Italian destroyer Nicolò Zeno

Nicolò Zeno at anchor
History
Kingdom of Italy
NameNicolò Zeno
NamesakeNicolò Zeno (c. 1326–c. 1402), Venetian nobleman
BuilderCantieri navali del Quarnaro, Fiume
Laid down5 June 1927
Launched12 August 1928
Completed27 May 1930
FateScuttled 9 September 1943
General characteristics (as built)
Class and typeNavigatori-class destroyer
Displacement
Length107.3 m (352 ft)
Beam10.2 m (33 ft 6 in)
Draught3.5 m (11 ft 6 in)
Installed power
Propulsion2 shafts; 2 geared steam turbines
Speed32 knots (59.3 km/h; 36.8 mph)
Range3,800 nmi (7,000 km; 4,400 mi) at 18 knots (33 km/h; 21 mph) (designed)
Complement222–225 (wartime)
Armament

Nicolò Zeno was one of a dozen Navigatori-class destroyers built for the Regia Marina (Royal Italian Navy) in the late 1920s. Completed in 1930, she served in World War II.

Design and description

The Navigatori-class destroyers were designed to counter the large French destroyers of the Jaguar and Guépard classes.[1] They had an overall length of 107.3 meters (352 ft), a beam of 10.2 meters (33 ft 6 in) and a mean draft of 3.5 meters (11 ft 6 in).[2] They displaced 1,900 metric tons (1,900 long tons) at standard load, and 2,580 metric tons (2,540 long tons) at deep load. Their complement during wartime was 222–225 officers and enlisted men.[3]

The Navigatoris were powered by two Belluzzo geared steam turbines, each driving one propeller shaft using steam supplied by four Yarrow boilers. The turbines were designed to produce 55,000 shaft horsepower (41,000 kW)[3] and a speed of 32 knots (59 km/h; 37 mph) in service, although the ships reached speeds of 38–41 knots (70–76 km/h; 44–47 mph) during their sea trials while lightly loaded.[4] They carried enough fuel oil to give them a range of 3,800 nautical miles (7,000 km; 4,400 mi) at a speed of 18 knots (33 km/h; 21 mph).[3]

Their main battery consisted of six 120-millimeter (4.7 in) guns in three twin-gun turrets, one each fore and aft of the superstructure and the third amidships.[5] Anti-aircraft (AA) defense for the Navigatori-class ships was provided by a pair of 40-millimeter (1.6 in) AA guns in single mounts abreast the forward funnel and a pair of twin-gun mounts for 13.2-millimeter (0.52 in) machine guns. They were equipped with six 533-millimeter (21 in) torpedo tubes in two triple mounts amidships. The Navigatoris could carry 86–104 mines.[4]

Construction and career

Nicolò Zeno was laid down by Cantieri navali del Quarnaro at their Fiume shipyard on 5 June 1927, launched on 12 August 1928 and commissioned on 27 May 1930.[2]

While at Brindisi, Italy, in blackout conditions on 27 September 1940, Nicolò Zeno collided with the destroyer Augusto Riboty.[6]

Citations

  1. ^ Ando, p. 15
  2. ^ a b Whitley, p. 162
  3. ^ a b c Ando, p. 16
  4. ^ a b Roberts, p. 299
  5. ^ Fraccaroli, p. 49
  6. ^ Trentoincina (in Italian).

Bibliography

  • Ando, Elio (1978). "The Italian Navigatori Class, 1928". In Preston, Antony (ed.). Super Destroyers. Warship Special. Vol. 2. London: Conway Maritime Press. ISBN 0-85177-131-9.
  • Brescia, Maurizio (2012). Mussolini's Navy: A Reference Guide to the Regina Marina 1930–45. Annapolis, Maryland: Naval Institute Press. ISBN 978-1-59114-544-8.
  • Fraccaroli, Aldo (1968). Italian Warships of World War II. Shepperton, UK: Ian Allan. ISBN 0-7110-0002-6.
  • Roberts, John (1980). "Italy". In Chesneau, Roger (ed.). Conway's All the World's Fighting Ships 1922–1946. New York: Mayflower Books. pp. 280–317. ISBN 0-8317-0303-2.
  • Rohwer, Jürgen (2005). Chronology of the War at Sea 1939–1945: The Naval History of World War Two (Third Revised ed.). Annapolis, Maryland: Naval Institute Press. ISBN 1-59114-119-2.
  • Whitley, M. J. (1988). Destroyers of World War 2: An International Encyclopedia. Annapolis, Maryland: Naval Institute Press. ISBN 1-85409-521-8.