Amiga 1000 with external A1010 floppy disk drive and A1060 Sidecar
The CommodoreA1060 Sidecar is an expansion hardware device developed by Commodore and released in 1986 for the Amiga 1000 computer. It is an IBM Personal Computer XT-clone in an expansion case which connects to the expansion bus on the right side of the Amiga 1000 computer. It sits beside the computer similar to a motorcycle's sidecar.
The Sidecar is built around an Intel 8088 processor. All I/O from the PC side is performed by the Amiga. Software was included to allow data to be exchanged easily between the PC and the Amiga side of the system. The Sidecar had an internal hard disk accessible from both the MS-DOS and AmigaOS environments. This was the first hard drive produced by Commodore for the Amiga.
Video display and user input are performed through the Amiga's monitor, keyboard, and mouse. This allows the user to control both computers simultaneously.
Technical specifications
The Amiga Sidecar is a complete IBM PC XT system, with the exception of I/O devices and operations (which are handled by the Amiga).
RAM: 256 kB (expandable to 512 kB + 80 kB Dual Bus Memory)
Graphics Emulation: Dependent on Amiga settings. (can use 8-bit ISA graphics cards)
Sound Emulation: Dependent on Amiga settings. (can use real 8-bit ISA sound cards)
One internal 5.25" drive bay (normally fitted with a 360K 5.25" floppy drive)
3 x 8-bit ISA slots (for using PC expansion cards)
Amiga 1000 Expansion Bus connector (for Amiga connectivity)
Additional slot for an 8087 numeric coprocessor[1]
History
Early in its life, the Amiga was strong in entertainment and graphics software but lacked general productivity software such as word processors, spreadsheets and database software. These are the areas where the de facto business standard IBM PC excelled. Commodore's intent was to let the Amiga take advantage of PC compatibility to shore up its weakness in this category of software.
Bruce F. Webster wrote in the October 1985 issue of BYTE, after seeing the Amiga for the first time:[2]
The 86-pin [expansion port] gives whatever is sitting out there complete control of the machine (if it wants control). The disk-controller hardware can already handle 5¼-inch drives ... the keyboard is sufficiently populated [to] support most MS-DOS programs, and the screen resolutions (320 by 200, etc.) are, by an amazing coincidence, identical to those for most IBM graphics cards. How hard would it be to build a box with the necessary CPU and ROMs that would turn the Amiga into an IBM-compatible machine? Not very hard, I would think—certainly not as hard as it has been for the folks at Dayna Communications to get MacCharlie, which attempts to get the Mac run MS-DOS software, up and running.
Webster, in September 1986, noted the Sidecar's announcement as fulfilling his prediction.[3]Jerry Pournelle that month named the Sidecar his "number one pick of Spring COMDEX, stating that "it was eerie to watch Flight Simulator running as if on a PC and still see the famous Amiga bouncing ball in the background and a word-processing program running in the foreground".[4]
The Sidecar was developed by Commodore Germany, as was all of the Commodore PC-architecture based development. It was relatively expensive and it required a non-trivial amount of desktop space compared to the Amiga 1000 by itself. The device was also taller than the Amiga 1000, which made it seem even more aesthetically disconnected from the main system.
Besides the high price and the aesthetic issues, other factors contributed to the Sidecar's lack of adoption. The Amiga 2000 provided internal expansion slots, allowing the optional Bridgeboard card to replace the functionality of the Sidecar without needing a bulky external chassis. The popular Amiga 500 could not be used with the Sidecar at all, due to the expansion slot on the A500 residing on the left side of the chassis, as opposed to the right side on the A1000. Also, decent business and productivity software began to be released for AmigaOS, reducing the need to run MS-DOS applications on the Amiga.
This concept was continued in the later Amiga 2000 unit, containing four ISA slots intended for PC emulation expandability. Two slots were in-line with the Amiga Zorro II bus to allow installation of a Bridge board which, like the Sidecar, provided the core chipset of a PC on an expansion card, connected to both the Amiga and PC bus.
