = "lunghezza",
	scale    = 1852,
	default  = "km",
    },
    ["nmi"] = {
	name1    = "miglio nautico",
	name2    = "miglia nautiche",
	symbol   = "nmi",
	utype    = "lunghezza",
	scale    = 1852,
	default  = "km",
    },
    ["oldUKnmi"] = {
	name1    = "miglio nautico inglese",
	name2    = "miglia nautiche inglesi",
	symbol   = "nmi&nbsp;(inglesi)",
	utype    = "lunghezza",
	scale    = 1853.184,
	default  = "km",
	link     = "Miglio nautico",
    },
    ["oldUSnmi"] = {
	name1    = "miglio nautico statunitense",
	name2    = "miglia nautiche statunitensi",
	symbol   = "nmi&nbsp;(statunitense)",
	utype    = "lunghezza",
	scale    = 1853.24496,
	default  = "km",
	link     = "Miglio nautico",
    },
    ["pc"] = {
	name1    = "parsec",
	symbol   = "pc",
	utype    = "lunghezza",
	scale    = 3.0856775814671916e16,
	default  = "ly",
    },
    ["perch"] = {
	name2    = "perches",
	symbol   = "perch",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 5.0292,
	default  = "m",
	link     = "Rod (unità di misura)",
    },
    ["pitch"] = {
	symbol   = "μm",
	utype    = "lunghezza",
	scale    = 1e-6,
	default  = "dpi",
	defkey   = "pitch",
	linkey   = "pitch",
	link     = "Punti per pollice",
    },
    ["pole"] = {
	symbol   = "pole",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 5.0292,
	default  = "m",
	link     = "Rod (unità di misura)",
    },
    ["pre1954U.S.nmi"] = {
	target   = "oldUSnmi",
    },
    ["pre1954USnmi"] = {
	target   = "oldUSnmi",
    },
    ["rd"] = {
	name1    = "rod",
	symbol   = "rd",
	utype    = "lunghezza",
	scale    = 5.0292,
	default  = "ft m",
	link     = "Rod (unità di misura)",
    },
    ["royal cubit"] = {
	name1    = "cubito reale egizio",
	symbol   = "cu",
	utype    = "lunghezza",
	scale    = 0.523,
	default  = "mm",
	link     = "Cubito",
    },
    ["rtkm"] = {
	name1    = "route kilometre",
	symbol   = "km",
	utype    = "lunghezza",
	scale    = 1000,
	default  = "mi",
	link     = "chilometro",
    },
    ["rtmi"] = {
	name1    = "route mile",
	symbol   = "mi",
	utype    = "lunghezza",
	scale    = 1609.344,
	default  = "km",
	link     = "Miglio (unità di misura)",
    },
    ["shaku"] = {
	symbol   = "shaku",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 0.30303030303030304,
	default  = "m",
    },
    ["sm"] = {
	name1    = "smoot",
	symbol   = "sm",
	utype    = "lunghezza",
	scale    = 1.70180,
	default  = "m",
    },
    ["smi"] = {
	name1    = "statute mile",
	symbol   = "mi",
	utype    = "lunghezza",
	scale    = 1609.344,
	default  = "km",
	subdivs  = { ["chain"] = { 80, default = "km" } },
	link     = "Miglio (unità di misura)",
    },
    ["raggio solare"] = {
	name1    = "raggio solare",
	name2    = "raggi solari",
	symbol   = "''R''<sub>☉</sub>",
	utype    = "lunghezza",
	scale    = 695700e3,
	default  = "km",
    },
    ["sun"] = {
	symbol   = "sun",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 0.030303030303030304,
	default  = "mm",
	link     = "Unità di misura giapponesi",
    },
    ["thou"] = {
	name1    = "millesimo di pollice",
	name2    = "millesimi di pollice",
	symbol   = "thou",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 0.0000254,
	default  = "mm",
	link     = "Pollice (unità di misura)",
    },
    ["versta"] = {
	symbol   = "versta",
	usename  = 1,
	utype    = "lunghezza",
	scale    = 1066.8,
	default  = "km mi",
    },
    ["yd"] = {
	name1    = "iarda",
	name2    = "iarde",
	symbol   = "yd",
	utype    = "lunghezza",
	scale    = 0.9144,
	default  = "m",
	subdivs  = { ["ft"] = { 3, default = "m" } },
    },
    ["μin"] = {
	name1    = "micropollice",
	name2    = "micropollici",
	symbol   = "μin",
	utype    = "lunghezza",
	scale    = 0.0000000254,
	default  = "nm",
	link     = "Pollice (unità di misura)",
    },
    ["Å"] = {
	name1    = "ångström",
	symbol   = "Å",
	utype    = "lunghezza",
	scale    = 0.0000000001,
	default  = "in",
    },
    ["Hz"] = {
	_name1   = "hertz",
	_symbol  = "Hz",
	utype    = "lunghezza",
	scale    = 3.3356409519815204e-9,
	invert   = -1,
	iscomplex= true,
	prefixes = 1,
	default  = "m",
	link     = "Hertz",
    },
    ["-ft-frac"] = {
	target   = "ft",
	link     = "gradiente di fratturazione",
    },
    ["-in-stiff"] = {
	target   = "in",
	link     = "Rigidezza",
    },
    ["-m-frac"] = {
	target   = "m",
	link     = "gradiente di fratturazione",
    },
    ["-m-stiff"] = {
	target   = "m",
	link     = "Rigidezza",
    },
    ["100km"] = {
	target   = "km",
	multiplier= 100,
    },
    ["admiralty nmi"] = {
	target   = "oldUKnmi",
    },
    ["angstrom"] = {
	target   = "Å",
    },
    ["ångström"] = {
	target   = "Å",
    },
    ["anno luce"] = {
	target   = "ly",
    },
    ["anni luce"] = {
	target   = "ly",
    },
    ["ua"] = {
	target   = "au",
    },
    ["UA"] = {
	target   = "au",
    },
    ["al"] = {
	target   = "ly",
    },
    ["feet"] = {
	target   = "ft",
    },
    ["hands"] = {
	target   = "hand",
    },
    ["iarda"] = {
	target   = "yd",
    },
    ["iarde"] = {
	target   = "yd",
    },
    ["inch"] = {
	target   = "in",
    },
    ["braccio"] = {
	target   = "fathom",
    },
    ["braccia"] = {
	target   = "fathom",
    },
    ["light-year"] = {
	target   = "ly",
    },
    ["meter"] = {
	target   = "m",
    },
    ["meters"] = {
	target   = "m",
    },
    ["metre"] = {
	target   = "m",
    },
    ["metres"] = {
	target   = "m",
    },
    ["metro"] = {
	target   = "m",
    },
    ["metri"] = {
	target   = "m",
    },
    ["micrometro"] = {
	target   = "μm",
    },
    ["micron"] = {
	target   = "μm",
	default  = "μin",
    },
    ["mile"] = {
	target   = "mi",
    },
    ["miles"] = {
	target   = "mi",
    },
    ["miglio"] = {
	target   = "mi",
    },
    ["miglia"] = {
	target   = "mi",
    },
    ["miglio nautico"] = {
	target   = "nmi",
    },
    ["miglia nautiche"] = {
	target   = "nmi",
    },
    ["parsec"] = {
	target   = "pc",
    },
    ["pd"] = {
	target   = "ft",
    },
    ["piede"] = {
	target   = "ft",
    },
    ["piedi"] = {
	target   = "ft",
    },
    ["pollice"] = {
	target   = "in",
    },
    ["pollici"] = {
	target   = "in",
    },
    ["rod"] = {
	target   = "rd",
    },
    ["smoot"] = {
	target   = "sm",
    },
    ["uin"] = {
	target   = "μin",
    },
    ["yard"] = {
	target   = "yd",
    },
    ["yards"] = {
	target   = "yd",
    },
    ["yds"] = {
	target   = "yd",
    },
    ["-Lcwt"] = {
	name1    = "hundredweight",
	symbol   = "cwt",
	utype    = "massa",
	scale    = 50.80234544,
	default  = "lb",
    },
    ["-Scwt"] = {
	name1    = "hundredweight",
	symbol   = "cwt",
	utype    = "massa",
	scale    = 45.359237,
	default  = "lb",
    },
    ["-ST"] = {
	name1    = "short ton",
	symbol   = "ST",
	utype    = "massa",
	scale    = 907.18474,
	default  = "t",
    },
    ["carat"] = {
	name1    = "carato",
	name2    = "carati",
	symbol   = "carat",
	usename  = 1,
	utype    = "massa",
	scale    = 0.0002,
	default  = "g",
    },
    ["carato"] = {
	target   = "carat",
    },
    ["carati"] = {
	target   = "carat",
    },
    ["drachm"] = {
	name1    = "dramma",
	name1_us = "dramme",
	symbol   = "drachm",
	usename  = 1,
	utype    = "massa",
	scale    = 0.001771845195,
	default  = "g",
	link     = "Dramma (unità di misura)",
    },
    ["dram"] = {
	target   = "drachm",
    },
    ["dramma"] = {
	target   = "drachm",
    },
    ["dramme"] = {
	target   = "drachm",
    },
    ["dwt"] = {
	name1    = "pennyweight",
	symbol   = "dwt",
	utype    = "massa",
	scale    = 0.00155517384,
	default  = "g",
	link     = "Sistema consuetudinario statunitense#Unità di massa",
    },
    ["DWton"] = {
	name1    = "tonnellaggio di portata lorda",
	symbol   = "deadweight ton",
	usename  = 1,
	utype    = "massa",
	scale    = 1016.0469088,
	default  = "DWtonne",
    },
    ["DWtonne"] = {
	name1    = "tonnellaggio di portata lorda in long ton",
	symbol   = "deadweight tonne",
	usename  = 1,
	utype    = "massa",
	scale    = 1000,
	default  = "DWton",
	link     = "Tonnellaggio di portata lorda",
    },
    ["g"] = {
	_name1   = "grammo",
	_name2   = "grammi",
	_symbol  = "g",
	utype    = "massa",
	scale    = 0.001,
	prefixes = 1,
	default  = "oz",
	link     = "Grammo",
    },
    ["gr"] = {
	name1    = "grano",
	name2    = "grani",
	symbol   = "gr",
	utype    = "massa",
	scale    = 0.00006479891,
	default  = "g",
	link     = "Grano (unità di misura)",
    },
    ["Gt"] = {
	name1    = "gigatonnellata",
	name2    = "gigatonnellate",
	symbol   = "Gt",
	utype    = "massa",
	scale    = 1000000000000,
	default  = "LT ST",
	link     = "Tonnellata",
    },
    ["impgalh2o"] = {
	name1    = "gallone imperiale d'acqua",
	name2    = "galloni imperiali d'acqua",
	symbol   = "imp&nbsp;gal H<sub>2</sub>O",
	utype    = "massa",
	scale    = 4.5359236999999499,
	default  = "lb kg",
	link     = "Gallone imperiale",
    },
    ["kt"] = {
	name1    = "chilotonnellata",
	name2    = "chilotonnellate",
	symbol   = "kt",
	utype    = "massa",
	scale    = 1000000,
	default  = "LT ST",
	link     = "Tonnellata",
    },
    ["lb"] = {
	name1    = "libbra",
	name2    = "libbre",
	symbol   = "lb",
	utype    = "massa",
	scale    = 0.45359237,
	exception= "integer_more_precision",
	default  = "kg",
	subdivs  = { ["oz"] = { 16, default = "kg" } },
    },
    ["Lcwt"] = {
	name1    = "quintale inglese",
	symbol   = "Lcwt",
	usename  = 1,
	utype    = "massa",
	scale    = 50.80234544,
	default  = "lb",
	subdivs  = { ["qtr"] = { 4, default = "kg" }, ["st"] = { 8, default = "kg" } },
	link     = "Hundredweight",
    },
    ["long cwt"] = {
	name1    = "long hundredweight",
	symbol   = "long&nbsp;cwt",
	utype    = "massa",
	scale    = 50.80234544,
	default  = "kg",
	subdivs  = { ["qtr"] = { 4, default = "kg" } },
	link     = "Hundredweight",
    },
    ["long qtr"] = {
	name1    = "long quarter",
	symbol   = "long&nbsp;qtr",
	utype    = "massa",
	scale    = 12.70058636,
	default  = "kg",
	link     = "Avoirdupois",
    },
    ["LT"] = {
	symbol   = "long ton",
	usename  = 1,
	utype    = "massa",
	scale    = 1016.0469088,
	default  = "t",
	subdivs  = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },
    },
    ["lt"] = {
	name1    = "long ton",
	symbol   = "LT",
	utype    = "massa",
	scale    = 1016.0469088,
	default  = "t",
	subdivs  = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },
    },
    ["metric ton"] = {
	name1    = "tonnellata",
	name2    = "tonnellate",
	symbol   = "metric ton",
	usename  = 1,
	utype    = "massa",
	scale    = 1000,
	default  = "LT ST",
    },
    ["MT"] = {
	name1    = "tonnellata",
	name2    = "tonnellate",
	symbol   = "t",
	utype    = "massa",
	scale    = 1000,
	default  = "LT ST",
    },
    ["Mt"] = {
	name1    = "megatonnellata",
	name2    = "megatonnellate",
	symbol   = "Mt",
	utype    = "massa",
	scale    = 1000000000,
	default  = "LT ST",
	link     = "Tonnellata",
    },
    ["oz"] = {
	name1    = "oncia",
	symbol   = "oz",
	utype    = "massa",
	scale    = 0.028349523125,
	default  = "g",
	link     = "Oncia (unità di misura)",
    },
    ["ozt"] = {
	name1    = "oncia troy",
	name2    = "once troy",
	symbol   = "ozt",
	utype    = "massa",
	scale    = 0.0311034768,
	default  = "g",
    },
    ["pdr"] = {
	name1    = "libbra",
	name2    = "libbre",
	symbol   = "pdr",
	utype    = "massa",
	scale    = 0.45359237,
	default  = "kg",
    },
    ["qtr"] = {
	name1    = "quarter",
	symbol   = "qtr",
	utype    = "massa",
	scale    = 12.70058636,
	default  = "kg",
	subdivs  = { ["lb"] = { 28, default = "kg" } },
	link     = "Avoirdupois",
    },
    ["Scwt"] = {
	name1    = "short hundredweight",
	symbol   = "Scwt",
	usename  = 1,
	utype    = "massa",
	scale    = 45.359237,
	default  = "kg",
	link     = "Hundredweight",
    },
    ["short cwt"] = {
	name1    = "short hundredweight",
	symbol   = "short&nbsp;cwt",
	utype    = "massa",
	scale    = 45.359237,
	default  = "kg",
	link     = "Hundredweight",
    },
    ["short qtr"] = {
	name1    = "short quarter",
	symbol   = "short&nbsp;qtr",
	utype    = "massa",
	scale    = 11.33980925,
	default  = "kg",
	link     = "Avoirdupois",
    },
    ["ST"] = {
	symbol   = "short ton",
	usename  = 1,
	utype    = "massa",
	scale    = 907.18474,
	default  = "t",
	subdivs  = { ["Scwt"] = { 20, default = "t", unit = "-Scwt" } },
    },
    ["shtn"] = {
	name1    = "short ton",
	symbol   = "sh&nbsp;tn",
	utype    = "massa",
	scale    = 907.18474,
	default  = "t",
    },
    ["shton"] = {
	symbol   = "ton",
	usename  = 1,
	utype    = "massa",
	scale    = 907.18474,
	default  = "t",
	link     = "Ton (unità di misura)",
    },
    ["massa gioviana"] = {
	name1    = "massa gioviana",
	name2    = "masse gioviane",
	symbol   = "| ''M''<sub>J</sub>",
	utype    = "massa",
	scale    = 1.89819e27,
	default  = "kg",
    },
    ["massa solare"] = {
	name1    = "massa solare",
	name2    = "masse solari",
	symbol   = "''M''<sub>☉</sub>",
	utype    = "massa",
	scale    = 1.98855e30,
	default  = "kg",
    },
    ["massa terrestre"] = {
	name1    = "massa terrestre",
	name2    = "masse terrestri",
	symbol   = "''M''<sub>⊕</sub>",
	utype    = "massa",
	scale    = 597219e24,
	default  = "kg",
    },
    ["st"] = {
	name1    = "stone",
	symbol   = "st",
	utype    = "massa",
	scale    = 6.35029318,
	default  = "kg",
	subdivs  = { ["lb"] = { 14, default = "kg lb" } },
	link     = "Stone (unità di misura)",
    },
    ["t"] = {
	name1    = "tonnellata",
	name2    = "tonnellate",
	symbol   = "t",
	utype    = "massa",
	scale    = 1000,
	default  = "LT ST",
    },
    ["tonne"] = {
	name1    = "tonnellata",
	name2    = "tonnellate",
	symbol   = "t",
	utype    = "massa",
	scale    = 1000,
	default  = "shton",
    },
    ["troy pound"] = {
	name1    = "libbra troy",
	name2    = "libbre troy",
	symbol   = "troy pound",
	usename  = 1,
	utype    = "massa",
	scale    = 0.3732417216,
	default  = "kg",
	link     = "Sistema troy",
    },
    ["usgalh2o"] = {
	name1    = "gallone d'acqua US",
	name2    = "galloni d'acqua US",
	symbol   = "US&nbsp;gal H<sub>2</sub>O",
	utype    = "massa",
	scale    = 3.7776215836051126,
	default  = "kg",
	link     = "Gallone",
    },
    ["viss"] = {
	symbol   = "viss",
	utype    = "massa",
	scale    = 1.632932532,
	default  = "kg",
    },
    ["billion tonne"] = {
	target   = "e9t",
    },
    ["chilogrammo"] = {
	target   = "kg",
    },
    ["chilogrammi"] = {
	target   = "kg",
    },
    ["grammo"] = {
	target   = "g",
    },
    ["grammi"] = {
	target   = "g",
    },
    ["kilogram"] = {
	target   = "kg",
    },
    ["kilotonne"] = {
	target   = "kt",
    },
    ["lbs"] = {
	target   = "lb",
    },
    ["libbra"] = {
	target   = "lb",
    },
    ["libbre"] = {
	target   = "lb",
    },
    ["lbt"] = {
	target   = "troy pound",
    },
    ["lcwt"] = {
	target   = "Lcwt",
    },
    ["long ton"] = {
	target   = "LT",
    },
    ["masse gioviane"] = {
	target   = "massa gioviana",
    },
    ["masse terrestri"] = {
	target   = "massa terrestre",
    },
    ["masse solari"] = {
	target   = "massa solare",
    },
    ["mcg"] = {
	target   = "μg",
    },
    ["milioni di tonnellate"] = {
	target   = "e6t",
    },
    ["scwt"] = {
	target   = "Scwt",
    },
    ["short ton"] = {
	target   = "ST",
    },
    ["stone"] = {
	target   = "st",
    },
    ["migliaio di tonnellate"] = {
	target   = "e3t",
    },
    ["migliaia di tonnellate"] = {
	target   = "e3t",
    },
    ["thousand tonne"] = {
	target   = "e3t",
    },
    ["tonnes"] = {
	target   = "t",
    },
    ["tonnellata"] = {
	target   = "t",
    },
    ["tonnellate"] = {
	target   = "t",
    },
    ["kg/kW"] = {
	name1    = "chilogrammo per chilowatt",
	name2    = "chilogrammi per chilowatt",
	symbol   = "kg/kW",
	utype    = "massa per unità di potenza",
	scale    = 0.001,
	default  = "lb/hp",
	link     = "Watt",
    },
    ["lb/hp"] = {
	name1    = "libbra per cavallo vapore",
	name2    = "libbre per cavallo vapore",
	symbol   = "lb/hp",
	utype    = "massa per unità di potenza",
	scale    = 0.00060827738784176115,
	default  = "kg/kW",
	link     = "Cavallo vapore",
    },
    ["kg/h"] = {
	per      = { "kg", "h" },
	utype    = "massa per unità di tempo",
	default  = "lb/h",
    },
    ["lb/h"] = {
	per      = { "lb", "h" },
	utype    = "massa per unità di tempo",
	default  = "kg/h",
    },
    ["g-mol/d"] = {
	name1    = "grammomole per giorno",
	name2    = "grammomoli per giorno",
	symbol   = "g&#8209;mol/d",
	utype    = "molar rate",
	scale    = 1.1574074074074073e-5,
	default  = "μmol/s",
	link     = "Mole",
    },
    ["g-mol/h"] = {
	name1    = "grammomole per ora",
	name2    = "grammomoli per ora",
	symbol   = "g&#8209;mol/h",
	utype    = "molar rate",
	scale    = 0.00027777777777777778,
	default  = "mmol/s",
	link     = "Mole",
    },
    ["g-mol/min"] = {
	name1    = "grammomole per minuto",
	name2    = "grammomoli per minuto",
	symbol   = "g&#8209;mol/min",
	utype    = "molar rate",
	scale    = 0.016666666666666666,
	default  = "g-mol/s",
	link     = "Mole",
    },
    ["g-mol/s"] = {
	name1    = "grammomole per secondo",
	name2    = "grammomoli per secondo",
	symbol   = "g&#8209;mol/s",
	utype    = "molar rate",
	scale    = 1,
	default  = "lb-mol/min",
	link     = "Mole",
    },
    ["gmol/d"] = {
	name1    = "grammomole per giorno",
	name2    = "grammomoli per giorno",
	symbol   = "gmol/d",
	utype    = "molar rate",
	scale    = 1.1574074074074073e-5,
	default  = "μmol/s",
	link     = "Mole",
    },
    ["gmol/h"] = {
	name1    = "grammomole per ora",
	name2    = "grammomoli per ora",
	symbol   = "gmol/h",
	utype    = "molar rate",
	scale    = 0.00027777777777777778,
	default  = "mmol/s",
	link     = "Mole",
    },
    ["gmol/min"] = {
	name1    = "grammomole per minuto",
	name2    = "grammomoli per minuto",
	symbol   = "gmol/min",
	utype    = "molar rate",
	scale    = 0.016666666666666666,
	default  = "gmol/s",
	link     = "Mole",
    },
    ["gmol/s"] = {
	name1    = "grammole per secondo",
	name2    = "grammoli per secondo",
	symbol   = "gmol/s",
	utype    = "molar rate",
	scale    = 1,
	default  = "lbmol/min",
	link     = "Mole",
    },
    ["kmol/d"] = {
	name1    = "chilomole per giorno",
	name2    = "chilomoli per giorno",
	symbol   = "kmol/d",
	utype    = "molar rate",
	scale    = 0.011574074074074073,
	default  = "mmol/s",
	link     = "Mole",
    },
    ["kmol/h"] = {
	name1    = "chilomole per ora",
	name2    = "chilomoli per ora",
	symbol   = "kmol/h",
	utype    = "molar rate",
	scale    = 0.27777777777777779,
	default  = "mol/s",
	link     = "Mole",
    },
    ["kmol/min"] = {
	name1    = "chilomole per minuto",
	name2    = "chilomoli per minuto",
	symbol   = "kmol/min",
	utype    = "molar rate",
	scale    = 16.666666666666668,
	default  = "mol/s",
	link     = "Mole",
    },
    ["kmol/s"] = {
	name1    = "chilomole per secondo",
	name2    = "chilomoli per secondo",
	symbol   = "kmol/s",
	utype    = "molar rate",
	scale    = 1000,
	default  = "lb-mol/s",
	link     = "Mole",
    },
    ["lb-mol/d"] = {
	name1    = "libbra-mole per giorno",
	name2    = "libbra-moli per giorno",
	symbol   = "lb&#8209;mol/d",
	utype    = "molar rate",
	scale    = 0.0052499116898148141,
	default  = "mmol/s",
	link     = "Mole",
    },
    ["lb-mol/h"] = {
	name1    = "libbra-mole per ora",
	name2    = "libbra-moli per ora",
	symbol   = "lb&#8209;mol/h",
	utype    = "molar rate",
	scale    = 0.12599788055555555,
	default  = "mol/s",
	link     = "Mole",
    },
    ["lb-mol/min"] = {
	name1    = "libbra-mole per minuto",
	name2    = "libbra-moli per minuto",
	symbol   = "lb&#8209;mol/min",
	utype    = "molar rate",
	scale    = 7.5598728333333334,
	default  = "mol/s",
	link     = "Mole",
    },
    ["lb-mol/s"] = {
	name1    = "libbra-mole per secondo",
	name2    = "libbra-moli per secondo",
	symbol   = "lb&#8209;mol/s",
	utype    = "molar rate",
	scale    = 453.59237,
	default  = "kmol/s",
	link     = "Mole",
    },
    ["lbmol/d"] = {
	name1    = "libbra-mole per giorno",
	name2    = "libbra-moli per giorno",
	symbol   = "lbmol/d",
	utype    = "molar rate",
	scale    = 0.0052499116898148141,
	default  = "mmol/s",
	link     = "Mole",
    },
    ["lbmol/h"] = {
	name1    = "libbra-mole per ora",
	name2    = "libbra-moli per ora",
	symbol   = "lbmol/h",
	utype    = "molar rate",
	scale    = 0.12599788055555555,
	default  = "mol/s",
	link     = "Mole",
    },
    ["lbmol/min"] = {
	name1    = "libbra-mole per minuto",
	name2    = "libbra-moli per minuto",
	symbol   = "lbmol/min",
	utype    = "molar rate",
	scale    = 7.5598728333333334,
	default  = "mol/s",
	link     = "Mole",
    },
    ["lbmol/s"] = {
	name1    = "libbra-mole per secondo",
	name2    = "libbra-moli per secondo",
	symbol   = "lbmol/s",
	utype    = "molar rate",
	scale    = 453.59237,
	default  = "kmol/s",
	link     = "Mole",
    },
    ["mmol/s"] = {
	name1    = "millimole per secondo",
	name2    = "millimoli per secondo",
	symbol   = "mmol/s",
	utype    = "molar rate",
	scale    = 0.001,
	default  = "lb-mol/d",
	link     = "Mole",
    },
    ["mol/d"] = {
	name1    = "mole per giorno",
	name2    = "moli per giorno",
	symbol   = "mol/d",
	utype    = "molar rate",
	scale    = 1.1574074074074073e-5,
	default  = "μmol/s",
	link     = "Mole",
    },
    ["mol/h"] = {
	name1    = "mole per ora",
	name2    = "moli per ora",
	symbol   = "mol/h",
	utype    = "molar rate",
	scale    = 0.00027777777777777778,
	default  = "mmol/s",
	link     = "Mole",
    },
    ["mol/min"] = {
	name1    = "mole per minuto",
	name2    = "moli per minuto",
	symbol   = "mol/min",
	utype    = "molar rate",
	scale    = 0.016666666666666666,
	default  = "mol/s",
	link     = "Mole",
    },
    ["mol/s"] = {
	name1    = "mole per secondo",
	name2    = "moli per secondo",
	symbol   = "mol/s",
	utype    = "molar rate",
	scale    = 1,
	default  = "lb-mol/min",
	link     = "Mole",
    },
    ["μmol/s"] = {
	name1    = "micromole per secondo",
	name2    = "micromoli per secondo",
	symbol   = "μmol/s",
	utype    = "molar rate",
	scale    = 0.000001,
	default  = "lb-mol/d",
	link     = "Mole",
    },
    ["umol/s"] = {
	target   = "μmol/s",
    },
    ["kgm"] = {
	name1    = "chilogrammometro",
	symbol   = "kg⋅m",
	utype    = "momento meccanico",
	scale    = 9.80665,
	default  = "Nm lbfft",
	link     = "Chilogrammo forza",
    },
    ["lb-fft"] = {
	name1    = "libbra forza-piede",
	name2    = "libbra forza-piedi",
	symbol   = "ft⋅lb<sub>f</sub>",
	utype    = "momento meccanico",
	scale    = 1.3558179483314004,
	default  = "Nm",
    },
    ["lb.in"] = {
	name1    = "libbra-forza pollice",
	name2    = "libbra-forza pollici",
	symbol   = "lb⋅in",
	utype    = "momento meccanico",
	scale    = 0.1129848290276167,
	default  = "mN.m",
    },
    ["m.kg-f"] = {
	name1    = "metro chilogrammo-forza",
	name2    = "metro chilogrammi-forza",
	symbol   = "m⋅kg<sub>f</sub>",
	utype    = "momento meccanico",
	scale    = 9.80665,
	default  = "Nm lbfft",
	link     = "Chilogrammo forza",
    },
    ["m.kgf"] = {
	name1    = "metro per chilogrammo-forza",
	symbol   = "m⋅kgf",
	utype    = "momento meccanico",
	scale    = 9.80665,
	default  = "Nm lbfft",
	link     = "Chilogrammo forza",
    },
    ["mN.m"] = {
	name1    = "millinewton per metro",
	symbol   = "mN⋅m",
	utype    = "momento meccanico",
	scale    = 0.001,
	default  = "lb.in",
	link     = "Newton per metro",
    },
    ["Nm"] = {
	_name1   = "newton per metro",
	_symbol  = "N⋅m",
	utype    = "momento meccanico",
	alttype  = "energia",
	scale    = 1,
	prefixes = 1,
	default  = "lbfft",
	link     = "Newton per metro",
    },
    ["kN/m"] = {
	per      = { "kN", "-m-stiff" },
	utype    = "momento meccanico",
	default  = "lbf/in",
    },
    ["lbf/in"] = {
	per      = { "lbf", "-in-stiff" },
	utype    = "momento meccanico",
	default  = "kN/m",
    },
    ["lb.ft"] = {
	target   = "lb-fft",
    },
    ["lb-f.ft"] = {
	target   = "lb-fft",
    },
    ["lbf.ft"] = {
	target   = "lb-fft",
    },
    ["lbf⋅ft"] = {
	target   = "lb-fft",
    },
    ["lb⋅ft"] = {
	target   = "lb-fft",
    },
    ["lbft"] = {
	target   = "lb-fft",
    },
    ["lbfft"] = {
	target   = "lb-fft",
    },
    ["kgf.m"] = {
	target   = "kgm",
    },
    ["kg.m"] = {
	target   = "kgm",
    },
    ["mkg-f"] = {
	target   = "m.kg-f",
    },
    ["mkgf"] = {
	target   = "m.kgf",
    },
    ["N m"] = {
	target   = "Nm",
    },
    ["N.m"] = {
	target   = "Nm",
    },
    ["N⋅m"] = {
	target   = "Nm",
    },
    ["cm/km"] = {
	name1    = "centimetro per chilometro",
	name2    = "centrimetri per chilometro",
	symbol   = "cm/km",
	utype    = "pendenza",
	scale    = 0.00001,
	default  = "ft/mi",
	link     = "Pendenza topografica",
    },
    ["ft/mi"] = {
	name1    = "piede per miglio",
	name2    = "piedi per miglio",
	symbol   = "ft/mi",
	utype    = "pendenza",
	scale    = 0.00018939393939393939,
	default  = "v < 5.28 ! c ! ! m/km",
	link     = "Pendenza topografica",
    },
    ["ft/nmi"] = {
	name1    = "piede per miglio nautico",
	name2    = "piedi per miglio nautico",
	symbol   = "ft/nmi",
	utype    = "pendenza",
	scale    = 0.00016457883369330455,
	default  = "v < 6.076 ! c ! ! m/km",
	link     = "Pendenza topografica",
    },
    ["in/ft"] = {
	name1    = "pollice per piede",
	name2    = "pollici per piede",
	symbol   = "in/ft",
	utype    = "pendenza",
	scale    = 0.083333333333333329,
	default  = "mm/m",
	link     = "Pendenza topografica",
    },
    ["in/mi"] = {
	name1    = "pollice per miglio",
	name2    = "pollici per miglio",
	symbol   = "in/mi",
	utype    = "pendenza",
	scale    = 1.5782828282828283e-5,
	default  = "v < 0.6336 ! m ! c ! m/km",
	link     = "Pendenza topografica",
    },
    ["m/km"] = {
	name1    = "metro per chilometro",
	name2    = "metri per chilometro",
	symbol   = "m/km",
	utype    = "pendenza",
	scale    = 0.001,
	default  = "ft/mi",
	link     = "Pendenza topografica",
    },
    ["mm/km"] = {
	name1    = "millimetro per chilometro",
	name2    = "millimetri per chilometro",
	symbol   = "mm/km",
	utype    = "pendenza",
	scale    = 0.000001,
	default  = "in/mi",
	link     = "Pendenza topografica",
    },
    ["mm/m"] = {
	name1    = "millimetro per metro",
	name2    = "millimetri per metro",
	symbol   = "mm/m",
	utype    = "pendenza",
	scale    = 0.001,
	default  = "in/ft",
	link     = "Pendenza topografica",
    },
    ["g-mol"] = {
	name1    = "gram-mole",
	symbol   = "g&#8209mol",
	utype    = "quantità chimica",
	scale    = 1,
	default  = "lbmol",
	link     = "Mole",
    },
    ["gmol"] = {
	name1    = "gram-mole",
	symbol   = "gmol",
	utype    = "quantità chimica",
	scale    = 1,
	default  = "lbmol",
	link     = "Mole",
    },
    ["kmol"] = {
	name1    = "kilomole",
	symbol   = "kmol",
	utype    = "quantità chimica",
	scale    = 1000,
	default  = "lbmol",
	link     = "Mole",
    },
    ["lb-mol"] = {
	name1    = "libbra-mole",
	symbol   = "lb&#8209;mol",
	utype    = "quantità chimica",
	scale    = 453.59237,
	default  = "mol",
	link     = "Mole",
    },
    ["lbmol"] = {
	name1    = "libbra-mole",
	symbol   = "lbmol",
	utype    = "quantità chimica",
	scale    = 453.59237,
	default  = "mol",
	link     = "Mole",
    },
    ["mol"] = {
	_name1   = "mole",
	_symbol  = "mol",
	utype    = "quantità chimica",
	scale    = 1,
	prefixes = 1,
	default  = "lbmol",
	link     = "Mole",
    },
    ["mole"] = {
	target   = "mol",
    },
    ["moli"] = {
	target   = "mol",
    },
    ["/acro"] = {
	name1    = "per acro",
	symbol   = "/acro",
	utype    = "per unità di area",
	scale    = 0.00024710538146716532,
	default  = "/ha",
	link     = "Acro",
    },
    ["/ha"] = {
	name1    = "per ettaro",
	symbol   = "/ha",
	utype    = "per unità di area",
	scale    = 100e-6,
	default  = "/acro",
	link     = "Ettaro",
    },
    ["/sqcm"] = {
	name1    = "per centimetro quadro",
	symbol   = "/cm²",
	utype    = "per unità di area",
	scale    = 1e4,
	default  = "/sqin",
	link     = "Metro quadrato",
    },
    ["/sqin"] = {
	name1    = "per pollice quadro",
	symbol   = "/in²",
	utype    = "per unità di area",
	scale    = 1550.0031000062002,
	default  = "/sqcm",
	link     = "Pollice quadro",
    },
    ["/sqkm"] = {
	name1    = "per chilometro quadro",
	symbol   = "/km²",
	utype    = "per unità di area",
	scale    = 1e-6,
	default  = "/sqmi",
	link     = "Chilometro quadrato",
    },
    ["/sqmi"] = {
	name1    = "per miglio quadro",
	symbol   = "/sq&nbsp;mi",
	utype    = "per unità di area",
	scale    = 3.8610215854244582e-7,
	default  = "/sqkm",
	link     = "Miglio quadro",
    },
    ["PD/acro"] = {
	name1    = "abitante per acro",
	name2    = "abitanti per acro",
	symbol   = "/acro",
	utype    = "per unità di area",
	scale    = 0.00024710538146716532,
	default  = "PD/ha",
	link     = "Acro",
    },
    ["PD/ha"] = {
	name1    = "abitante per ettaro",
	name2    = "abitanti per ettaro",
	symbol   = "/ha",
	utype    = "per unità di area",
	scale    = 100e-6,
	default  = "PD/acro",
	link     = "Ettaro",
    },
    ["PD/sqkm"] = {
	name1    = "abitante per chilometro quadro",
	name2    = "abitanti per chilometro quadro",
	symbol   = "/km²",
	utype    = "per unità di area",
	scale    = 1e-6,
	default  = "PD/sqmi",
	link     = "Chilometro quadrato",
    },
    ["PD/sqmi"] = {
	name1    = "abitante per miglio quadro",
	name2    = "abitanti per miglio quadro",
	symbol   = "/mi²",
	utype    = "per unità di area",
	scale    = 3.8610215854244582e-7,
	default  = "PD/sqkm",
	link     = "Miglio quadro",
    },
    ["/cm2"] = {
	target   = "/sqcm",
    },
    ["/in2"] = {
	target   = "/sqin",
    },
    ["/km2"] = {
	target   = "/sqkm",
    },
    ["pd/acro"] = {
	target   = "PD/acro",
    },
    ["pd/ha"] = {
	target   = "PD/ha",
    },
    ["PD/km2"] = {
	target   = "PD/sqkm",
    },
    ["pd/km2"] = {
	target   = "PD/sqkm",
    },
    ["PD/km²"] = {
	target   = "PD/sqkm",
    },
    ["pd/sqkm"] = {
	target   = "PD/sqkm",
    },
    ["pd/sqmi"] = {
	target   = "PD/sqmi",
    },
    ["/l"] = {
	name1    = "per litro",
	symbol   = "/l",
	utype    = "per unità di volume",
	scale    = 1000,
	default  = "/usgal",
	link     = "Litro",
    },
    ["/USgal"] = {
	name1    = "per gallone americano",
	symbol   = "/gal",
	utype    = "per unità di volume",
	scale    = 264.172052,
	default  = "/l",
	link     = "gallone americano",
	customary= 2,
    },
    ["/usgal"] = {
	target   = "/USgal",
    },
    ["bhp"] = {
	name1    = "cavallo vapore al freno",
	name2    = "cavalli vapore al freno",
	symbol   = "bhp",
	utype    = "potenza",
	scale    = 745.69987158227022,
	default  = "kW",
    },
    ["Cal/d"] = {
	name1    = "grande caloria al giorno",
	name2    = "grandi calorie al giorno",
	symbol   = "Cal/d",
	utype    = "potenza",
	scale    = 0.048425925925925928,
	default  = "kJ/d",
	link     = "Caloria",
    },
    ["Cal/h"] = {
	name1    = "grande caloria all'ora",
	name2    = "grandi calorie all'ora",
	symbol   = "Cal/h",
	utype    = "potenza",
	scale    = 1.1622222222222223,
	default  = "kJ/h",
	link     = "Caloria",
    },
    ["cal/h"] = {
	name1    = "calorie per hour",
	name2    = "calories per hour",
	symbol   = "cal/h",
	utype    = "potenza",
	scale    = 0.0011622222222222223,
	default  = "W",
	link     = "Caloria",
    },
    ["CV"] = {
	name1    = "cavallo vapore",
	name2    = "cavalli vapore",
	symbol   = "CV",
	utype    = "potenza",
	scale    = 735.49875,
	default  = "kW",
	link     = "Cavallo vapore#Cavallo vapore europeo (DIN)",
    },
    ["hk"] = {
	name1    = "cavallo vapore",
	name2    = "cavalli vapore",
	symbol   = "hk",
	utype    = "potenza",
	scale    = 735.49875,
	default  = "kW",
	link     = "Cavallo vapore#Cavallo vapore europeo (DIN)",
    },
    ["hp"] = {
	name1    = "cavallo vapore britannico",
	name2    = "cavalli vapore britannici",
	symbol   = "hp",
	utype    = "potenza",
	scale    = 745.69987158227022,
	default  = "kW",
    },
    ["hp-electric"] = {
	name1    = "electric horsepower",
	symbol   = "hp",
	utype    = "potenza",
	scale    = 746,
	default  = "kW",
    },
    ["hp-electrical"] = {
	name1    = "electrical horsepower",
	symbol   = "hp",
	utype    = "potenza",
	scale    = 746,
	default  = "kW",
    },
    ["hp-metric"] = {
	name1    = "cavallo vapore",
	symbol   = "hp",
	utype    = "potenza",
	scale    = 735.49875,
	default  = "kW",
	link     = "Cavallo vapore#Cavallo vapore europeo (DIN)",
    },
    ["ihp"] = {
	name1    = "indicated horsepower",
	symbol   = "ihp",
	utype    = "potenza",
	scale    = 745.69987158227022,
	default  = "kW",
    },
    ["kcal/h"] = {
	name1    = "chilocaloria all'ora",
	name2    = "chilocalorie all'ora",
	symbol   = "kcal/h",
	utype    = "potenza",
	scale    = 1.1622222222222223,
	default  = "kW",
	link     = "Caloria",
    },
    ["kJ/d"] = {
	name1    = "kilojoule al giorno",
	symbol   = "kJ/d",
	utype    = "potenza",
	scale    = 0.011574074074074073,
	default  = "Cal/d",
	link     = "Joule",
    },
    ["kJ/h"] = {
	name1    = "chilojoule all'ora",
	symbol   = "kJ/h",
	utype    = "potenza",
	scale    = 0.27777777777777779,
	default  = "W",
	link     = "Joule",
    },
    ["PS"] = {
	name1    = "cavallo vapore",
	name2    = "cavalli vapore",
	symbol   = "PS",
	utype    = "potenza",
	scale    = 735.49875,
	default  = "kW",
	link     = "Cavallo vapore#Cavallo vapore europeo (DIN)",
    },
    ["shp"] = {
	name1    = "cavallo vapore all'albero di trasmissione",
	name2    = "cavalli vapore all'albero di trasmissione",
	symbol   = "shp",
	utype    = "potenza",
	scale    = 745.69987158227022,
	default  = "kW",
	link     = "Cavallo vapore britannico#Shaft horsepower",
    },
    ["W"] = {
	_name1   = "watt",
	_symbol  = "W",
	utype    = "potenza",
	scale    = 1,
	prefixes = 1,
	default  = "hp",
	link     = "Watt",
    },
    ["BTU/h"] = {
	per      = { "BTU", "h" },
	utype    = "potenza",
	default  = "W",
    },
    ["Btu/h"] = {
	per      = { "Btu", "h" },
	utype    = "potenza",
	default  = "W",
    },
    ["BHP"] = {
	target   = "bhp",
    },
    ["cv"] = {
	target   = "CV",
    },
    ["btu/h"] = {
	target   = "BTU/h",
    },
    ["HP"] = {
	target   = "hp",
    },
    ["Hp"] = {
	target   = "hp",
    },
    ["hp-mechanical"] = {
	target   = "hp",
    },
    ["IHP"] = {
	target   = "ihp",
    },
    ["SHP"] = {
	target   = "shp",
    },
    ["whp"] = {
	target   = "hp",
    },
    ["hp/lb"] = {
	name1    = "cavallo vapore britannico per libbra",
	name2    = "cavalli vapore britannici per libbra",
	symbol   = "hp/lb",
	utype    = "potenza per unità di massa",
	scale    = 1643.986806,
	default  = "kW/kg",
	link     = "Rapporto potenza-peso",
    },
    ["hp/LT"] = {
	name1    = "cavallo vapore britannico per long ton",
	name2    = "cavalli vapore britannici per long ton",
	symbol   = "hp/LT",
	utype    = "potenza per unità di massa",
	scale    = 0.73392268125000004,
	default  = "kW/t",
	link     = "Rapporto potenza-peso",
    },
    ["hp/ST"] = {
	name1    = "cavallo vapore britannico per short ton",
	name2    = "cavalli vapore britannici per short ton",
	symbol   = "hp/ST",
	utype    = "potenza per unità di massa",
	scale    = 0.821993403,
	default  = "kW/t",
	link     = "Rapporto potenza-peso",
    },
    ["hp/t"] = {
	name1    = "cavallo vapore britannico per tonnellata",
	name2    = "cavalli vapore britannici per tonnellata",
	symbol   = "hp/t",
	utype    = "potenza per unità di massa",
	scale    = 0.74569987158227022,
	default  = "kW/t",
	link     = "Rapporto potenza-peso",
    },
    ["kW/kg"] = {
	name1    = "chilowatt per chilogrammo",
	symbol   = "kW/kg",
	utype    = "potenza per unità di massa",
	scale    = 1000,
	default  = "hp/lb",
	link     = "Rapporto potenza-peso",
    },
    ["kW/t"] = {
	name1    = "chilowatt per tonnellata",
	symbol   = "kW/t",
	utype    = "potenza per unità di massa",
	scale    = 1,
	default  = "PS/t",
	link     = "Rapporto potenza-peso",
    },
    ["PS/t"] = {
	name1    = "cavallo vapore per tonnellata",
	name2    = "cavalli vapore per tonnellata",
	symbol   = "PS/t",
	utype    = "potenza per unità di massa",
	scale    = 0.73549875,
	default  = "kW/t",
	link     = "Rapporto potenza-peso",
    },
    ["shp/lb"] = {
	name1    = "cavallo vapore all'albero di trasmissione per libbra",
	name2    = "cavalli vapore all'albero di trasmissione per libbra",
	symbol   = "shp/lb",
	utype    = "potenza per unità di massa",
	scale    = 1643.986806,
	default  = "kW/kg",
	link     = "Rapporto potenza-peso",
    },
    ["hp/tonne"] = {
	target   = "hp/t",
	default  = "kW/tonne",
    },
    ["kW/tonne"] = {
	target   = "kW/t",
    },
    ["atm"] = {
	name1    = "atmosfera",
	name2    = "atmosfere",
	symbol   = "atm",
	utype    = "pressione",
	scale    = 101325,
	default  = "kPa",
	link     = "Atmosfera (unità di misura)",
    },
    ["atmosfera"] = {
	target   = "atm",
    },
    ["atmosfere"] = {
	target   = "atm",
    },
    ["Ba"] = {
	name1    = "baria",
	symbol   = "Ba",
	utype    = "pressione",
	scale    = 0.1,
	default  = "Pa",
    },
    ["bar"] = {
	_name1   = "bar",
	_symbol  = "bar",
	utype    = "pressione",
	scale    = 100000,
	prefixes = 1,
	default  = "kPa",
	link     = "Bar (unità di misura)",
    },
    ["inHg"] = {
	name1    = "pollice di mercurio",
	name2    = "pollici di mercurio",
	symbol   = "inHg",
	utype    = "pressione",
	scale    = 3386.388640341,
	default  = "kPa",
	link     = "inHg",
    },
    ["kBa"] = {
	name1    = "chilobaria",
	symbol   = "kBa",
	utype    = "pressione",
	scale    = 100,
	default  = "hPa",
	link     = "Baria",
    },
    ["kg-f/cm2"] = {
	name1    = "chilogrammo forza per centimetro quadro",
	name2    = "chilogrammi forza per centimetro quadro",
	symbol   = "kg<sub>f</sub>/cm²",
	utype    = "pressione",
	scale    = 98066.5,
	default  = "psi",
	link     = "Chilogrammo forza",
    },
    ["kg/cm2"] = {
	name1    = "chilogrammo forza per centimetro quadro",
	name2    = "chilogrammi forza per centimetro quadro",
	symbol   = "kg/cm²",
	utype    = "pressione",
	scale    = 98066.5,
	default  = "psi",
	link     = "Chilogrammo forza",
    },
    ["ksi"] = {
	name1    = "kilopound per square inch",
	symbol   = "ksi",
	utype    = "pressione",
	scale    = 6894757.2931683613,
	default  = "MPa",
	link     = "psi (unità di misura)",
    },
    ["mb"] = {
	name1    = "millibar",
	symbol   = "mb",
	utype    = "pressione",
	scale    = 100,
	default  = "hPa",
	link     = "Bar (unità di misura)",
    },
    ["mmHg"] = {
	name1    = "millimetro di mercurio",
	name2    = "millimetri di mercurio",
	symbol   = "mmHg",
	utype    = "pressione",
	scale    = 133.322387415,
	default  = "kPa",
    },
    ["Pa"] = {
	_name1   = "pascal",
	_symbol  = "Pa",
	utype    = "pressione",
	scale    = 1,
	prefixes = 1,
	default  = "psi",
	link     = "Pascal (unità di misura)",
    },
    ["psi"] = {
	name1    = "libbra per pollice quadro",
	name2    = "libbre per pollice quadro",
	symbol   = "psi",
	utype    = "pressione",
	scale    = 6894.7572931683608,
	default  = "kPa",
	link     = "psi (unità di misura)",
    },
    ["Torr"] = {
	name1    = "torr",
	symbol   = "Torr",
	utype    = "pressione",
	scale    = 133.32236842105263,
	default  = "kPa",
    },
    ["N/cm2"] = {
	per      = { "N", "cm2" },
	utype    = "pressione",
	default  = "psi",
    },
    ["N/m2"] = {
	per      = { "N", "m2" },
	utype    = "pressione",
	default  = "psi",
    },
    ["g/cm2"] = {
	per      = { "g", "cm2" },
	utype    = "pressione",
	default  = "lb/sqft",
	multiplier= 9.80665,
    },
    ["g/m2"] = {
	per      = { "g", "m2" },
	utype    = "pressione",
	default  = "lb/sqft",
	multiplier= 9.80665,
    },
    ["kg/ha"] = {
	per      = { "kg", "ha" },
	utype    = "pressione",
	default  = "lb/acro",
	multiplier= 9.80665,
    },
    ["kg/m2"] = {
	per      = { "kg", "m2" },
	utype    = "pressione",
	default  = "lb/sqft",
	multiplier= 9.80665,
    },
    ["kgf/cm2"] = {
	target   = "kg/cm2",
    },
    ["lb/1000sqft"] = {
	per      = { "lb", "1000sqft" },
	utype    = "pressione",
	default  = "g/m2",
	multiplier= 9.80665,
    },
    ["lb/acro"] = {
	per      = { "lb", "acro" },
	utype    = "pressione",
	default  = "kg/ha",
	multiplier= 9.80665,
    },
    ["lb/sqft"] = {
	per      = { "lb", "sqft" },
	utype    = "pressione",
	default  = "kg/m2",
	multiplier= 9.80665,
    },
    ["lb/sqyd"] = {
	per      = { "lb", "sqyd" },
	utype    = "pressione",
	default  = "kg/m2",
	multiplier= 9.80665,
    },
    ["LT/acro"] = {
	per      = { "LT", "acro" },
	utype    = "pressione",
	default  = "t/ha",
	multiplier= 9.80665,
    },
    ["MT/ha"] = {
	per      = { "MT", "ha" },
	utype    = "pressione",
	default  = "LT/acro ST/acro",
	multiplier= 9.80665,
    },
    ["oz/sqft"] = {
	per      = { "oz", "sqft" },
	utype    = "pressione",
	default  = "g/m2",
	multiplier= 9.80665,
    },
    ["oz/sqyd"] = {
	per      = { "oz", "sqyd" },
	utype    = "pressione",
	default  = "g/m2",
	multiplier= 9.80665,
    },
    ["-lb/in2"] = {
	target   = "psi",
    },
    ["lbf/in2"] = {
	target   = "psi",
    },
    ["psf"] = {
	target   = "psi",
	symbol   = "psf",
    },
    ["ST/acro"] = {
	per      = { "ST", "acro" },
	utype    = "pressione",
	default  = "t/ha",
	multiplier= 9.80665,
    },
    ["t/ha"] = {
	per      = { "t", "ha" },
	utype    = "pressione",
	default  = "LT/acro ST/acro",
	multiplier= 9.80665,
    },
    ["tonne/acro"] = {
	per      = { "tonne", "acro" },
	utype    = "pressione",
	default  = "tonne/ha",
	multiplier= 9.80665,
    },
    ["tonne/ha"] = {
	per      = { "tonne", "ha" },
	utype    = "pressione",
	default  = "tonne/acro",
	multiplier= 9.80665,
    },
    ["kgfpsqcm"] = {
	target   = "kgf/cm2",
    },
    ["kgpsqcm"] = {
	target   = "kg/cm2",
    },
    ["kN/m2"] = {
	target   = "kPa",
    },
    ["lb/in2"] = {
	target   = "lbf/in2",
    },
    ["torr"] = {
	target   = "Torr",
    },
    ["pascal"] = {
	target   = "Pa",
    },
    ["Bq"] = {
	_name1   = "becquerel",
	_symbol  = "Bq",
	utype    = "radioattività",
	scale    = 1,
	prefixes = 1,
	default  = "pCi",
	link     = "Becquerel",
    },
    ["Ci"] = {
	_name1   = "curie",
	_symbol  = "Ci",
	utype    = "radioattività",
	scale    = 3.7e10,
	prefixes = 1,
	default  = "GBq",
	link     = "Curie (unità di misura)",
    },
    ["Rd"] = {
	_name1   = "rutherford",
	_symbol  = "Rd",
	utype    = "radioattività",
	scale    = 1e6,
	prefixes = 1,
	default  = "MBq",
	link     = "Rutherford (unità di misura)",
    },
    ["bequerel"] = {
	target   = "Bq",
    },
    ["curie"] = {
	target   = "Ci",
    },
    ["C"] = {
	name1    = "grado Celsius",
	name2    = "gradi Celsius",
	symbol   = "°C",
	usesymbol= 1,
	utype    = "temperatura",
	scale    = 1,
	offset   = -273.15,
	iscomplex= true,
	istemperature= true,
	default  = "F",
    },
    ["F"] = {
	name1    = "grado Fahrenheit",
	name2    = "gradi Fahrenheit",
	symbol   = "°F",
	usesymbol= 1,
	utype    = "temperatura",
	scale    = 0.55555555555555558,
	offset   = 32-273.15*(9/5),
	iscomplex= true,
	istemperature= true,
	default  = "C",
    },
    ["K"] = {
	_name1   = "kelvin",
	_symbol  = "K",
	usesymbol= 1,
	utype    = "temperatura",
	scale    = 1,
	offset   = 0,
	iscomplex= true,
	istemperature= true,
	prefixes = 1,
	default  = "C",
	link     = "Kelvin",
    },
    ["keVT"] = {
	name1    = "kiloelettronvolt",
	symbol   = "keV",
	utype    = "temperatura",
	scale    = 11.604505e6,
	offset   = 0,
	iscomplex= true,
	default  = "MK",
	link     = "Elettronvolt",
    },
    ["R"] = {
	name1    = "grado Rankine",
	name2    = "gradi Rankine",
	symbol   = "°R",
	usesymbol= 1,
	utype    = "temperatura",
	scale    = 0.55555555555555558,
	offset   = 0,
	iscomplex= true,
	istemperature= true,
	default  = "K",
    },
    ["Celsius"] = {
	target   = "C",
    },
    ["°C"] = {
	target   = "C",
    },
    ["°F"] = {
	target   = "F",
    },
    ["°R"] = {
	target   = "R",
    },
    ["Kelvin"] = {
	target   = "K",
    },
    ["century"] = {
	name1    = "secolo",
	name2    = "secoli",
	symbol   = "sec",
	utype    = "tempo",
	scale    = 3155760000,
	default  = "Gs",
    },
    ["d"] = {
	name2    = "giorni",
	symbol   = "giorno",
	usename  = 1,
	utype    = "tempo",
	scale    = 86400,
	default  = "ks",
    },
    ["decade"] = {
	name2    = "decadi",
	symbol   = "decade",
	usename  = 1,
	utype    = "tempo",
	scale    = 315576000,
	default  = "Ms",
    },
    ["dog year"] = {
	name1    = "dog year",
	symbol   = "dog yr",
	utype    = "tempo",
	scale    = 220903200,
	default  = "anno",
    },
    ["fortnight"] = {
	symbol   = "fortnight",
	usename  = 1,
	utype    = "tempo",
	scale    = 1209600,
	default  = "settimana",
    },
    ["h"] = {
	name1    = "ora",
	name2    = "ore",
	symbol   = "h",
	utype    = "tempo",
	scale    = 3600,
	default  = "ks",
    },
    ["long billion year"] = {
	name1    = "migliaio di miliardi di anni",
	name2    = "migliaia di miliardi di anni",
	symbol   = "Ta",
	utype    = "tempo",
	scale    = 31557600000000000000,
	default  = "Es",
	link     = "Annum",
    },
    ["millennium"] = {
	name1    = "millennio",
	name2    = "millennia",
	symbol   = "ka",
	utype    = "tempo",
	scale    = 31557600000,
	default  = "Gs",
    },
    ["milliard year"] = {
	name1    = "miliardo di anni",
	name2    = "miliardi di anni",
	symbol   = "Ga",
	utype    = "tempo",
	scale    = 31557600000000000,
	default  = "Ps",
	link     = "Annum",
    },
    ["million year"] = {
	name1    = "milione di anni",
	name2    = "milioni di anni",
	symbol   = "Ma",
	utype    = "tempo",
	scale    = 31557600000000,
	default  = "Ts",
	link     = "Annum",
    },
    ["min"] = {
	name1    = "minuto",
	name2    = "minuti",
	symbol   = "min",
	utype    = "tempo",
	scale    = 60,
	default  = "s",
    },
    ["month"] = {
	name2    = "mesi",
	symbol   = "mese",
	usename  = 1,
	utype    = "tempo",
	scale    = 2629800,
	default  = "Ms",
    },
    ["s"] = {
	_name1   = "secondo",
	_name2   = "secondi",
	_symbol  = "s",
	utype    = "tempo",
	scale    = 1,
	prefixes = 1,
	default  = "min",
	link     = "Secondo",
    },
    ["wk"] = {
	name2    = "settimane",
	symbol   = "settimana",
	usename  = 1,
	utype    = "tempo",
	scale    = 604800,
	default  = "Ms",
    },
    ["year"] = {
	name2    = "anni",
	symbol   = "anno",
	usename  = 1,
	utype    = "tempo",
	scale    = 31557600,
	default  = "Ms",
    },
    ["years"] = {
	target   = "year",
    },
    ["byr"] = {
	target   = "milliard year",
    },
    ["bilione di anni"] = {
	target   = "milliard year",
    },
    ["trilione di anni"] = {
	target   = "long billion year",
    },
    ["migliaio di milioni di anni"] = {
	target   = "milliard year",
    },
    ["migliaia di milioni di anni"] = {
	target   = "milliard year",
    },
    ["anno"] = {
	target   = "year",
    },
    ["anni"] = {
	target   = "year",
    },
    ["giorno"] = {
	target   = "d",
    },
    ["giorni"] = {
	target   = "d",
    },
    ["dog yr"] = {
	target   = "dog year",
    },
    ["Gyr"] = {
	target   = "milliard year",
    },
    ["kMyr"] = {
	target   = "milliard year",
    },
    ["kmyr"] = {
	target   = "milliard year",
    },
    ["kyr"] = {
	target   = "millennium",
    },
    ["long byr"] = {
	target   = "long billion year",
    },
    ["migliaia di miliardi di anni"] = {
	target   = "long billion year",
    },
    ["miliardi di anni"] = {
	target   = "milliard year",
    },
    ["miliardo di anni"] = {
	target   = "milliard year",
    },
    ["milione di anni"] = {
	target   = "million year",
    },
    ["milioni di anni"] = {
	target   = "million year",
    },
    ["minuto"] = {
	target   = "min",
    },
    ["minuti"] = {
	target   = "min",
    },
    ["mese"] = {
	target   = "month",
    },
    ["months"] = {
	target   = "month",
    },
    ["mesi"] = {
	target   = "month",
    },
    ["Myr"] = {
	target   = "million year",
    },
    ["myr"] = {
	target   = "million year",
    },
    ["ora"] = {
	target   = "h",
    },
    ["ore"] = {
	target   = "h",
    },
    ["secondo"] = {
	target   = "s",
    },
    ["secondi"] = {
	target   = "s",
    },
    ["secolo"] = {
	target   = "century",
    },
    ["secoli"] = {
	target   = "century",
    },
    ["settimana"] = {
	target   = "wk",
    },
    ["settimane"] = {
	target   = "wk",
    },
    ["short billion year"] = {
	target   = "milliard year",
    },
    ["short trillion year"] = {
	target   = "long billion year",
    },
    ["thousand million year"] = {
	target   = "milliard year",
    },
    ["tmyr"] = {
	target   = "milliard year",
    },
    ["tryr"] = {
	target   = "long billion year",
    },
    ["tyr"] = {
	target   = "millennium",
    },
    ["week"] = {
	target   = "wk",
    },
    ["yr"] = {
	target   = "year",
    },
    ["cm/h"] = {
	name1    = "centimetro all'ora",
	name2    = "centimetri all'ora",
	symbol   = "cm/h",
	utype    = "velocità",
	scale    = 2.7777777777777775e-6,
	default  = "in/h",
	link     = "Metro al secondo",
    },
    ["cm/s"] = {
	name1    = "centimetro al secondo",
	name2    = "centimetri al secondo",
	symbol   = "cm/s",
	utype    = "velocità",
	scale    = 0.01,
	default  = "in/s",
	link     = "Metro al secondo",
    },
    ["cm/year"] = {
	name1    = "centimetro all'anno",
	name2    = "centimetri all'anno",
	symbol   = "cm/year",
	utype    = "velocità",
	scale    = 3.168873850681143e-10,
	default  = "in/year",
    },
    ["foot/s"] = {
	name1    = "piede al secondo",
	name2    = "piedi al secondo",
	symbol   = "ft/s",
	utype    = "velocità",
	scale    = 0.3048,
	default  = "m/s",
    },
    ["ft/min"] = {
	name1    = "piede al minuto",
	name2    = "piedi al minuto",
	symbol   = "ft/min",
	utype    = "velocità",
	scale    = 0.00508,
	default  = "m/min",
    },
    ["furlong per fortnight"] = {
	name2    = "furlongs per fortnight",
	symbol   = "furlong per fortnight",
	usename  = 1,
	utype    = "velocità",
	scale    = 0.00016630952380952381,
	default  = "km/h",
    },
    ["in/h"] = {
	name1    = "pollice all'ora",
	name2    = "pollici all'ora",
	symbol   = "in/h",
	utype    = "velocità",
	scale    = 7.0555555555555559e-6,
	default  = "cm/h",
	link     = "Pollice (unità di misura)",
    },
    ["in/s"] = {
	name1    = "pollice al secondo",
	name2    = "pollici al secondo",
	symbol   = "in/s",
	utype    = "velocità",
	scale    = 0.0254,
	default  = "cm/s",
	link     = "Pollice (unità di misura)",
    },
    ["in/year"] = {
	name1    = "pollice all'anno",
	name2    = "pollici all'anno",
	symbol   = "in/year",
	utype    = "velocità",
	scale    = 8.0489395807301024e-10,
	default  = "cm/year",
	link     = "Ordini di grandezza (velocità)",
    },
    ["isp"] = {
	name1    = "secondo",
	name2    = "secondi",
	symbol   = "s",
	utype    = "velocità",
	scale    = 9.80665,
	default  = "km/s",
	link     = "Impulso specifico",
    },
    ["km/d"] = {
	name1    = "chilometro al giorno",
	name2    = "chilometri al giorno",
	symbol   = "km/d",
	utype    = "velocità",
	scale    = 1.1574074074074074e-2,
	default  = "mi/d",
	link     = "Ordini di grandezza (velocità)",
    },
    ["km/h"] = {
	name1    = "chilometro all'ora",
	name2    = "chilometri all'ora",
	symbol   = "km/h",
	utype    = "velocità",
	scale    = 0.27777777777777779,
	default  = "mph",
	link     = "Chilometro orario",
    },
    ["km/s"] = {
	name1    = "chilometro al secondo",
	name2    = "chilometri al secondo",
	symbol   = "km/s",
	utype    = "velocità",
	scale    = 1000,
	default  = "mi/s",
	link     = "Metro al secondo",
    },
    ["kn"] = {
	name1    = "nodo",
	name2    = "nodi",
	symbol   = "kn",
	utype    = "velocità",
	scale    = 0.51444444444444448,
	default  = "km/h",
	link     = "Nodo (unità di misura)",
    },
    ["kNs/kg"] = {
	symbol   = "kN&#8209;s/kg",
	utype    = "velocità",
	scale    = 1000,
	default  = "isp",
	link     = "Impulso specifico",
    },
    ["m/min"] = {
	name1    = "metro al minuto",
	name2    = "metri al minuto",
	symbol   = "m/min",
	utype    = "velocità",
	scale    = 0.016666666666666666,
	default  = "ft/min",
	link     = "Metro al secondo",
    },
    ["m/s"] = {
	name1    = "metro al secondo",
	name2    = "metri al secondo",
	symbol   = "m/s",
	utype    = "velocità",
	scale    = 1,
	default  = "ft/s",
    },
    ["c0"] = {
	name1    = "velocità della luce",
	symbol   = "''c''<sub>0</sub>",
	utype    = "velocità",
	scale    = 299792458,
	default  = "m/s",
    },
    ["Mach"] = {
	symbol   = "Mach",
	utype    = "velocità",
	builtin  = "mach",
	scale    = 0,
	iscomplex= true,
	default  = "km/h mph",
	link     = "Numero di Mach",
    },
    ["mi/d"] = {
	name1    = "miglio al giorno",
	name2    = "miglia al giorno",
	symbol   = "mi/d",
	utype    = "velocità",
	scale    = 1.8626666666666667e-2,
	default  = "km/d",
	link     = "Ordini di grandezza (velocità)",
    },
    ["mi/s"] = {
	name1    = "miglio al secondo",
	name2    = "miglia al secondo",
	symbol   = "mi/s",
	utype    = "velocità",
	scale    = 1609.344,
	default  = "km/s",
	link     = "Miglio (unità di misura)",
    },
    ["mm/h"] = {
	name1    = "millimetro all'ora",
	name2    = "millimetri all'ora",
	symbol   = "mm/h",
	utype    = "velocità",
	scale    = 2.7777777777777781e-7,
	default  = "in/h",
	link     = "Metro al secondo",
    },
    ["mph"] = {
	name1    = "miglio all'ora",
	name2    = "miglia all'ora",
	symbol   = "mph",
	utype    = "velocità",
	scale    = 0.44704,
	default  = "km/h",
	link     = "Miglio orario",
    },
    ["Ns/kg"] = {
	symbol   = "N-s/kg",
	utype    = "velocità",
	scale    = 1,
	default  = "isp",
	link     = "Impulso specifico",
    },
    ["si tsfc"] = {
	symbol   = "g/(kN⋅s)",
	utype    = "velocità",
	scale    = 9.9999628621379242e-7,
	invert   = -1,
	iscomplex= true,
	default  = "tsfc",
    },
    ["tsfc"] = {
	symbol   = "lb/(lbf⋅h)",
	utype    = "velocità",
	scale    = 2.832545036049801e-5,
	invert   = -1,
	iscomplex= true,
	default  = "si tsfc",
    },
    ["cm/y"] = {
	target   = "cm/year",
    },
    ["cm/yr"] = {
	target   = "cm/year",
    },
    ["ft/s"] = {
	target   = "foot/s",
    },
    ["in/y"] = {
	target   = "in/year",
    },
    ["in/yr"] = {
	target   = "in/year",
    },
    ["knot"] = {
	target   = "kn",
    },
    ["km:h"] = {
	target   = "km/h",
    },
    ["kmh"] = {
	target   = "km/h",
    },
    ["knots"] = {
	target   = "kn",
    },
    ["kts"] = {
	target   = "kn",
    },
    ["mi:h"] = {
	target   = "mph",
    },
    ["m:s"] = {
	target   = "m/s",
    },
    ["miglio orario"] = {
	target   = "mph",
    },
    ["miglia orarie"] = {
	target   = "mph",
    },
    ["nodo"] = {
	target   = "kn",
    },
    ["nodi"] = {
	target   = "kn",
    },
    ["kph"] = {
	target   = "km/h",
    },
    ["mi/h"] = {
	target   = "mph",
    },
    ["ft:s"] = {
	target   = "foot/s",
    },
    ["mm/s"] = {
	per      = { "mm", "s" },
	utype    = "velocità",
	default  = "in/s",
	link     = "Metro al secondo",
    },
    ["-12USoz(mL)serve"] = {
	name1    = "12&nbsp;US&nbsp;fl&nbsp;oz (355&nbsp;mL) serving",
	symbol   = "12&nbsp;US&nbsp;fl&nbsp;oz serving",
	utype    = "volume",
	scale    = 0.00035488235475000004,
	default  = "mL",
    },
    ["-12USoz(ml)serve"] = {
	name1    = "12&nbsp;US&nbsp;fl&nbsp;oz (355&nbsp;ml) serving",
	symbol   = "12&nbsp;US&nbsp;fl&nbsp;oz serving",
	utype    = "volume",
	scale    = 0.00035488235475000004,
	default  = "ml",
    },
    ["-12USozserve"] = {
	symbol   = "12&nbsp;US&nbsp;fl&nbsp;oz serving",
	utype    = "volume",
	scale    = 0.00035488235475000004,
	default  = "mL",
    },
    ["piede acro"] = {
	name1    = "piede acro",
	symbol   = "ac&bsp;ft",
	utype    = "volume",
	scale    = 1233.48183754752,
	default  = "m3",
	link     = "Volume#Misure di volume: USA",
    },
    ["AUtbsp"] = {
	name1    = "cucchiaio australiano",
	symbol   = "AU&nbsp;tbsp",
	utype    = "volume",
	scale    = 0.000020,
	default  = "ml",
	link     = "Cucchiaio da tavola",
    },
    ["Bcuft"] = {
	name1    = "billion cubic foot",
	name2    = "billion cubic feet",
	symbol   = "billion cu&nbsp;ft",
	utype    = "volume",
	scale    = 28316846.592,
	default  = "Gl",
	link     = "Piede cubo",
    },
    ["bdft"] = {
	name1    = "board foot",
	name2    = "board feet",
	symbol   = "bd&nbsp;ft",
	utype    = "volume",
	scale    = 0.0023597372167,
	default  = "m3",
    },
    ["cc"] = {
	name1    = "centimetro cubo",
	name2    = "centimetri cubi",
	symbol   = "cc",
	utype    = "volume",
	scale    = 0.000001,
	default  = "cuin",
    },
    ["CID"] = {
	name1    = "pollice cubo",
	name2    = "pollici cubi",
	symbol   = "cu&nbsp;in",
	utype    = "volume",
	scale    = 0.000016387064,
	default  = "cc",
    },
    ["cord"] = {
	symbol   = "cord",
	utype    = "volume",
	scale    = 3.624556363776,
	default  = "m3",
    },
    ["cuft"] = {
	name1    = "piede cubo",
	name2    = "piedi cubi",
	symbol   = "cu&nbsp;ft",
	utype    = "volume",
	scale    = 0.028316846592,
	default  = "m3",
    },
    ["cuin"] = {
	name1    = "pollice cubo",
	name2    = "pollici cubi",
	symbol   = "cu&nbsp;in",
	utype    = "volume",
	scale    = 0.000016387064,
	default  = "cm3",
    },
    ["cumi"] = {
	name1    = "miglio cubo",
	name2    = "miglia cube",
	symbol   = "cu&nbsp;mi",
	utype    = "volume",
	scale    = 4168181825.440579584,
	default  = "km3",
    },
    ["cuyd"] = {
	name1    = "iarda cubica",
	name2    = "iarde cubiche",
	symbol   = "cu&nbsp;yd",
	utype    = "volume",
	scale    = 0.764554857984,
	default  = "m3",
    },
    ["firkin"] = {
	symbol   = "firkin",
	usename  = 1,
	utype    = "volume",
	scale    = 0.04091481,
	default  = "l impgal USgal",
    },
    ["Goilbbl"] = {
	name1    = "bilione di barili",
	name2    = "bilioni di barili",
	symbol   = "Gbbl",
	utype    = "volume",
	scale    = 158987294.928,
	default  = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3",
	link     = "Barile (unità di misura)#Barile di petrolio",
    },
    ["gr water"] = {
	name1    = "grains water",
	symbol   = "gr H<sub>2</sub>O",
	utype    = "volume",
	scale    = 0.00000006479891,
	default  = "cm3",
	link     = "Grano (unità di misura)",
    },
    ["grt"] = {
	name1    = "tonnellata di stazza",
	name2    = "tonnellate di stazza",
	symbol   = "grt",
	utype    = "volume",
	scale    = 2.8316846592,
	default  = "m3",
    },
    ["impbbl"] = {
	name1    = "barile imperiale",
	symbol   = "imp&nbsp;bbl",
	utype    = "volume",
	scale    = 0.16365924,
	default  = "m3",
	link     = "Barile (unità di misura)",
    },
    ["impbsh"] = {
	name1    = "bushel imperiale",
	name2    = "bushel imperiali",
	symbol   = "imp&nbsp;bsh",
	utype    = "volume",
	scale    = 0.03636872,
	default  = "m3",
	link     = "Bushel",
    },
    ["impbu"] = {
	name1    = "bushel imperiale",
	name2    = "bushel imperiali",
	symbol   = "imp&nbsp;bu",
	utype    = "volume",
	scale    = 0.03636872,
	default  = "m3",
	link     = "Bushel",
    },
    ["impgal"] = {
	name1    = "gallone imperiale",
	name2    = "galloni imperiali",
	symbol   = "imp&nbsp;gal",
	utype    = "volume",
	scale    = 0.00454609,
	default  = "l",
	link     = "Gallone#Gallone imperiale",
    },
    ["impgi"] = {
	name1    = "gill",
	symbol   = "gi",
	utype    = "volume",
	scale    = 0.0001420653125,
	default  = "ml",
	link     = "Sistema imperiale britannico#Volume per liquidi (capacità liquida)",
    },
    ["impkenning"] = {
	name1    = "imperial kenning",
	symbol   = "kenning",
	utype    = "volume",
	scale    = 0.01818436,
	default  = "l",
    },
    ["impoz"] = {
	name1    = "oncia liquida imperiale",
	name2    = "once liquide imperiali",
	symbol   = "imp&nbsp;fl&nbsp;oz",
	utype    = "volume",
	scale    = 0.0000284130625,
	default  = "ml",
	link     = "Oncia liquida",
    },
    ["imppk"] = {
	name1    = "imperial peck",
	symbol   = "pk",
	utype    = "volume",
	scale    = 0.00909218,
	default  = "l",
    },
    ["imppt"] = {
	name1    = "pinta imperiale",
	name2    = "pinte imperiali",
	symbol   = "imp&nbsp;pt",
	utype    = "volume",
	scale    = 0.00056826125,
	default  = "l",
	link     = "Pinta (unità di misura)#Pinta imperiale",
    },
    ["impqt"] = {
	name1    = "quarto imperiale",
	name2    = "quarti imperiali",
	symbol   = "imp&nbsp;qt",
	utype    = "volume",
	scale    = 0.0011365225,
	default  = "ml",
	link     = "Quarto (unità di misura)",
	customary= 3,
    },
    ["kilderkin"] = {
	symbol   = "kilderkin",
	usename  = 1,
	utype    = "volume",
	scale    = 0.08182962,
	default  = "l",
    },
    ["koilbbl"] = {
	name1    = "migliaio di barili",
	name2    = "migliaia di barili",
	symbol   = "kbbl",
	utype    = "volume",
	scale    = 158.987294928,
	default  = "v * 1.58987294928 < 10 ! ! e3 ! m3",
	link     = "Barile (unità di misura)#Barile di petrolio",
    },
    ["L"] = {
	_name1   = "litro",
	_name2   = "litri",
	_symbol  = "L",
	utype    = "volume",
	scale    = 0.001,
	prefixes = 1,
	default  = "impgal USgal",
	link     = "Litro",
    },
    ["l"] = {
	_name1   = "litro",
	_name2   = "litri",
	_symbol  = "l",
	utype    = "volume",
	scale    = 0.001,
	prefixes = 1,
	default  = "impgal USgal",
	link     = "Litro",
    },
    ["m3"] = {
	_name1   = "metro cubo",
	_name2   = "metri cubi",
	_symbol  = "m³",
	utype    = "volume",
	scale    = 1,
	prefixes = 3,
	default  = "cuft",
	link     = "Metro cubo",
    },
    ["Mbbl"] = {
	name1    = "migliaio di barili",
	name2    = "migliaia di barili",
	symbol   = "Mbbl",
	utype    = "volume",
	scale    = 158.987294928,
	default  = "v * 1.58987294928 < 10 ! e3 ! ! m3",
	link     = "Barile (unità di misura)#Barile di petrolio",
    },
    ["MMoilbbl"] = {
	name1    = "milione di barili",
	name2    = "milioni di barili",
	symbol   = "MMbbl",
	utype    = "volume",
	scale    = 158987.294928,
	default  = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
	link     = "Barile (unità di misura)#Barile di petrolio",
    },
    ["Moilbbl"] = {
	name1    = "milione di barili",
	name2    = "milioni di barili",
	symbol   = "Mbbl",
	utype    = "volume",
	scale    = 158987.294928,
	default  = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3",
	link     = "Barile (unità di misura)#Barile di petrolio",
    },
    ["MTON"] = {
	name1    = "measurement ton",
	symbol   = "MTON",
	utype    = "volume",
	scale    = 1.13267386368,
	default  = "m3",
    },
    ["MUSgal"] = {
	name1    = "milione di galloni statunitensi",
	name2    = "milioni di galloni statunitensi",
	symbol   = "million US&nbsp;gal",
	utype    = "volume",
	scale    = 3785.411784,
	default  = "Ml",
	link     = "Gallone#Gallone americano",
    },
    ["oilbbl"] = {
	name1    = "barile",
	name2    = "barili",
	symbol   = "bbl",
	utype    = "volume",
	scale    = 0.158987294928,
	default  = "m3",
	link     = "Barile (unità di misura)#Barile di petrolio",
    },
    ["stere"] = {
	name1    = "stero",
	name2    = "steri",
	symbol   = "stere",
	usename  = 1,
	utype    = "volume",
	scale    = 1,
	default  = "cuft",
    },
    ["Toilbbl"] = {
	name1    = "trillione di barili",
	name2    = "trilioni di barili",
	symbol   = "Tbbl",
	utype    = "volume",
	scale    = 158987294928,
	default  = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3",
	link     = "Barile (unità di misura)#Barile di petrolio",
    },
    ["USbbl"] = {
	name1    = "barile di birra americano",
	symbol   = "US&nbsp;bbl",
	utype    = "volume",
	scale    = 0.119240471196,
	default  = "l",
	link     = "Barile (unità di misura)",
    },
    ["USbeerbbl"] = {
	name1    = "barile di birra americano",
	symbol   = "US&nbsp;bbl",
	utype    = "volume",
	scale    = 0.117347765304,
	default  = "l",
	link     = "Barile (unità di misura)",
    },
    ["USbsh"] = {
	name1    = "bushel US",
	symbol   = "US&nbsp;bsh",
	utype    = "volume",
	scale    = 0.03523907016688,
	default  = "l",
	link     = "Bushel",
    },
    ["USbu"] = {
	name1    = "bushel US",
	symbol   = "US&nbsp;bu",
	utype    = "volume",
	scale    = 0.03523907016688,
	default  = "l",
	link     = "Bushel",
    },
    ["USdrybbl"] = {
	name1    = "barile secco US",
	symbol   = "US&nbsp;dry&nbsp;bbl",
	utype    = "volume",
	scale    = 0.11562819898508,
	default  = "m3",
	link     = "Barile (unità di misura)",
    },
    ["USdrygal"] = {
	name1    = "gallone secca americano",
	name2    = "galloni secchi americani",
	symbol   = "US&nbsp;dry&nbsp;gal",
	utype    = "volume",
	scale    = 0.00440488377086,
	default  = "l",
	link     = "Gallone#Gallone americano",
    },
    ["USdrypt"] = {
	name1    = "pinta secca americana",
	name2    = "pinte secche americane",
	symbol   = "US&nbsp;dry&nbsp;pt",
	utype    = "volume",
	scale    = 0.0005506104713575,
	default  = "ml",
	link     = "Pinta (unità di misura)",
    },
    ["USdryqt"] = {
	name1    = "quarto secco americano",
	name2    = "quarti secchi americani",
	symbol   = "US&nbsp;dry&nbsp;qt",
	utype    = "volume",
	scale    = 0.001101220942715,
	default  = "ml",
	link     = "Quarto (unità di misura)",
    },
    ["USflgal"] = {
	name1    = "gallone americano",
	name2    = "galloni americani",
	symbol   = "US&nbsp;fl&nbsp;gal",
	utype    = "volume",
	scale    = 0.003785411784,
	default  = "l",
	link     = "Gallone",
    },
    ["USgal"] = {
	name1    = "gallone americano",
	name2    = "galloni americani",
	symbol   = "US&nbsp;gal",
	utype    = "volume",
	scale    = 0.003785411784,
	default  = "l",
	link     = "Gallone#Gallone americano",
    },
    ["USgi"] = {
	name1    = "gill",
	symbol   = "gi",
	utype    = "volume",
	scale    = 0.0001182941183,
	default  = "ml",
	link     = "Conversione delle unità di misura#Unità di volume",
    },
    ["USkenning"] = {
	name1    = "kenning (americano)",
	symbol   = "US&nbsp;kenning",
	utype    = "volume",
	scale    = 0.01761953508344,
	default  = "l impgal",
    },
    ["USmin"] = {
	name1    = "minim (americano)",
	symbol   = "US&nbsp;min",
	utype    = "volume",
	scale    = 0.000000061611519921875,
	default  = "ml",
	link     = "Conversione delle unità di misura#Unità di volume",
    },
    ["USoz"] = {
	name1    = "oncia liquida americana",
	symbol   = "US&nbsp;fl&nbsp;oz",
	utype    = "volume",
	scale    = 0.0000295735295625,
	default  = "ml",
	link     = "Oncia liquida",
    },
    ["USpk"] = {
	name1    = "peck americano",
	symbol   = "US&nbsp;pk",
	utype    = "volume",
	scale    = 0.00880976754172,
	default  = "l",
	link     = "Conversione delle unità di misura#Unità di volume",
    },
    ["USpt"] = {
	name1    = "pinta americana",
	name2    = "pinte americane",
	symbol   = "US&nbsp;pt",
	utype    = "volume",
	scale    = 0.000473176473,
	default  = "l",
	link     = "Pinta (unità di misura)",
    },
    ["USqt"] = {
	name1    = "quarto americano",
	name2    = "quarti americani",
	symbol   = "US&nbsp;qt",
	utype    = "volume",
	scale    = 0.000946352946,
	default  = "ml",
	link     = "Quarto (unità di misura)",
	customary= 1,
    },
    ["USquart"] = {
	name1    = "quarto americano",
	name2    = "quarti americani",
	symbol   = "US&nbsp;qt",
	utype    = "volume",
	scale    = 0.000946352946,
	default  = "ml",
	link     = "Quarto (unità di misura)",
    },
    ["UStbsp"] = {
	name1    = "cucchiaio",
	name2    = "cucchiai",
	symbol   = "US&nbsp;tbsp",
	utype    = "volume",
	scale    = 1.4786764781250001e-5,
	default  = "ml",
	link     = "Cucchiaio da tavola",
    },
    ["*U.S.drygal"] = {
	target   = "USdrygal",
	link     = "Gallone",
	customary= 2,
    },
    ["*U.S.gal"] = {
	target   = "USgal",
	default  = "L",
	customary= 2,
    },
    ["+USdrygal"] = {
	target   = "USdrygal",
	link     = "Gallone",
	customary= 1,
    },
    ["+usfloz"] = {
	target   = "USoz",
	customary= 1,
    },
    ["+USgal"] = {
	target   = "USgal",
	customary= 1,
    },
    ["+USoz"] = {
	target   = "USoz",
	customary= 1,
    },
    ["@impgal"] = {
	target   = "impgal",
	link     = "Gallone",
	customary= 3,
    },
    ["ac ft"] = {
	target   = "piede acro",
    },
    ["acre feet"] = {
	target   = "piede acro",
    },
    ["acre-feet"] = {
	target   = "piede acro",
    },
    ["acre-ft"] = {
	target   = "piede acro",
    },
    ["acre.foot"] = {
	target   = "piede acro",
    },
    ["acre.ft"] = {
	target   = "piede acro",
    },
    ["acre⋅ft"] = {
	target   = "piede acro",
    },
    ["board feet"] = {
	target   = "bdft",
    },
    ["board foot"] = {
	target   = "bdft",
    },
    ["bushels"] = {
	target   = "USbsh",
    },
    ["cid"] = {
	target   = "CID",
    },
    ["ft3"] = {
	target   = "cuft",
    },
    ["cufoot"] = {
	target   = "cuft",
    },
    ["foot3"] = {
	target   = "cuft",
    },
    ["gal"] = {
	target   = "USgal",
    },
    ["gallon"] = {
	shouldbe = "Usare %{USgal%} galloni americani o  %{impgal%} per galloni imperiali (non %{gallon%})",
    },
    ["gallons"] = {
	shouldbe = "Usare %{USgal%}  galloni americani o %{impgal%} per galloni imperiali (non %{gallons%})",
    },
    ["Gcuft"] = {
	target   = "e9cuft",
    },
    ["impfloz"] = {
	target   = "impoz",
    },
    ["Impgal"] = {
	target   = "impgal",
    },
    ["in3"] = {
	target   = "cuin",
	symbol   = "in³",
    },
    ["kcuft"] = {
	target   = "e3cuft",
    },
    ["kcum"] = {
	target   = "e3m3",
    },
    ["km³"] = {
	target   = "km3",
    },
    ["liter"] = {
	target   = "L",
    },
    ["liters"] = {
	target   = "L",
    },
    ["litro"] = {
	target   = "L",
    },
    ["litri"] = {
	target   = "L",
    },
    ["litre"] = {
	target   = "L",
    },
    ["litres"] = {
	target   = "L",
    },
    ["Mcuft"] = {
	target   = "e6cuft",
    },
    ["Mcum"] = {
	target   = "e6m3",
    },
    ["Mft3"] = {
	target   = "e6cuft",
    },
    ["mi3"] = {
	target   = "cumi",
    },
    ["m³"] = {
	target   = "m3",
    },
    ["mc"] = {
	target   = "m3",
    },
    ["Pcuft"] = {
	target   = "e15cuft",
    },
    ["pt"] = {
	shouldbe = "Usare %{USpt%} per pinte statunitensi o %{imppt%} per pinte imperiali, non %{pt%}",
    },
    ["qt"] = {
	shouldbe = "Usare %{USqt%} per quarti statunitensi o  %{impqt%} per quarti imperiali, non %{qt%}",
    },
    ["Tcuft"] = {
	target   = "e12cuft",
    },
    ["Tft3"] = {
	target   = "e12cuft",
    },
    ["U.S.bbl"] = {
	target   = "USbbl",
    },
    ["U.S.beerbbl"] = {
	target   = "USbeerbbl",
    },
    ["U.S.bsh"] = {
	target   = "USbsh",
    },
    ["U.S.bu"] = {
	target   = "USbu",
    },
    ["U.S.drybbl"] = {
	target   = "USdrybbl",
    },
    ["U.S.drygal"] = {
	target   = "USdrygal",
    },
    ["U.S.drypt"] = {
	target   = "USdrypt",
    },
    ["U.S.dryqt"] = {
	target   = "USdryqt",
    },
    ["U.S.flgal"] = {
	target   = "USflgal",
    },
    ["U.S.floz"] = {
	target   = "USoz",
    },
    ["U.S.gal"] = {
	target   = "USgal",
	default  = "L",
    },
    ["u.s.gal"] = {
	target   = "USgal",
	default  = "L",
    },
    ["U.S.gi"] = {
	target   = "USgi",
    },
    ["U.S.kenning"] = {
	target   = "USkenning",
    },
    ["U.S.oz"] = {
	target   = "USoz",
    },
    ["U.S.pk"] = {
	target   = "USpk",
    },
    ["U.S.pt"] = {
	target   = "USpt",
    },
    ["U.S.qt"] = {
	target   = "USqt",
	default  = "L",
	customary= 2,
    },
    ["usbbl"] = {
	target   = "USbbl",
    },
    ["usbeerbbl"] = {
	target   = "USbeerbbl",
    },
    ["usbsh"] = {
	target   = "USbsh",
    },
    ["usbu"] = {
	target   = "USbu",
    },
    ["usdrybbl"] = {
	target   = "USdrybbl",
    },
    ["usdrygal"] = {
	target   = "USdrygal",
    },
    ["usdrypt"] = {
	target   = "USdrypt",
    },
    ["usdryqt"] = {
	target   = "USdryqt",
    },
    ["USfloz"] = {
	target   = "USoz",
    },
    ["usfloz"] = {
	target   = "USoz",
    },
    ["USGAL"] = {
	target   = "USgal",
    },
    ["usgal"] = {
	target   = "USgal",
    },
    ["usgi"] = {
	target   = "USgi",
    },
    ["uskenning"] = {
	target   = "USkenning",
    },
    ["usoz"] = {
	target   = "USoz",
    },
    ["uspk"] = {
	target   = "USpk",
    },
    ["uspt"] = {
	target   = "USpt",
    },
    ["usqt"] = {
	target   = "USqt",
    },
    ["yd3"] = {
	target   = "cuyd",
    },
    ["cuft/sqmi"] = {
	per      = { "cuft", "sqmi" },
	utype    = "volume per unità di area",
	default  = "m3/km2",
    },
    ["m3/ha"] = {
	name1    = "metro cubo per ettaro",
	name2    = "metri cubi per ettaro",
	symbol   = "m³/ha",
	utype    = "volume per unità di area",
	scale    = 0.0001,
	default  = "USbu/acro",
	link     = "Ettaro",
    },
    ["m3/km2"] = {
	per      = { "m3", "km2" },
	utype    = "volume per unità di area",
	default  = "cuft/sqmi",
    },
    ["U.S.gal/acro"] = {
	per      = { "U.S.gal", "acro" },
	utype    = "volume per unità di area",
	default  = "m3/km2",
    },
    ["USbu/acro"] = {
	name2    = "US bushels per acro",
	symbol   = "US bushel per acro",
	usename  = 1,
	utype    = "volume per unità di area",
	scale    = 8.7077638761350888e-6,
	default  = "m3/ha",
	link     = "Bushel",
    },
    ["USgal/acro"] = {
	per      = { "USgal", "acro" },
	utype    = "volume per unità di area",
	default  = "m3/km2",
    },
    ["cuyd/mi"] = {
	per      = { "cuyd", "mi" },
	utype    = "volume per unità di lunghezza",
	default  = "m3/km",
    },
    ["m3/km"] = {
	per      = { "m3", "km" },
	utype    = "volume per unità di lunghezza",
	default  = "cuyd/mi",
    },
    ["mich"] = {
	combination= { "ch", "mi" },
	multiple = { 80 },
	utype    = "lunghezza",
    },
    ["michlk"] = {
	combination= { "chlk", "mi" },
	multiple = { 80 },
	utype    = "lunghezza",
    },
    ["michainlk"] = {
	combination= { "chainlk", "mi" },
	multiple = { 80 },
	utype    = "lunghezza",
    },
    ["miydftin"] = {
	combination= { "in", "ft", "yd", "mi" },
	multiple = { 12, 3, 1760 },
	utype    = "lunghezza",
    },
    ["mift"] = {
	combination= { "ft", "mi" },
	multiple = { 5280 },
	utype    = "lunghezza",
    },
    ["ydftin"] = {
	combination= { "in", "ft", "yd" },
	multiple = { 12, 3 },
	utype    = "lunghezza",
    },
    ["ydft"] = {
	combination= { "ft", "yd" },
	multiple = { 3 },
	utype    = "lunghezza",
    },
    ["ftin"] = {
	combination= { "in", "ft" },
	multiple = { 12 },
	utype    = "lunghezza",
    },
    ["footin"] = {
	combination= { "in", "foot" },
	multiple = { 12 },
	utype    = "lunghezza",
    },
    ["handin"] = {
	combination= { "in", "hand" },
	multiple = { 4 },
	utype    = "lunghezza",
    },
    ["lboz"] = {
	combination= { "oz", "lb" },
	multiple = { 16 },
	utype    = "massa",
    },
    ["stlb"] = {
	combination= { "lb", "st" },
	multiple = { 14 },
	utype    = "massa",
    },
    ["stlboz"] = {
	combination= { "oz", "lb", "st" },
	multiple = { 16, 14 },
	utype    = "massa",
    },
    ["st and lb"] = {
	combination= { "lb", "st" },
	multiple = { 14 },
	utype    = "massa",
    },
    ["L/100 km mpgimp"] = {
	combination= { "L/100 km", "mpgimp" },
	utype    = "efficienza del carburante",
    },
    ["l/100 km mpgimp"] = {
	combination= { "l/100 km", "mpgimp" },
	utype    = "efficienza del carburante",
    },
    ["L/100 km mpgUS"] = {
	combination= { "L/100 km", "mpgus" },
	utype    = "efficienza del carburante",
    },
    ["L/100 km mpgus"] = {
	combination= { "L/100 km", "mpgus" },
	utype    = "efficienza del carburante",
    },
    ["l/100 km mpgus"] = {
	combination= { "l/100 km", "mpgus" },
	utype    = "efficienza del carburante",
    },
    ["mpgimp L/100 km"] = {
	combination= { "mpgimp", "L/100 km" },
	utype    = "efficienza del carburante",
    },
    ["GN LTf"] = {
	combination= { "GN", "-LTf" },
	utype    = "forza",
    },
    ["GN LTf STf"] = {
	combination= { "GN", "-LTf", "-STf" },
	utype    = "forza",
    },
    ["GN STf"] = {
	combination= { "GN", "-STf" },
	utype    = "forza",
    },
    ["GN STf LTf"] = {
	combination= { "GN", "-STf", "-LTf" },
	utype    = "forza",
    },
    ["kN LTf"] = {
	combination= { "kN", "-LTf" },
	utype    = "forza",
    },
    ["kN LTf STf"] = {
	combination= { "kN", "-LTf", "-STf" },
	utype    = "forza",
    },
    ["kN STf"] = {
	combination= { "kN", "-STf" },
	utype    = "forza",
    },
    ["kN STf LTf"] = {
	combination= { "kN", "-STf", "-LTf" },
	utype    = "forza",
    },
    ["LTf STf"] = {
	combination= { "-LTf", "-STf" },
	utype    = "forza",
    },
    ["MN LTf"] = {
	combination= { "MN", "-LTf" },
	utype    = "forza",
    },
    ["MN LTf STf"] = {
	combination= { "MN", "-LTf", "-STf" },
	utype    = "forza",
    },
    ["MN STf"] = {
	combination= { "MN", "-STf" },
	utype    = "forza",
    },
    ["MN STf LTf"] = {
	combination= { "MN", "-STf", "-LTf" },
	utype    = "forza",
    },
    ["STf LTf"] = {
	combination= { "-STf", "-LTf" },
	utype    = "forza",
    },
    ["LT ST t"] = {
	combination= { "lt", "-ST", "t" },
	utype    = "massa",
    },
    ["LT t ST"] = {
	combination= { "lt", "t", "-ST" },
	utype    = "massa",
    },
    ["ST LT t"] = {
	combination= { "-ST", "lt", "t" },
	utype    = "massa",
    },
    ["ST t LT"] = {
	combination= { "-ST", "t", "lt" },
	utype    = "massa",
    },
    ["t LT ST"] = {
	combination= { "t", "lt", "-ST" },
	utype    = "massa",
    },
    ["ton"] = {
	combination= { "LT", "ST" },
	utype    = "massa",
    },
    ["kPa kg/cm2"] = {
	combination= { "kPa", "kgf/cm2" },
	utype    = "pressione",
    },
    ["kPa lb/in2"] = {
	combination= { "kPa", "-lb/in2" },
	utype    = "pressione",
    },
    ["floz"] = {
	combination= { "impoz", "USoz" },
	utype    = "volume",
    },
}

---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above).   --
---------------------------------------------------------------------------
local default_exceptions = {
	-- Prefixed units with a default different from that of the base unit.
	-- Each key item is a prefixed symbol (unitcode for engineering notation).
	["cm²"] = "sqin",
	["dm²"] = "sqin",
	["e3acro"] = "km2",
	["e3m2"] = "e6sqft",
	["e6acro"] = "km2",
	["e6ha"] = "e6acro",
	["e6km2"] = "e6sqmi",
	["e6m2"] = "e6sqft",
	["e6sqft"] = "v * 9.290304 < 100 ! e3 ! e6 ! m2",
	["e6sqmi"] = "e6km2",
	["hm²"] = "acro",
	["km²"] = "sqmi",
	["mm²"] = "sqin",
	["aJ"] = "eV",
	["e3BTU"] = "MJ",
	["e6BTU"] = "GJ",
	["EJ"] = "kWh",
	["fJ"] = "keV",
	["GJ"] = "kWh",
	["MJ"] = "kWh",
	["PJ"] = "kWh",
	["pJ"] = "MeV",
	["TJ"] = "kWh",
	["YJ"] = "kWh",
	["yJ"] = "μeV",
	["ZJ"] = "kWh",
	["zJ"] = "meV",
	["e12cuft/a"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/a",
	["e12cuft/d"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/d",
	["e12m3/a"] = "Tcuft/a",
	["e12m3/d"] = "Tcuft/d",
	["e3cuft/a"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/a",
	["e3cuft/d"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/d",
	["e3cuft/s"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/s",
	["e3m3/a"] = "v < 28.316846592 ! k ! M ! cuft/a",
	["e3m3/d"] = "v < 28.316846592 ! k ! M ! cuft/d",
	["e3m3/s"] = "v < 28.316846592 ! k ! M ! cuft/s",
	["e3USgal/a"] = "v * 3.785411784 < 1000 ! ! e3 ! m3/a",
	["e6cuft/a"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/a",
	["e6cuft/d"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/d",
	["e6cuft/s"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/s",
	["e6m3/a"] = "v < 28.316846592 ! M ! G ! cuft/a",
	["e6m3/d"] = "v < 28.316846592 ! M ! G ! cuft/d",
	["e6m3/s"] = "v < 28.316846592 ! e6 ! e9 ! cuft/s",
	["e6USgal/a"] = "v * 3.785411784 < 1000 ! e3 ! e6 ! m3/a",
	["e9cuft/a"] = "m3/a",
	["e9cuft/d"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3/d",
	["e9m3/a"] = "v < 28.316846592 ! G ! T ! cuft/a",
	["e9m3/d"] = "v < 28.316846592 ! G ! T ! cuft/d",
	["e9m3/s"] = "v < 28.316846592 ! e9 ! e12 ! cuft/s",
	["e9USgal/a"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/a",
	["e9USgal/s"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/s",
	["nN"] = "gr-f",
	["μN"] = "gr-f",
	["mN"] = "oz-f",
	["am"] = "in",
	["cm"] = "in",
	["dam"] = "ft",
	["dm"] = "in",
	["e12km"] = "e12mi",
	["e12mi"] = "e12km",
	["e3au"] = "ly",
	["e3km"] = "e3mi",
	["e3mi"] = "e3km",
	["e6km"] = "e6mi",
	["e6mi"] = "e6km",
	["e9km"] = "au",
	["e9mi"] = "e9km",
	["Em"] = "mi",
	["fm"] = "in",
	["Gm"] = "mi",
	["hm"] = "ft",
	["km"] = "mi",
	["mm"] = "in",
	["Mm"] = "mi",
	["nm"] = "in",
	["Pm"] = "mi",
	["pm"] = "in",
	["Tm"] = "mi",
	["Ym"] = "mi",
	["ym"] = "in",
	["Zm"] = "mi",
	["zm"] = "in",
	["μm"] = "in",
	["e12lb"] = "v * 4.5359237 < 10 ! Mt ! Gt",
	["e3lb"] = "v * 4.5359237 < 10 ! kg ! t",
	["e3ozt"] = "v * 0.311034768 < 10 ! kg ! t",
	["e3t"] = "LT ST",
	["e6carat"] = "t",
	["e6lb"] = "v * 4.5359237 < 10 ! t ! kilotonne",
	["e6ozt"] = "lb kg",
	["e6ST"] = "Mt",
	["e6t"] = "LT ST",
	["e9lb"] = "v * 4.5359237 < 10 ! kilotonne ! Mt",
	["e9t"] = "LT ST",
	["Gg"] = "lb",
	["kg"] = "lb",
	["mg"] = "gr",
	["Mg"] = "LT ST",
	["ng"] = "gr",
	["μg"] = "gr",
	["mBq"] = "fCi",
	["kBq"] = "nCi",
	["MBq"] = "μCi",
	["GBq"] = "mCi",
	["TBq"] = "Ci",
	["PBq"] = "kCi",
	["EBq"] = "kCi",
	["fCi"] = "mBq",
	["pCi"] = "Bq",
	["nCi"] = "Bq",
	["μCi"] = "kBq",
	["mCi"] = "MBq",
	["kCi"] = "TBq",
	["MCi"] = "PBq",
	["MK"] = "keVT",
	["ns"] = "μs",
	["μs"] = "ms",
	["ms"] = "s",
	["ks"] = "h",
	["Ms"] = "week",
	["Gs"] = "decade",
	["Ts"] = "millennium",
	["Ps"] = "million year",
	["Es"] = "thousand million year",
	["cL"] = "impoz usoz",
	["cm³"] = "cuin",
	["dL"] = "impoz usoz",
	["dl"] = "impoz usoz",
	["mm³"] = "cuin",
	["dm³"] = "cuin",
	["e12cuft"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3",
	["e12impgal"] = "v * 4.54609 < 1000 ! T ! P ! L",
	["e12m3"] = "v < 28.316846592 ! T ! P ! cuft",
	["e12U.S.gal"] = "v * 3.785411784 < 1000 ! T ! P ! L",
	["e12USgal"] = "v * 3.785411784 < 1000 ! T ! P ! L",
	["e15cuft"] = "v * 2.8316846592 < 100 ! e12 ! e15 ! m3",
	["e15m3"] = "Pcuft",
	["e3bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3",
	["e3cuft"] = "v * 2.8316846592 < 100 ! ! e3 ! m3",
	["e3impgal"] = "v * 4.54609 < 1000 ! k ! M ! L",
	["e3m3"] = "v < 28.316846592 ! k ! M ! cuft",
	["e3U.S.gal"] = "v * 3.785411784 < 1000 ! k ! M ! L",
	["e3USgal"] = "v * 3.785411784 < 1000 ! k ! M ! L",
	["e6bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3",
	["e6cuft"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3",
	["e6cuyd"] = "v * 7.64554857984 < 10 ! e3 ! e6 ! m3",
	["e6impgal"] = "v * 4.54609 < 1000 ! M ! G ! L",
	["e6L"] = "USgal",
	["e6m3"] = "v < 28.316846592 ! M ! G ! cuft",
	["e6U.S.gal"] = "v * 3.785411784 < 1000 ! M ! G ! L",
	["e6USgal"] = "v * 3.785411784 < 1000 ! M ! G ! L",
	["e9bdft"] = "v * 0.23597372167 < 100 ! e6 ! e9 ! m3",
	["e9cuft"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3",
	["e9impgal"] = "v * 4.54609 < 1000 ! G ! T ! L",
	["e9m3"] = "v < 28.316846592 ! G ! T ! cuft",
	["e9U.S.gal"] = "v * 3.785411784 < 1000 ! G ! T ! L",
	["e9USgal"] = "v * 3.785411784 < 1000 ! G ! T ! L",
	["GL"] = "cuft",
	["Gl"] = "cuft",
	["kL"] = "cuft",
	["kl"] = "cuft",
	["km³"] = "cumi",
	["mL"] = "impoz usoz",
	["ml"] = "impoz usoz",
	["ML"] = "v < 28.316846592 ! e3 ! e6 ! cuft",
	["Ml"] = "v < 28.316846592 ! e3 ! e6 ! cuft",
	["Tl"] = "cumi",
	["TL"] = "cumi",
	["μl"] = "cuin",
	["μL"] = "cuin",
}

---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above).   --
---------------------------------------------------------------------------
local link_exceptions = {
	-- Prefixed units with a linked article different from that of the base unit.
	-- Each key item is a prefixed symbol (not unitcode).
	["km²"] = "Chilometro quadrato",
	["fm"] = "Femtometro",
	["nm"] = "Nanometro",
	["μm"] = "Micrometro (unità di misura)",
	["km"] = "Chilometro",
	["Mm"] = "Megametro",
	["Gm"] = "Gigametro",
	["Tm"] = "Terametro",
	["kg"] = "Chilogrammo",
	["Mg"] = "Tonnellata",
	["as"] = "Attosecondo",
	["fs"] = "Femtosecondo",
	["ps"] = "Picosecondo",
	["ns"] = "Nanosecondo",
	["μs"] = "Microsecondo",
	["ms"] = "Millisecondo",
	["cm³"] = "Centimetro cubo",
}

---------------------------------------------------------------------------
-- Do not change the data in this table because it is created by running --
-- a script that reads the wikitext from a wiki page (see note above).   --
---------------------------------------------------------------------------
local per_unit_fixups = {
	-- Automatically created per units of form "x/y" may have their unit type
	-- changed, for example, "length/time" is changed to "speed".
	-- Other adjustments can also be specified.
	["/area"] = "per unità di area",
	["/volume"] = "per unità di volume",
	["area/area"] = "area per unità d'area",
	["energia/lunghezza"] = "energia per unità di lunghezza",
	["energia/massa"] = "energia per unità di massa",
	["energia/tempo"] = { utype = "potenza", link = "Potenza (fisica)" },
	["energia/volume"] = "energia per unità di volume",
	["forza/area"] = { utype = "pressione", link = "Pressione" },
	["lunghezza/lunghezza"] = { utype = "pendenza", link = "Pendenza topografica" },
	["lunghezza/tempo"] = { utype = "velocità", link = "Velocità" },
	["lunghezza/tempo/tempo"] = { utype = "accelerazione", link = "Accelerazione" },
	["massa/area"] = { utype = "pressione", multiplier = 9.80665 },
	["massa/lunghezza"] = "densità lineare",
	["massa/massa"] = "concentrazione",
	["massa/potenza"] = "massa per unità di potenza",
	["massa/tempo"] = "massa per unità di tempo",
	["massa/volume"] = { utype = "densità", link = "Densità" },
	["potenza/massa"] = "potenza per unità di massa",
	["potenza/volume"] = "Densità energetica",
	["pressione/lunghezza"] = "gradiente di frattura",
	["velocità/tempo"] = { utype = "accelerazione", link = "Accelerazione" },
	["volume/area"] = "volume per unità di area",
	["volume/lunghezza"] = "volume per unità di lunghezza",
	["volume/tempo"] = "flusso",
}

return {
	all_units = all_units,
	default_exceptions = default_exceptions,
	link_exceptions = link_exceptions,
	per_unit_fixups = per_unit_fixups,
}

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.