Aerospace is a term used to collectively refer to the atmosphere and outer space. Aerospace activity is very diverse, with a multitude of commercial, industrial, and military applications. Aerospace engineering consists of aeronautics and astronautics. Aerospace organizations research, design, manufacture, operate, maintain, and repair both aircraft and spacecraft.[1]
The beginning of space and the ending of the air are proposed as 100km (62mi) above the ground according to the physical explanation that the air density is too low for a lifting body to generate meaningful lift force without exceeding orbital velocity.[2]
Modern aerospace began with Engineer George Cayley in 1799. Cayley proposed an aircraft with a "fixed wing and a horizontal and vertical tail," defining characteristics of the modern aeroplane.[3]
The 19th century saw the creation of the Aeronautical Society of Great Britain (1866), the American Rocketry Society, and the Institute of Aeronautical Sciences, all of which made aeronautics a more serious scientific discipline.[3] Airmen like Otto Lilienthal, who introduced camberedairfoils in 1891, used gliders to analyze aerodynamic forces.[3] The Wright brothers were interested in Lilienthal's work and read several of his publications.[3] They also found inspiration in Octave Chanute, an airman and the author of Progress in Flying Machines (1894).[3] It was the preliminary work of Cayley, Lilienthal, Chanute, and other early aerospace engineers that brought about the first powered sustained flight at Kitty Hawk, North Carolina on December 17, 1903, by the Wright brothers.
War and science fiction inspired scientists and engineers like Konstantin Tsiolkovsky and Wernher von Braun to achieve flight beyond the atmosphere. World War II inspired Wernher von Braun to create the V1 and V2 rockets.
Aerospace manufacturing is a high-technology industry that produces "aircraft, guided missiles, space vehicles, aircraft engines, propulsion units, and related parts".[4] Most of the industry is geared toward governmental work. For each original equipment manufacturer (OEM), the US government has assigned a Commercial and Government Entity (CAGE) code. These codes help to identify each manufacturer, repair facilities, and other critical aftermarket vendors in the aerospace industry.
In the United States, the Department of Defense and the National Aeronautics and Space Administration (NASA) are the two largest consumers of aerospace technology and products. Others include the very large airline industry. The aerospace industry employed 472,000 wage and salary workers in 2006.[5] Most of those jobs were in Washington state and in California, with Missouri, New York and Texas also being important. The leading aerospace manufacturers in the U.S. are Boeing, United Technologies Corporation, SpaceX, Northrop Grumman and Lockheed Martin. As talented American employees age and retire, these manufacturers face an expanding labor shortfall. In order to supply the industrial sector with fresh workers, apprenticeship programs like the Aerospace Joint Apprenticeship Council (AJAC) collaborate with community colleges and aerospace firms in Washington state.
In the European Union, aerospace companies such as Airbus SE, Safran, Thales, Dassault Aviation, Leonardo and Saab AB account for a large share of the global aerospace industry and research effort, with the European Space Agency as one of the largest consumers of aerospace technology and products.
The United Kingdom formerly attempted to maintain its own large aerospace industry, making its own airliners and warplanes, but it has largely turned its lot over to cooperative efforts with continental companies, and it has turned into a large import customer, too, from countries such as the United States. However, the UK has a very active aerospace sector, with major companies such as BAE Systems, supplying fully assembled aircraft, aircraft components, sub-assemblies and sub-systems to other manufacturers, both in Europe and all over the world.
Canada has formerly manufactured some of its own designs for jet warplanes, etc. (e.g. the CF-100 fighter), but for some decades, it has relied on imports from the United States and Europe to fill these needs. However Canada still manufactures some military aircraft although they are generally not combat capable. Another notable example was the late 1950s development of the Avro Canada CF-105 Arrow, a supersonic fighter-interceptor whose 1959 cancellation was considered highly controversial.
France has continued to make its own warplanes for its air force and navy, and Sweden continues to make its own warplanes for the Swedish Air Force—especially in support of its position as a neutral country. (See Saab AB.) Other European countries either team up in making fighters (such as the Panavia Tornado and the Eurofighter Typhoon), or else to import them from the United States.
In the People's Republic of China, Beijing, Xi'an, Chengdu, Shanghai, Shenyang and Nanchang are major research and manufacture centers of the aerospace industry. China has developed an extensive capability to design, test and produce military aircraft, missiles and space vehicles. Despite the cancellation in 1983 of the experimental Shanghai Y-10, China is still developing its civil aerospace industry.
The aircraft parts industry was born out of the sale of second-hand or used aircraft parts from the aerospace manufacture sector. Within the United States there is a specific process that parts brokers or resellers must follow. This includes leveraging a certified repair station to overhaul and "tag" a part. This certification guarantees that a part was repaired or overhauled to meet OEM specifications. Once a part is overhauled its value is determined from the supply and demand of the aerospace market. When an airline has an aircraft on the ground, the part that the airline requires to get the plane back into service becomes invaluable. This can drive the market for specific parts. There are several online marketplaces that assist with the commodity selling of aircraft parts.
In the aerospace and defense industry, much consolidation has occurred at the end of the 20th century, going into the 21st century. Between 1988 and 2011, more than 6,068 mergers & acquisitions with a total known value of US$678 billion have been announced worldwide.[6] The largest transactions have been:
The 1927 large Propeller Research Tunnel at NACA Langley confirmed that the landing gear was a major source of drag, in 1930 the Boeing Monomail featured a retractable gear.
The flush rivet displaced the domed rivet in the 1930s and pneumatic rivet guns work in combination with a heavy reaction bucking bar; not depending on plastic deformation, specialist rivets were developed to improve fatigue life as shear fasteners like the Hi-Lok, threaded pins tightened until a collar breaks off with enough torque.
At the end of World War I, piston engine power could be boosted by compressing intake air with a compressor, also compensating for decreasing air density with altitude, improved with 1930s turbochargers for the Boeing B-17 and the first pressurized airliners.
As US airlines were interested in high-altitude flying in the mid-1930s, the Lockheed XC-35 with a pressurized cabin was tested in 1937 and the Boeing 307 Stratoliner would be the first pressurized airliner to enter commercial service.
In 1933, Plexiglas, a transparent Acrylic plastic, was introduced in Germany and shortly before World War II, was first used for aircraft windshields as it is lighter than glass, and the bubble canopy improved fighter pilots visibility.
In January 1930, Royal Air Force pilot and engineer Frank Whittle filed a patent for a gas turbine aircraft engine with an inlet, compressor, combustor, turbine and nozzle, while an independent turbojet was developed by researcher Hans von Ohain in Germany; both engines ran within weeks in early 1937 and the Heinkel HeS 3-propelled Heinkel He 178 experimental aircraft made its first flight on Aug 27, 1939 while the Whittle W.1-powered Gloster E.28/39 prototype flew on May 15, 1941.
In the early 1940s, British Hurricane and Spitfire pilots wore g-suits to prevent G-LOC due to blood pooling in the lower body in high g situations; Mayo Clinic researchers developed air-filled bladders to replace water-filled bladders and in 1943 the US military began using pressure suits from the David Clark Company.
The modern ejection seat was developed during World War II, a seat on rails ejected by rockets before deploying a parachute, which could have been enhanced by the USAF in the late 1960s as a turbojet-powered autogyro with 50 nm of range, the Kaman KSA-100 SAVER.
In 1942, numerical control machining was conceived by machinist John T. Parsons to cut complex structures from solid blocks of alloy, rather than assembling them, improving quality, reducing weight, and saving time and cost to produce bulkheads or wing skins.
The UK Miles M.52 supersonic aircraft was to have an afterburner, augmenting a turbojet thrust by burning additional fuel in the nozzle, but was cancelled in 1946.
Functional safety relates to a part of the general safety of a system or a piece of equipment. It implies that the system or equipment can be operated properly and without causing any danger, risk, damage or injury.
Functional safety is crucial in the aerospace industry, which allows no compromises or negligence. In this respect, supervisory bodies, such as the European Aviation Safety Agency (EASA
),[12] regulate the aerospace market with strict certification standards. This is meant to reach and ensure the highest possible level of safety. The standards AS 9100 in America, EN 9100 on the European market or JISQ 9100 in Asia particularly address the aerospace and aviation industry. These are standards applying to the functional safety of aerospace vehicles. Some companies are therefore specialized in the certification, inspection verification and testing of the vehicles and spare parts to ensure and attest compliance with the appropriate regulations.
Spinoffs
Spinoffs refer to any technology that is a direct result of coding or products created by NASA and redesigned for an alternate purpose.[13] These technological advancements are one of the primary results of the aerospace industry, with $5.2 billion worth of revenue generated by spinoff technology, including computers and cellular devices.[13] These spinoffs have applications in a variety of different fields including medicine, transportation, energy, consumer goods, public safety and more.[13] NASA publishes an annual report called "Spinoffs", regarding many of the specific products and benefits to the aforementioned areas in an effort to highlight some of the ways funding is put to use.[14] For example, in the most recent edition of this publication, "Spinoffs 2015", endoscopes are featured as one of the medical derivations of aerospace achievement.[13] This device enables more precise and subsequently cost-effective neurosurgery by reducing complications through a minimally invasive procedure that abbreviates hospitalization.[13] "These NASA technologies are not only giving companies and entrepreneurs a competitive edge in their own industries, but are also helping to shape budding industries, such as commercial lunar landers," said Daniel Lockney.[15]
Blockley, Richard, and Wei Shyy. Encyclopedia of aerospace engineering (American Institute of Aeronautics and Astronautics, Inc., 2010).
Brunton, Steven L., et al. "Data-driven aerospace engineering: reframing the industry with machine learning." AIAA Journal.. 59.8 (2021): 2820-2847. online
Davis, Jeffrey R., Robert Johnson, and Jan Stepanek, eds. Fundamentals of aerospace medicine (Lippincott Williams & Wilkins, 2008) online.
Mouritz, Adrian P. Introduction to aerospace materials (Elsevier, 2012) online.
Petrescu, Relly Victoria, et al. "Modern propulsions for aerospace-a review." Journal of Aircraft and Spacecraft Technology 1.1 (2017).
Phero, Graham C., and Kessler Sterne. "The aerospace revolution: development, intellectual property, and value." (2022). online
Wills, Jocelyn. Tug of War: Surveillance Capitalism, Military Contracting, and the Rise of the Security State (McGill-Queen's University Press, 2017), scholarly history of MDA in Canada. online book review
External links
Look up aerospace in Wiktionary, the free dictionary.
Outline of aerospace Aerospace engineering Aerospace Aerospace manufacturer Vertical Aerospace Toulouse Aerospace The Aerospace Corporation British Aerospace Spar Aerospace UP Aerospace Magellan Aerospace Stelia Aerospace Ball Aerospace & Technologies B/E Aerospace ST Engineering Aerospace Royal Netherlands Aerospace Centre Aerospace materials XCOR Aerospace Aerospace Museum of California Zodiac Aerospace Diehl Aerospace Asian Aerospace M7 Aerospace Align Aerospace GE Aerospace (1960s) China Aerospace Science and Technology Corporation Aerospace force Bridger Aerospace Russian Aerospace Forces…
Aerospace Industries Association Armadillo Aerospace Garuda Aerospace Niagara Aerospace Museum Davis Aerospace Technical High School National Aerospace Week Collins Aerospace Mojave Aerospace Ventures Africa Aerospace and Defence Expo Pioneer Aerospace Corporation VT Mobile Aerospace Engineering List of Russian aerospace engineers UTC Aerospace Systems Ford Aerospace Sunward Aerospace Group Honeywell Aerospace Technologies Turkish Aerospace Industries Korea Aerospace Industries Samsung Aerospace Bigelow Aerospace Progress in Aerospace Sciences Aerospace bearing Department of Aerospace Science and Technology Howmet Aerospace TU Delft Faculty of Aerospace Engineering Aerospace industry in the United Kingdom Heart Aerospace Griffon Aerospace 10th Aerospace Defense Group British Aerospace Jetstream BluShift Aerospace National Aerospace Standard BrahMos Aerospace Dubai Aerospace Enterprise China Aerospace International Holdings Aerospace Walk of Honor Beijing Aerospace Flight Control Center Philippine Aerospace Development Corporation China Aerospace Studies Institute National Aerospace Laboratory 22nd Strategic Aerospace Division Kongsberg Defence & Aerospace Firefly Aerospace Bye Aer