Pindad APS-2

Pindad APS-2
Panser APS-2 in a parade
Type	APC
Place of origin	Indonesia
Service history
Used by	Indonesian army
Production history
Designer	Pindad
Manufacturer	Pindad
Unit cost	600 million rupiah (2006), US$83,900 (2022)
Produced	2006
No. built	Unknown
Specifications
Mass	12 ton (maximum)
Crew	15 men
Armor	Monocoque body armor, 8–10 mm
Main armament	12,7 mm heavy machine gun or 40 mm grenade launcher
Engine	Renault MIDR 062045 diesel turbo-charged 6 cylinder inline
Maximum speed	90 km/hour

The Pindad APS-2 or APS-2 (Indonesian: Angkut Personel Sedang-2, lit. 'Medium Personnel Carrier'), also known as APS-1V1^[1] is an armored vehicle made by Pindad. It is a further development of the APR-1V 4×4 wheel drive run by BPPT and Pindad.^[2]

The results of this development and refinement resulted in APS-1 with 6×4 and APS-2 6×6 wheel drive, with a chassis derived from Perkasa trucks.^[3][4]

History

The APS vehicle prototype (also known as APS-1) was built using the Perkasa truck chassis made by the Wahana Perkasa Auto Jaya (PT Texmaco) factory, Subang, West Java. The APS-1 armored vehicle has a capacity of 13 soldiers in which the driver sits in a separate cabin right next to the engine housing. Furthermore, the APS-1 design was refined by Pindad and BPPT, resulting in the APS-1 V1 variant (also known as APS-2).^[1]

The first appearance of the APS-2 in public was during the 2006 PTI (Pameran Teknologi & Industri - Technology & Industry Exhibition) at the Plaza Parkir Timur Senayan, 19–22 September 2006.^[1]

On January 13, 2010, 33 APS-2 armored units were handed over by Pindad.^[5] The total number of armored vehicles that have been submitted to the Ministry of Defense is 93 out of 150 APS-2 6×6 armored units and 4 reconnaissance units ordered by the Ministry of Defense, while the remaining 61 units with contract value of Rp473 billion is planned to be completed in 2010. Of the 33 units submitted, 13 units will be used by TNI troops for peacekeeping missions in Lebanon.^[6]

However, there seems to be a naming error in this order, where the actual order is the APS 6×6 which is Anoa.^[7]

Design

The position of the engine is shifted from the driver's side to the center. This allows the commander and the rider to sit next to each other which can also help increase situational awareness for the driver.

At first glance, the APS-2 design resembles the Anoa 6×6 armored car.

See also

• VAB

References

1. Sawiyya, Rangga Baswara (2019-01-06). "Pindad APS-1, Cikal Bakal Lahirnya Panser Anoa". Airspace Review. Retrieved 2021-04-03.
2. "Panser APS-2 Buatan Pindad Siap Melaju". 14 January 2010.
3. "PINDAD MEMBUAT PANSER" (in Indonesian). Pikiran Rakyat Online. Retrieved 2011-11-14.
4. "BPPT-PINDAD BERENCANA KEMBANGKAN TANK UNTUK KEBUTUHAN TNI" (in Indonesian). Dephan. 2008-10-29. Retrieved 2011-11-14.
5. "Panser APS-2 Buatan Pindad Siap Melaju". republika.co.id. 14 January 2010. Retrieved 3 March 2024.
6. "PT. Pindad (Persero) - PT. PINDAD SERAHKAN 33 UNIT PANSER APS-2 6X6 KE KEMENTERIAN PERTAHANAN". www.pindad.com. Retrieved 2021-04-03.
7. "Spesifikasi Panser Pindad yang diminati Malaysia". merdeka.com. 2012-04-17. Retrieved 2021-04-03.