Each horizontal contour level row of fiber rolls is installed on slopes, ending with one at the base of the slope, below an active construction area before soil disturbance (earth moving) begins. The space between each row of fiber roll is dependent on the steepness of the slope. The steeper the slope, the more rows of evenly spaced horizontal contour level fiber rolls are used. Each fiber roll is installed on a horizontal contour level in shallow trenches 2 to 4 inches (5 to 10 cm) deep and fastened to the ground with wooden stakes.
Properly installed fiber rolls are effective at trapping sediment, generally more effectively than straw bales.[2][3] During rain storms, the rolls intercept surface stormwaterrunoff (but not concentrating or channeling the runoff) and reduce the velocity of flow. Water passes through a fiber roll while leaving behind the sediment on the uphill side of the roll, thereby reducing sediment erosion.
Limitations
Fiber Rolls have several limitations to their uses:[4]
Fiber rolls may be difficult to move once they become saturated with water.
Fiber rolls should not be used on very steep land that is prone to mudslides, landslides or creep.
If fiber rolls are not properly staked into the ground, they may be carried away by high flows.
^"Fiber Rolls". National Pollutant Discharge Elimination System (NPDES). Environmental Protection Agency (EPA). Archived from the original on December 14, 2013. Retrieved December 14, 2013.
External links
Erosion Control Technology Council - a trade organization dedicated to the education and standardization of the erosion control industry
Erosion Control - a trade magazine for the erosion control and construction industries
