The north-eastern end of the Federal Highway is located at its junction with Hume Highway near the rural city of Goulburn. It runs 72.7 km (45.2 mi) southwest to Canberra, the national capital of Australia, where its southwestern end is located at the intersection of Northbourne Avenue and Barton Highway. The Federal Highway passes the villages of Wollogorang, Collector and Sutton, as well as skirting the western side of the endorheic basin containing Lake George.
Route
Federal Highway is a motorway-standard roadway linking from the interchange with Hume Highway at Yarra, southeast of Goulburn, to Canberra in the Australian Capital Territory. The roadway has a continuous 110 km/h (68 mph) speed limit within New South Wales northbound. A southbound section between the Great Dividing Range, south of Yarra, and Rowes Lagoon, north of Collector, is on an old and winding alignment and has a speed limit of 100k/h with many lower advisory speed signs. Within the Australian Capital Territory the posted speed limit is 100 km/h (62 mph) between the State-border and Antill Street, 80 km/h (50 mph) between Antil Street and Flemington Road, and 70 km/h (43 mph) between Flemington Road and the end of the road at Barton Highway (where the road runs parallel with the Canberra Metro light rail route). The entire length of the roadway is dual carriageway with 2 lanes in each direction.
History
In New South Wales, the passing of the Main Roads Act of 1924[5] through the Parliament of New South Wales provided for the declaration of Main Roads, roads partially funded by the State government through the Main Roads Board (MRB). The New South Wales section of Federal Highway was declared (as Main Road No. 3) on 8 August 1928, from its interchange with Hume Highway in Yarra, via Collector and Geary's Gap, to the interstate border;[4] with the passing of the Main Roads (Amendment) Act of 1929[6] to provide for additional declarations of State Highways and Trunk Roads, this was amended to State Highway 3 on 8 April 1929. Construction had already been completed and traffic was already using the portion of the highway within New South Wales by December 1930.[7]
In the Federal Capital Territory, the local Sydney-Canberra Road was officially declared part of Federal Highway in September 1928.[8] Surveying and levelling had finished and work had started in April 1929[9] to connect to the NSW portion of the road, with the contract awarded to John Fowler (Aust) Ltd, to construct a 6-mile section of highway from Canberra (today Lyneham) to the interstate boundary.[10] Approaching completion by February 1930,[11] it was officially completed and opened on 25 February 1931.[3]
The passing of the Roads Act of 1993[12] through the Parliament of New South Wales updated road classifications and the way they could be declared within New South Wales. Under this act, Federal Highway today retains its declaration as Highway 3, from Yarra to the interstate border with the ACT.[13]
Federal Highway was allocated National Route 23 across its entire length in 1955. The Whitlam government introduced the federal National Roads Act 1974,[14] where roads declared as a National Highway were still the responsibility of the states for road construction and maintenance, but were fully compensated by the Federal government for money spent on approved projects.[14]: S7 As an important interstate link between the capitals of New South Wales and the Australian Capital Territory, the Federal Highway was declared a National Highway in 1974 and was consequently re-allocated National Highway 23.[15] With the conversion to the newer alphanumeric system in 2013, this was replaced with route M23 across the New South Wales' section,[16] and route A23 across the Australian Capital Territory's section; an eastern portion was upgraded to route M23 when Majura Parkway opened in 2016.[17]
^ ab"Main Roads Act, 1924-1927". Government Gazette of the State of New South Wales. No. 110. National Library of Australia. 17 August 1928. pp. 3814–20. Retrieved 1 August 2022.
