Commuter Airlines was a US regional commuter airline that operated from 1964 to 1984, based for many years at Greater Binghamton Airport, Broome County, New York, and later at Cleveland Hopkins International Airport. Beginning life as Broome County Aviation, the operation included local air taxi, manufacturing (& subsequently operating) modified Beech 18s, and scheduled services with 19- and 50-seat airliners to Washington D.C., and all three main airports in the New York Metropolitan area. In 1982 it was re-branded as Freedom Airlines, but following the death of the founder (Jerry Winston) in 1984, the airline ceased operations.
During the next two decades the airline side of the business expanded, increasing the number of destinations served to include White Plains, LaGuardia and JFK in New York City, Newark, Boston, Wilkes Barre/Scranton, and Allentown Pennsylvania, and others.[2]
Freedom Airlines
With the advent of the 1978 Airline Deregulation Act, in the late 70's and early 80's Commuter Airlines underwent dramatic expansion, concentrating the operation on two types; Swearingen Metroliners (flying as Commuter Airlines), and the Convair CV-580s (now flying as Freedom Airlines). By mid-1982 they had also consolidated their operations base at Cleveland Hopkins International Airport and re-branded themselves purely as Freedom Airlines. Meanwhile the route network grew rapidly to encompass a much wider variety of destinations such as Chicago (wef Aug '81), Baltimore (wef Jan '82), Allentown A-B-E Airport, (wef May '82), Norfolk, Detroit, and e.g. multiple destinations in South Carolina.
[3][4]
In the summer of 1984 founder Jerry Winston died, and the airline was put up for sale. Although still a going concern, without a buyer to take the helm, the airline ceased operations, with the Convair CV-580s being purchased by Air Ontario.[2]
Commuter Aircraft Manufacturing Corp
The Dumod Corporation was one of a number of companies that specialised in upgrading Beech 18s, primarily featuring a tricycle undercarriage replacement for the original tailwheel design. Their most ambitious project was the Dumod Liner, and the manufacturing rights for this conversion were purchased by Winston on behalf of BCA/Commuter Airlines.[5] The Dumod Liner had a stretched fuselage allowing 15 seats, a nose wheel/tricycle undercarriage, and a triple tail similar to the Lockheed Constellation. Initially five conversions were planned, but only three were completed, and all three of this unique design were operated by Commuter Airlines.[6]
On 22 March 1970, Commuter Airlines Flight 502 from Binghampton to Washington D.C., operated by Beech 18 (Dumod Liner) N497DM, crashed after a rejected take-off from Binghamton-Broome County Airport killing the Captain and two passengers. The co-pilot and seven remaining passengers survived.
After taking off in snow conditions, the aircraft became airborne, but was difficult to control even after the landing gear was raised. The captain elected to reject the take-off, and made a smooth wheels-up landing. The aircraft slid the remaining length of the runway, over an embankment, and into approach light structures, where it subsequently caught fire and was written off.
The NTSB report determined the probable cause of the accident was the attempt of the pilot-in command to take off with snow adhering to the airfoil surfaces, causing a degradation of aircraft performance and loss of control following lift-off.[8]