Clupeidae

Clupeidae
Atlantic herring, Clupea harengus
Scientific classification
Domain:	Eukaryota
Kingdom:	Animalia
Phylum:	Chordata
Class:	Actinopterygii
Order:	Clupeiformes
Suborder:	Clupeoidei
Family:	Clupeidae G. Cuvier, 1817[1]
Genera
See text

Clupeidae is a family of clupeiform ray-finned fishes, comprising, for instance, the herrings and sprats. Many members of the family have a body protected with shiny cycloid (very smooth and uniform) scales, a single dorsal fin, and a fusiform body for quick, evasive swimming and pursuit of prey composed of small planktonic animals. Due to their small size and position in the lower trophic level of many marine food webs, the levels of methylmercury they bioaccumulate are very low, reducing the risk of mercury poisoning when consumed.

Description and biology

Clupeids are mostly marine forage fish, although a few species are found in fresh water. No species has scales on the head, and some are entirely scaleless. The lateral line is short or absent, and the teeth are unusually small where they are present at all. Clupeids typically feed on plankton, and range from 2 to 75 cm (0.79 to 29.53 in) in length.^[2]

Clupeids spawn huge numbers of eggs (up to 200,000 in some species) near the surface of the water. After hatching, the larvae live among the plankton until they develop a swim bladder and transform into adults. These eggs and fry are not protected or tended to by parents. The adults typically live in large shoals, seeking protection from piscivorous predators such as birds, sharks and other predatory fish, toothed whales, marine mammals, and jellyfish. They also form bait balls.^[3][2]

Commercially important species of the Clupeidae include the Atlantic and Baltic herrings (Clupea harengus), and the Pacific herring (C. pallasii).

Feeding physiology

The Clupeidae family primarily feed on small planktonic organisms. The teeth of members of this family are either reduced or absent, reduced teeth are miniature teeth that would be barely visible and line the interior of the fish's mouth. The structure of these teeth indicate that these organisms do not need to cut or tear their prey items as they would need fully formed teeth to complete this process. They do, however, possess long gill rakers that are designed for sifting plankton and other small particles out of the water as it passes through their gills.^{[citation needed]} Gill rakers are protrusions along the gill arch, opposing the gill filaments, that help aquatic organisms to trap food particles.

The diet of many clupeids primarily consists of phytoplankton and plant matter during their larval stages. As the fish mature this diet begins to shift towards larger and more substantive organisms, including more zooplankton and copepods. This change in diet is possible due to their increase in body and gill raker size, which allows them to capture and process larger organisms to support themselves. Small organisms like these do not need to be ground or torn apart for consumption so pronounced teeth would not serve a purpose in the feeding habits of Clupeidae, instead the use of filter feeding allows for much more efficient nutrient collection.

The fusiform body shape of Clupeidae is also advantageous to their trophic ecology. The tapering body form is a highly hydrodynamic form that allows for quick increases in speed and a high maximum speed. Moving at high speeds allows the members of this family to regulate their feeding habits and avoid predators. Clupeidae can moderate the speed at which they swim to increase their uptake of nutrients. As with all filter feeders, Clupeidae cannot take in food if nutrient rich water does not pass over their gills. To moderate this, members of this family have been found to increase their swimming speed when they sense that there is a high concentration of food items in order to take advantage of this feeding period.^[4] Keeping a high swimming speed during periods of low food availability would not be efficient to maintain over long periods of time as the organisms would not net as much energy as they may need to in order to sustain themselves and increase their fitness. Increasing their swimming speed during feeding periods would allow them to take in more plankton while not suffering consequences from maintaining that speed.

Taxonomy

The following genera are classified within the family:^[5]

• Clupea Linnaeus, 1758
• Ethmidium W. F. Thompson, 1916
• Hyperlophus Ogilby, 1892
• Potamalosa Ogilby, 1897
• Ramnogaster Whitehead, 1965
• Sprattus Girgensohn 1846
• Strangomera Whitehead,genera from ECoF 1965

The family arguably also contains the "Sundasalangidae", a paedomorphic taxon first thought to be a distinct salmoniform family, but then discovered to be deeply nested in the Clupeidae.^[2]

Until recently, the concept of Clupeidae was broader, but it has been subdivided into several distinct families (e.g. Alosidae)

Fossil genera

Known fossil genera (albeit most classified under the sensu lato concept) include:^[6][7]

• †Alisea
• †Austroclupea^[8]
• †Audenaerdia
• †Bolcaichthys
• †Chasmoclupea
• †Clupeidarum [otolith]
• †Clupeops
• †Eoalosa
• †Eosardinella
• †Etringus
• †Ganoessus
• †Ganolytes
• †Gosiutichthys
• †Horaclupea
• †?Hypsospondylus
• †Karaganops
• †Knightia
• †Marambionella
• †Maicopiella
• †Moldavichthys
• †Paleopiquitinga
• †Primisardinella
• †Pseudohilsa
• †Quisque
• †Rupelia
• †Sarmatella (=†Illusionella)^[9]
• †Trollichthys
• †Waihaoclupea
• †Wisslerius
• †Xenophanis
• †Xyne
• †Xyrinius

References

1. Richard van der Laan; William N. Eschmeyer & Ronald Fricke (2014). "Family-group names of recent fishes". Zootaxa. 3882 (2): 1–230. doi:10.11646/zootaxa.3882.1.1. PMID 25543675.
2. Froese, Rainer; Pauly, Daniel (eds.). "Family Clupeidae". FishBase. July 2023 version.
3. Nelson, Gareth (1998). Paxton, J.R.; Eschmeyer, W.N. (eds.). Encyclopedia of Fishes. San Diego: Academic Press. pp. 91–92. ISBN 0-12-547665-5.
4. Durbin, Ann; Durbin, Edward; Verity, Peter; Smayda, Thomas (1985). "Voluntary swimming speeds and respiration rates of a filter-feeding planktivore, the Atlantic menhaden, Brevoortia tyrannus (Pisces: Clupeidae)". Fishery Bulletin. 78 (4): 877–886 – via Google Books.
5. Eschmeyer, William N.; Fricke, Ron & van der Laan, Richard (eds.). "Genera in the family Clupeidae". Catalog of Fishes. California Academy of Sciences. Retrieved 18 November 2024.
6. "PBDB". paleobiodb.org. Retrieved 2024-02-26.
7. "A new clupeid fish from the upper Miocene of Greece: A possible Hilsa relative from the Mediterranean - Acta Palaeontologica Polonica". www.app.pan.pl. Retrieved 2024-04-11.
8. Gallo, Valéria; Calvo, Jorge O.; Kellner, Alexander W. A. (2011-04-01). "First record of a clupeomorph fish in the Neuquén Group (Portezuelo Formation), Upper Cretaceous of Patagonia, Argentina". Cretaceous Research. 32 (2): 223–235. Bibcode:2011CrRes..32..223G. doi:10.1016/j.cretres.2010.12.006. ISSN 0195-6671.
9. Baykina, E. M. (2013-09-01). "A revision of Clupea doljeana Kramberger and Sarmatella vukotinovici (Kramberger) (Pisces, Clupeidae) from the Sarmatian of Croatia". Paleontological Journal. 47 (5): 523–532. Bibcode:2013PalJ...47..523B. doi:10.1134/S0031030113050043. ISSN 1555-6174.