The bhangmeter was invented, and the first proof-of-concept device was built, in 1948 to measure the nuclear test detonations of Operation Sandstone. Prototype and production instruments were later built by EG&G, and the name "bhangmeter" was coined in 1950 by Frederick Reines.[3] Bhangmeters became standard instruments used to observe US nuclear tests. A Mod II bhangmeter was developed to observe the detonations of Operation Buster-Jangle (1951) and Operation Tumbler-Snapper (1952).[4] These tests lay the groundwork for a large deployment of nationwide North American bhangmeters with the Bomb Alarm System (1961-1967).
Bhangmeters were first installed, in 1961, aboard a modified US KC-135A aircraft monitoring the pre-announced Soviet test of Tsar Bomba.[7]
The Vela satellites were the first space-based observation devices jointly developed by the U.S. Air Force and the Atomic Energy Commission. The first generation of Vela satellites were not equipped with bhangmeters but with X-ray sensors to detect the intense single pulse of X-rays produced by a nuclear explosion.[8] The first satellites which incorporated bhangmeters were the Advanced Vela satellites.
Since 1980, bhangmeters have been included on US GPS navigation satellites.[9][10][11]
Description
The siliconphotodiode sensors are designed to detect the distinctive bright double pulse of visible light that is emitted from atmospheric nuclear weapons explosions.[2] This signature consists of a short and intense flash lasting around 1 millisecond, followed by a second much more prolonged and less intense emission of light taking a fraction of a second to several seconds to build up.[12] This signature, with a double intensity maximum, is characteristic of atmospheric nuclear explosions and is the result of the Earth's atmosphere becoming opaque to visible light and transparent again as the explosion's shock wave travels through it.[10]
The effect occurs because the surface of the early fireball is quickly overtaken by the expanding "case shock", the atmospheric shock wave composed of the ionised plasma of what was once the casing and other matter of the device.[13] Although it emits a considerable amount of light itself, it is opaque and prevents the far brighter fireball from shining through. The net result recorded is a decrease of the light visible from outer space as the shock wave expands, producing the first peak recorded by the bhangmeter.
As it expands, the shock wave cools off and becomes less opaque to the visible light produced by the inner fireball. The bhangmeter starts eventually to record an increase in visible light intensity. The expansion of the fireball leads to an increase of its surface area and consequently an increase of the amount of visible light radiated off to space. The fireball continues to cool down so the amount of light eventually starts to decrease, causing the second peak observed by the bhangmeter. The time between the first and second peaks can be used to determine its nuclear yield.[14]
The effect is unambiguous for explosions below about 30 kilometres (19 mi) altitude, but above this height a more ambiguous single pulse is produced.[15]
Origin of the name
The name of the detector is a pun[3] which was bestowed upon it by Fred Reines, one of the scientists working on the project. The name is derived from the Hindi word "bhang", a locally grown variety of cannabis which is smoked or drunk to induce intoxicating effects, the joke being that one would have to be on drugs to believe the bhangmeter detectors would work properly. This is in contrast to a "bangmeter" one might associate with detection of nuclear explosions.[3]
^ abBurr, William; Cohen, Avner; De Geer, Lars-Erik; Gilinsky, Victor; Polakow-Suransky, Sasha; Sokolski, Henry; Weiss, Leonard; Wright, Christopher (September 22, 2019). "Blast From the Past". Foreign Policy magazine. Retrieved June 23, 2020.
^ abcOgle, William E. (October 1985). "Bhangmeter — Prologue"(PDF). An account of the return to Nuclear Weapons testing by the United States after the test moratorium 1958-1961. United States Department of Energy — NV 291. p. 67. Archived from the original(PDF) on 2009-01-19. Retrieved 18 December 2008.
Tsipis, Kosta; Hafemeister, David W.; Janeway, Penny (1986). Arms control verification: the technologies that make it possible. Washington: Pergamon-Brassey's International Defense Publishers. ISBN9780080331720.